u-boot/drivers/usb/gadget/Makefile
Stefan Agner a3774c1c3c spl: add serial download protocol (SDP) support
Add USB serial download protocol support to SPL. If the SoC started
in recovery mode the SPL will immediately switch to SDP and wait for
further downloads/commands from the host side.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-08-23 10:41:58 +02:00

48 lines
1.5 KiB
Makefile

#
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += g_dnl.o
obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o
obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
endif
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
obj-$(CONFIG_CI_UDC) += ci_udc.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o
obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o
obj-$(CONFIG_USB_FUNCTION_FASTBOOT) += f_fastboot.o
obj-$(CONFIG_USB_FUNCTION_SDP) += f_sdp.o
endif
endif
ifdef CONFIG_USB_ETHER
obj-y += ether.o
obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
obj-$(CONFIG_CI_UDC) += ci_udc.o
obj-$(CONFIG_CPU_PXA25X) += pxa25x_udc.o
else
# Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE
ifdef CONFIG_USB_DEVICE
obj-y += core.o
obj-y += ep0.o
obj-$(CONFIG_DW_UDC) += designware_udc.o
obj-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o
endif
endif