Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-25 20:43:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/spi/tegra20_slink.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header 
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

380 lines
10 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* NVIDIA Tegra SPI-SLINK controller
*
* Copyright (c) 2010-2013 NVIDIA Corporation
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <time.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch-tegra/clk_rst.h>
#include <spi.h>
#include <fdtdec.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include "tegra_spi.h"
DECLARE_GLOBAL_DATA_PTR;
/* COMMAND */
#define SLINK_CMD_ENB BIT(31)
#define SLINK_CMD_GO BIT(30)
#define SLINK_CMD_M_S BIT(28)
#define SLINK_CMD_IDLE_SCLK_DRIVE_LOW (0 << 24)
#define SLINK_CMD_IDLE_SCLK_DRIVE_HIGH BIT(24)
#define SLINK_CMD_IDLE_SCLK_PULL_LOW (2 << 24)
#define SLINK_CMD_IDLE_SCLK_PULL_HIGH (3 << 24)
#define SLINK_CMD_IDLE_SCLK_MASK (3 << 24)
#define SLINK_CMD_CK_SDA BIT(21)
#define SLINK_CMD_CS_POL BIT(13)
#define SLINK_CMD_CS_VAL BIT(12)
#define SLINK_CMD_CS_SOFT BIT(11)
#define SLINK_CMD_BIT_LENGTH BIT(4)
#define SLINK_CMD_BIT_LENGTH_MASK GENMASK(4, 0)
/* COMMAND2 */
#define SLINK_CMD2_TXEN BIT(30)
#define SLINK_CMD2_RXEN BIT(31)
#define SLINK_CMD2_SS_EN BIT(18)
#define SLINK_CMD2_SS_EN_SHIFT 18
#define SLINK_CMD2_SS_EN_MASK GENMASK(19, 18)
#define SLINK_CMD2_CS_ACTIVE_BETWEEN BIT(17)
/* STATUS */
#define SLINK_STAT_BSY BIT(31)
#define SLINK_STAT_RDY BIT(30)
#define SLINK_STAT_ERR BIT(29)
#define SLINK_STAT_RXF_FLUSH BIT(27)
#define SLINK_STAT_TXF_FLUSH BIT(26)
#define SLINK_STAT_RXF_OVF BIT(25)
#define SLINK_STAT_TXF_UNR BIT(24)
#define SLINK_STAT_RXF_EMPTY BIT(23)
#define SLINK_STAT_RXF_FULL BIT(22)
#define SLINK_STAT_TXF_EMPTY BIT(21)
#define SLINK_STAT_TXF_FULL BIT(20)
#define SLINK_STAT_TXF_OVF BIT(19)
#define SLINK_STAT_RXF_UNR BIT(18)
#define SLINK_STAT_CUR_BLKCNT BIT(15)
/* STATUS2 */
#define SLINK_STAT2_RXF_FULL_CNT BIT(16)
#define SLINK_STAT2_TXF_FULL_CNT BIT(0)
#define SPI_TIMEOUT 1000
#define TEGRA_SPI_MAX_FREQ 52000000
struct spi_regs {
u32 command; /* SLINK_COMMAND_0 register */
u32 command2; /* SLINK_COMMAND2_0 reg */
u32 status; /* SLINK_STATUS_0 register */
u32 reserved; /* Reserved offset 0C */
u32 mas_data; /* SLINK_MAS_DATA_0 reg */
u32 slav_data; /* SLINK_SLAVE_DATA_0 reg */
u32 dma_ctl; /* SLINK_DMA_CTL_0 register */
u32 status2; /* SLINK_STATUS2_0 reg */
u32 rsvd[56]; /* 0x20 to 0xFF reserved */
u32 tx_fifo; /* SLINK_TX_FIFO_0 reg off 100h */
u32 rsvd2[31]; /* 0x104 to 0x17F reserved */
u32 rx_fifo; /* SLINK_RX_FIFO_0 reg off 180h */
};
struct tegra30_spi_priv {
struct spi_regs *regs;
unsigned int freq;
unsigned int mode;
int periph_id;
int valid;
int last_transaction_us;
};
struct tegra_spi_slave {
struct spi_slave slave;
struct tegra30_spi_priv *ctrl;
};
static int tegra30_spi_of_to_plat(struct udevice *bus)
{
struct tegra_spi_plat *plat = dev_get_plat(bus);
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
plat->base = dev_read_addr(bus);
plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
debug("%s: could not decode periph id %d\n", __func__,
plat->periph_id);
return -FDT_ERR_NOTFOUND;
}
/* Use 500KHz as a suitable default */
plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
500000);
plat->deactivate_delay_us = fdtdec_get_int(blob, node,
"spi-deactivate-delay", 0);
debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
__func__, plat->base, plat->periph_id, plat->frequency,
plat->deactivate_delay_us);
return 0;
}
static int tegra30_spi_probe(struct udevice *bus)
{
struct tegra_spi_plat *plat = dev_get_plat(bus);
struct tegra30_spi_priv *priv = dev_get_priv(bus);
priv->regs = (struct spi_regs *)plat->base;
priv->last_transaction_us = timer_get_us();
priv->freq = plat->frequency;
priv->periph_id = plat->periph_id;
/* Change SPI clock to correct frequency, PLLP_OUT0 source */
clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
priv->freq);
return 0;
}
static int tegra30_spi_claim_bus(struct udevice *dev)
{
struct udevice *bus = dev->parent;
struct tegra30_spi_priv *priv = dev_get_priv(bus);
struct spi_regs *regs = priv->regs;
u32 reg;
/* Change SPI clock to correct frequency, PLLP_OUT0 source */
clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
priv->freq);
/* Clear stale status here */
reg = SLINK_STAT_RDY | SLINK_STAT_RXF_FLUSH | SLINK_STAT_TXF_FLUSH | \
SLINK_STAT_RXF_UNR | SLINK_STAT_TXF_OVF;
writel(reg, &regs->status);
debug("%s: STATUS = %08x\n", __func__, readl(&regs->status));
/* Set master mode and sw controlled CS */
reg = readl(&regs->command);
reg |= SLINK_CMD_M_S | SLINK_CMD_CS_SOFT;
writel(reg, &regs->command);
debug("%s: COMMAND = %08x\n", __func__, readl(&regs->command));
return 0;
}
static void spi_cs_activate(struct udevice *dev)
{
struct udevice *bus = dev->parent;
struct tegra_spi_plat *pdata = dev_get_plat(bus);
struct tegra30_spi_priv *priv = dev_get_priv(bus);
/* If it's too soon to do another transaction, wait */
if (pdata->deactivate_delay_us &&
priv->last_transaction_us) {
ulong delay_us; /* The delay completed so far */
delay_us = timer_get_us() - priv->last_transaction_us;
if (delay_us < pdata->deactivate_delay_us)
udelay(pdata->deactivate_delay_us - delay_us);
}
/* CS is negated on Tegra, so drive a 1 to get a 0 */
setbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL);
}
static void spi_cs_deactivate(struct udevice *dev)
{
struct udevice *bus = dev->parent;
struct tegra_spi_plat *pdata = dev_get_plat(bus);
struct tegra30_spi_priv *priv = dev_get_priv(bus);
/* CS is negated on Tegra, so drive a 0 to get a 1 */
clrbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL);
/* Remember time of this transaction so we can honour the bus delay */
if (pdata->deactivate_delay_us)
priv->last_transaction_us = timer_get_us();
}
static int tegra30_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *data_out, void *data_in,
unsigned long flags)
{
struct udevice *bus = dev->parent;
struct tegra30_spi_priv *priv = dev_get_priv(bus);
struct spi_regs *regs = priv->regs;
u32 reg, tmpdout, tmpdin = 0;
const u8 *dout = data_out;
u8 *din = data_in;
int num_bytes;
int ret;
debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
__func__, dev_seq(bus), spi_chip_select(dev), dout, din, bitlen);
if (bitlen % 8)
return -1;
num_bytes = bitlen / 8;
ret = 0;
reg = readl(&regs->status);
writel(reg, &regs->status); /* Clear all SPI events via R/W */
debug("%s entry: STATUS = %08x\n", __func__, reg);
reg = readl(&regs->status2);
writel(reg, &regs->status2); /* Clear all STATUS2 events via R/W */
debug("%s entry: STATUS2 = %08x\n", __func__, reg);
debug("%s entry: COMMAND = %08x\n", __func__, readl(&regs->command));
clrsetbits_le32(&regs->command2, SLINK_CMD2_SS_EN_MASK,
SLINK_CMD2_TXEN | SLINK_CMD2_RXEN |
(spi_chip_select(dev) << SLINK_CMD2_SS_EN_SHIFT));
debug("%s entry: COMMAND2 = %08x\n", __func__, readl(&regs->command2));
if (flags & SPI_XFER_BEGIN)
spi_cs_activate(dev);
/* handle data in 32-bit chunks */
while (num_bytes > 0) {
int bytes;
int is_read = 0;
int tm, i;
tmpdout = 0;
bytes = (num_bytes > 4) ? 4 : num_bytes;
if (dout != NULL) {
for (i = 0; i < bytes; ++i)
tmpdout = (tmpdout << 8) | dout[i];
dout += bytes;
}
num_bytes -= bytes;
clrsetbits_le32(&regs->command, SLINK_CMD_BIT_LENGTH_MASK,
bytes * 8 - 1);
writel(tmpdout, &regs->tx_fifo);
setbits_le32(&regs->command, SLINK_CMD_GO);
/*
* Wait for SPI transmit FIFO to empty, or to time out.
* The RX FIFO status will be read and cleared last
*/
for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
u32 status;
status = readl(&regs->status);
/* We can exit when we've had both RX and TX activity */
if (is_read && (status & SLINK_STAT_TXF_EMPTY))
break;
if ((status & (SLINK_STAT_BSY | SLINK_STAT_RDY)) !=
SLINK_STAT_RDY)
tm++;
else if (!(status & SLINK_STAT_RXF_EMPTY)) {
tmpdin = readl(&regs->rx_fifo);
is_read = 1;
/* swap bytes read in */
if (din != NULL) {
for (i = bytes - 1; i >= 0; --i) {
din[i] = tmpdin & 0xff;
tmpdin >>= 8;
}
din += bytes;
}
}
}
if (tm >= SPI_TIMEOUT)
ret = tm;
/* clear ACK RDY, etc. bits */
writel(readl(&regs->status), &regs->status);
}
if (flags & SPI_XFER_END)
spi_cs_deactivate(dev);
debug("%s: transfer ended. Value=%08x, status = %08x\n",
__func__, tmpdin, readl(&regs->status));
if (ret) {
printf("%s: timeout during SPI transfer, tm %d\n",
__func__, ret);
return -1;
}
return 0;
}
static int tegra30_spi_set_speed(struct udevice *bus, uint speed)
{
struct tegra_spi_plat *plat = dev_get_plat(bus);
struct tegra30_spi_priv *priv = dev_get_priv(bus);
if (speed > plat->frequency)
speed = plat->frequency;
priv->freq = speed;
debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq);
return 0;
}
static int tegra30_spi_set_mode(struct udevice *bus, uint mode)
{
struct tegra30_spi_priv *priv = dev_get_priv(bus);
struct spi_regs *regs = priv->regs;
u32 reg;
reg = readl(&regs->command);
/* Set CPOL and CPHA */
reg &= ~(SLINK_CMD_IDLE_SCLK_MASK | SLINK_CMD_CK_SDA);
if (mode & SPI_CPHA)
reg |= SLINK_CMD_CK_SDA;
if (mode & SPI_CPOL)
reg |= SLINK_CMD_IDLE_SCLK_DRIVE_HIGH;
else
reg |= SLINK_CMD_IDLE_SCLK_DRIVE_LOW;
writel(reg, &regs->command);
priv->mode = mode;
debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
return 0;
}
static const struct dm_spi_ops tegra30_spi_ops = {
.claim_bus = tegra30_spi_claim_bus,
.xfer = tegra30_spi_xfer,
.set_speed = tegra30_spi_set_speed,
.set_mode = tegra30_spi_set_mode,
/*
* cs_info is not needed, since we require all chip selects to be
* in the device tree explicitly
*/
};
static const struct udevice_id tegra30_spi_ids[] = {
{ .compatible = "nvidia,tegra20-slink" },
{ }
};
U_BOOT_DRIVER(tegra30_spi) = {
.name = "tegra20_slink",
.id = UCLASS_SPI,
.of_match = tegra30_spi_ids,
.ops = &tegra30_spi_ops,
.of_to_plat = tegra30_spi_of_to_plat,
.plat_auto = sizeof(struct tegra_spi_plat),
.priv_auto = sizeof(struct tegra30_spi_priv),
.probe = tegra30_spi_probe,
};
Reference in a new issue View git blame Copy permalink