u-boot/board/freescale/p1022ds/p1022ds.c
Timur Tabi 29b83d9833 powerpc/p1022ds: set the clock-frequency prop only if the clock is enabled
The clock-frequency property in an audio codec's device tree node is set to
the input clock frequency for that codec.  On the Freescale P1022DS board,
the input clock is enabled only if the hwconfig 'audclk' option is set.
Therefore, the property should only be set in the device tree if the clock
is actually enabled.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-09 15:53:38 -05:00

353 lines
8.7 KiB
C

/*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
* Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
* Timur Tabi <timur@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <common.h>
#include <command.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_mdio.h>
#include <tsec.h>
#include <asm/fsl_law.h>
#include <netdev.h>
#include <i2c.h>
#include <hwconfig.h>
#include "../common/ngpixis.h"
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
/* Set pmuxcr to allow both i2c1 and i2c2 */
setbits_be32(&gur->pmuxcr, 0x1000);
/* Read back the register to synchronize the write. */
in_be32(&gur->pmuxcr);
/* Set the pin muxing to enable ETSEC2. */
clrbits_be32(&gur->pmuxcr2, 0x001F8000);
/* Enable the SPI */
clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
return 0;
}
int checkboard(void)
{
u8 sw;
puts("Board: P1022DS ");
#ifdef CONFIG_PHYS_64BIT
puts("(36-bit addrmap) ");
#endif
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
switch ((sw & PIXIS_LBMAP_MASK) >> 6) {
case 0:
printf ("vBank: %u\n", ((sw & 0x30) >> 4));
break;
case 1:
printf ("NAND\n");
break;
case 2:
case 3:
puts ("Promjet\n");
break;
}
return 0;
}
#define CONFIG_TFP410_I2C_ADDR 0x38
/* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK 0x0c
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK 0x03
/* Route the I2C1 pins to the SSI port instead. */
#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI 0x08
/* Choose the 12.288Mhz codec reference clock */
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_12 0x02
/* Choose the 11.2896Mhz codec reference clock */
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11 0x01
/* Connect to USB2 */
#define CONFIG_PIXIS_BRDCFG0_USB2 0x10
/* Connect to TFM bus */
#define CONFIG_PIXIS_BRDCFG1_TDM 0x0c
/* Connect to SPI */
#define CONFIG_PIXIS_BRDCFG0_SPI 0x80
int misc_init_r(void)
{
u8 temp;
const char *audclk;
size_t arglen;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* For DVI, enable the TFP410 Encoder. */
temp = 0xBF;
if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
return -1;
if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
return -1;
debug("DVI Encoder Read: 0x%02x\n", temp);
temp = 0x10;
if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
return -1;
if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
return -1;
debug("DVI Encoder Read: 0x%02x\n",temp);
/* Enable the USB2 in PMUXCR2 and FGPA */
if (hwconfig("usb2")) {
clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK,
MPC85xx_PMUXCR2_USB);
setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2);
}
/* tdm and audio can not enable simultaneous*/
if (hwconfig("tdm") && hwconfig("audclk")){
printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n");
return -1;
}
/* Enable the TDM in PMUXCR and FGPA */
if (hwconfig("tdm")) {
clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK,
MPC85xx_PMUXCR_TDM);
setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM);
/* TDM need some configration option by SPI */
clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK,
MPC85xx_PMUXCR_SPI);
setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI);
}
/*
* Enable the reference clock for the WM8776 codec, and route the MUX
* pins for SSI. The default is the 12.288 MHz clock
*/
if (hwconfig("audclk")) {
temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
audclk = hwconfig_arg("audclk", &arglen);
/* Check the first two chars only */
if (audclk && (strncmp(audclk, "11", 2) == 0))
temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
else
temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
setbits_8(&pixis->brdcfg1, temp);
}
return 0;
}
/*
* A list of PCI and SATA slots
*/
enum slot_id {
SLOT_PCIE1 = 1,
SLOT_PCIE2,
SLOT_PCIE3,
SLOT_PCIE4,
SLOT_PCIE5,
SLOT_SATA1,
SLOT_SATA2
};
/*
* This array maps the slot identifiers to their names on the P1022DS board.
*/
static const char *slot_names[] = {
[SLOT_PCIE1] = "Slot 1",
[SLOT_PCIE2] = "Slot 2",
[SLOT_PCIE3] = "Slot 3",
[SLOT_PCIE4] = "Slot 4",
[SLOT_PCIE5] = "Mini-PCIe",
[SLOT_SATA1] = "SATA 1",
[SLOT_SATA2] = "SATA 2",
};
/*
* This array maps a given SERDES configuration and SERDES device to the PCI or
* SATA slot that it connects to. This mapping is hard-coded in the FPGA.
*/
static u8 serdes_dev_slot[][SATA2 + 1] = {
[0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
[0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
[0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
[PCIE2] = SLOT_PCIE5 },
[0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
[PCIE2] = SLOT_PCIE3,
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
[0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
[PCIE2] = SLOT_PCIE3 },
[0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
[PCIE2] = SLOT_PCIE3,
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
[0x1c] = { [PCIE1] = SLOT_PCIE1,
[SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
[0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
[0x1f] = { [PCIE1] = SLOT_PCIE1 },
};
/*
* Returns the name of the slot to which the PCIe or SATA controller is
* connected
*/
const char *board_serdes_name(enum srds_prtcl device)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
u32 pordevsr = in_be32(&gur->pordevsr);
unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
enum slot_id slot = serdes_dev_slot[srds_cfg][device];
const char *name = slot_names[slot];
if (name)
return name;
else
return "Nothing";
}
#ifdef CONFIG_PCI
void pci_init_board(void)
{
fsl_pcie_init_board(0);
}
#endif
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
return 0;
}
/*
* Initialize on-board and/or PCI Ethernet devices
*
* Returns:
* <0, error
* 0, no ethernet devices found
* >0, number of ethernet devices initialized
*/
int board_eth_init(bd_t *bis)
{
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
unsigned int num = 0;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
num++;
#endif
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
}
#ifdef CONFIG_OF_BOARD_SETUP
/**
* ft_codec_setup - fix up the clock-frequency property of the codec node
*
* Update the clock-frequency property based on the value of the 'audclk'
* hwconfig option. If audclk is not specified, then don't write anything
* to the device tree, because it means that the codec clock is disabled.
*/
static void ft_codec_setup(void *blob, const char *compatible)
{
const char *audclk;
size_t arglen;
u32 freq;
audclk = hwconfig_arg("audclk", &arglen);
if (audclk) {
if (strncmp(audclk, "11", 2) == 0)
freq = 11289600;
else
freq = 12288000;
do_fixup_by_compat_u32(blob, compatible, "clock-frequency",
freq, 1);
}
}
void ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = getenv_bootm_low();
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
FT_FSL_PCI_SETUP;
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
/* Update the WM8776 node's clock frequency property */
ft_codec_setup(blob, "wlf,wm8776");
}
#endif