mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
66356b4c06
Signed-off-by: Wolfgang Denk <wd@denx.de>
855 lines
23 KiB
C
855 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <init.h>
|
|
#include <ram.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/cru_rk322x.h>
|
|
#include <asm/arch-rockchip/grf_rk322x.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/sdram_rk322x.h>
|
|
#include <asm/arch-rockchip/uart.h>
|
|
#include <asm/arch-rockchip/sdram.h>
|
|
#include <asm/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
struct chan_info {
|
|
struct rk322x_ddr_pctl *pctl;
|
|
struct rk322x_ddr_phy *phy;
|
|
struct rk322x_service_sys *msch;
|
|
};
|
|
|
|
struct dram_info {
|
|
struct chan_info chan[1];
|
|
struct ram_info info;
|
|
struct clk ddr_clk;
|
|
struct rk322x_cru *cru;
|
|
struct rk322x_grf *grf;
|
|
};
|
|
|
|
struct rk322x_sdram_params {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_rockchip_rk3228_dmc of_plat;
|
|
#endif
|
|
struct rk322x_sdram_channel ch[1];
|
|
struct rk322x_pctl_timing pctl_timing;
|
|
struct rk322x_phy_timing phy_timing;
|
|
struct rk322x_base_params base;
|
|
int num_channels;
|
|
struct regmap *map;
|
|
};
|
|
|
|
#ifdef CONFIG_TPL_BUILD
|
|
/*
|
|
* [7:6] bank(n:n bit bank)
|
|
* [5:4] row(13+n)
|
|
* [3] cs(0:1 cs, 1:2 cs)
|
|
* [2:1] bank(n:n bit bank)
|
|
* [0] col(10+n)
|
|
*/
|
|
const char ddr_cfg_2_rbc[] = {
|
|
((0 << 6) | (0 << 4) | (0 << 3) | (1 << 2) | 1),
|
|
((0 << 6) | (1 << 4) | (0 << 3) | (1 << 2) | 1),
|
|
((0 << 6) | (2 << 4) | (0 << 3) | (1 << 2) | 1),
|
|
((0 << 6) | (3 << 4) | (0 << 3) | (1 << 2) | 1),
|
|
((0 << 6) | (1 << 4) | (0 << 3) | (1 << 2) | 2),
|
|
((0 << 6) | (2 << 4) | (0 << 3) | (1 << 2) | 2),
|
|
((0 << 6) | (3 << 4) | (0 << 3) | (1 << 2) | 2),
|
|
((0 << 6) | (0 << 4) | (0 << 3) | (1 << 2) | 0),
|
|
((0 << 6) | (1 << 4) | (0 << 3) | (1 << 2) | 0),
|
|
((0 << 6) | (2 << 4) | (0 << 3) | (1 << 2) | 0),
|
|
((0 << 6) | (3 << 4) | (0 << 3) | (1 << 2) | 0),
|
|
((0 << 6) | (2 << 4) | (0 << 3) | (0 << 2) | 1),
|
|
((1 << 6) | (1 << 4) | (0 << 3) | (0 << 2) | 2),
|
|
((1 << 6) | (1 << 4) | (0 << 3) | (0 << 2) | 1),
|
|
((0 << 6) | (3 << 4) | (1 << 3) | (1 << 2) | 1),
|
|
((0 << 6) | (3 << 4) | (1 << 3) | (1 << 2) | 0),
|
|
};
|
|
|
|
static void copy_to_reg(u32 *dest, const u32 *src, u32 n)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < n / sizeof(u32); i++) {
|
|
writel(*src, dest);
|
|
src++;
|
|
dest++;
|
|
}
|
|
}
|
|
|
|
void phy_pctrl_reset(struct rk322x_cru *cru,
|
|
struct rk322x_ddr_phy *ddr_phy)
|
|
{
|
|
rk_clrsetreg(&cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT |
|
|
1 << DDRCTRL_SRST_SHIFT | 1 << DDRPHY_PSRST_SHIFT |
|
|
1 << DDRPHY_SRST_SHIFT,
|
|
1 << DDRCTRL_PSRST_SHIFT | 1 << DDRCTRL_SRST_SHIFT |
|
|
1 << DDRPHY_PSRST_SHIFT | 1 << DDRPHY_SRST_SHIFT);
|
|
|
|
udelay(10);
|
|
|
|
rk_clrreg(&cru->cru_softrst_con[5], 1 << DDRPHY_PSRST_SHIFT |
|
|
1 << DDRPHY_SRST_SHIFT);
|
|
udelay(10);
|
|
|
|
rk_clrreg(&cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT |
|
|
1 << DDRCTRL_SRST_SHIFT);
|
|
udelay(10);
|
|
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0],
|
|
SOFT_RESET_MASK << SOFT_RESET_SHIFT);
|
|
udelay(10);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0],
|
|
SOFT_DERESET_ANALOG);
|
|
udelay(5);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0],
|
|
SOFT_DERESET_DIGITAL);
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
void phy_dll_bypass_set(struct rk322x_ddr_phy *ddr_phy, u32 freq)
|
|
{
|
|
u32 tmp;
|
|
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0x13], 0x10);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0x26], 0x10);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0x36], 0x10);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0x46], 0x10);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0x56], 0x10);
|
|
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0x14], 0x8);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0x27], 0x8);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0x37], 0x8);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0x47], 0x8);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0x57], 0x8);
|
|
|
|
if (freq <= 400)
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0xa4], 0x1f);
|
|
else
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0xa4], 0x1f);
|
|
|
|
if (freq <= 680)
|
|
tmp = 3;
|
|
else
|
|
tmp = 2;
|
|
|
|
writel(tmp, &ddr_phy->ddrphy_reg[0x28]);
|
|
writel(tmp, &ddr_phy->ddrphy_reg[0x38]);
|
|
writel(tmp, &ddr_phy->ddrphy_reg[0x48]);
|
|
writel(tmp, &ddr_phy->ddrphy_reg[0x58]);
|
|
}
|
|
|
|
static void send_command(struct rk322x_ddr_pctl *pctl,
|
|
u32 rank, u32 cmd, u32 arg)
|
|
{
|
|
writel((START_CMD | (rank << 20) | arg | cmd), &pctl->mcmd);
|
|
udelay(1);
|
|
while (readl(&pctl->mcmd) & START_CMD)
|
|
;
|
|
}
|
|
|
|
static void memory_init(struct chan_info *chan,
|
|
struct rk322x_sdram_params *sdram_params)
|
|
{
|
|
struct rk322x_ddr_pctl *pctl = chan->pctl;
|
|
u32 dramtype = sdram_params->base.dramtype;
|
|
|
|
if (dramtype == DDR3) {
|
|
send_command(pctl, 3, DESELECT_CMD, 0);
|
|
udelay(1);
|
|
send_command(pctl, 3, PREA_CMD, 0);
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(0x02 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
|
|
(sdram_params->phy_timing.mr[2] & CMD_ADDR_MASK) <<
|
|
CMD_ADDR_SHIFT);
|
|
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(0x03 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
|
|
(sdram_params->phy_timing.mr[3] & CMD_ADDR_MASK) <<
|
|
CMD_ADDR_SHIFT);
|
|
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(0x01 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
|
|
(sdram_params->phy_timing.mr[1] & CMD_ADDR_MASK) <<
|
|
CMD_ADDR_SHIFT);
|
|
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(0x00 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
|
|
((sdram_params->phy_timing.mr[0] |
|
|
DDR3_DLL_RESET) &
|
|
CMD_ADDR_MASK) << CMD_ADDR_SHIFT);
|
|
|
|
send_command(pctl, 3, ZQCL_CMD, 0);
|
|
} else {
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(0x63 & LPDDR23_MA_MASK) << LPDDR23_MA_SHIFT |
|
|
(0 & LPDDR23_OP_MASK) <<
|
|
LPDDR23_OP_SHIFT);
|
|
udelay(10);
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(0x10 & LPDDR23_MA_MASK) << LPDDR23_MA_SHIFT |
|
|
(0xff & LPDDR23_OP_MASK) <<
|
|
LPDDR23_OP_SHIFT);
|
|
udelay(1);
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(0x10 & LPDDR23_MA_MASK) << LPDDR23_MA_SHIFT |
|
|
(0xff & LPDDR23_OP_MASK) <<
|
|
LPDDR23_OP_SHIFT);
|
|
udelay(1);
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(1 & LPDDR23_MA_MASK) << LPDDR23_MA_SHIFT |
|
|
(sdram_params->phy_timing.mr[1] &
|
|
LPDDR23_OP_MASK) << LPDDR23_OP_SHIFT);
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(2 & LPDDR23_MA_MASK) << LPDDR23_MA_SHIFT |
|
|
(sdram_params->phy_timing.mr[2] &
|
|
LPDDR23_OP_MASK) << LPDDR23_OP_SHIFT);
|
|
send_command(pctl, 3, MRS_CMD,
|
|
(3 & LPDDR23_MA_MASK) << LPDDR23_MA_SHIFT |
|
|
(sdram_params->phy_timing.mr[3] &
|
|
LPDDR23_OP_MASK) << LPDDR23_OP_SHIFT);
|
|
if (dramtype == LPDDR3)
|
|
send_command(pctl, 3, MRS_CMD, (11 & LPDDR23_MA_MASK) <<
|
|
LPDDR23_MA_SHIFT |
|
|
(sdram_params->phy_timing.mr11 &
|
|
LPDDR23_OP_MASK) << LPDDR23_OP_SHIFT);
|
|
}
|
|
}
|
|
|
|
static u32 data_training(struct chan_info *chan)
|
|
{
|
|
struct rk322x_ddr_phy *ddr_phy = chan->phy;
|
|
struct rk322x_ddr_pctl *pctl = chan->pctl;
|
|
u32 value;
|
|
u32 bw = (readl(&ddr_phy->ddrphy_reg[0]) >> 4) & 0xf;
|
|
u32 ret;
|
|
|
|
/* disable auto refresh */
|
|
value = readl(&pctl->trefi) | (1 << 31);
|
|
writel(1 << 31, &pctl->trefi);
|
|
|
|
clrsetbits_le32(&ddr_phy->ddrphy_reg[2], 0x30,
|
|
DQS_SQU_CAL_SEL_CS0);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[2], DQS_SQU_CAL_START);
|
|
|
|
udelay(30);
|
|
ret = readl(&ddr_phy->ddrphy_reg[0xff]);
|
|
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[2],
|
|
DQS_SQU_CAL_START);
|
|
|
|
/*
|
|
* since data training will take about 20us, so send some auto
|
|
* refresh(about 7.8us) to complement the lost time
|
|
*/
|
|
send_command(pctl, 3, PREA_CMD, 0);
|
|
send_command(pctl, 3, REF_CMD, 0);
|
|
|
|
writel(value, &pctl->trefi);
|
|
|
|
if (ret & 0x10) {
|
|
ret = -1;
|
|
} else {
|
|
ret = (ret & 0xf) ^ bw;
|
|
ret = (ret == 0) ? 0 : -1;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void move_to_config_state(struct rk322x_ddr_pctl *pctl)
|
|
{
|
|
unsigned int state;
|
|
|
|
while (1) {
|
|
state = readl(&pctl->stat) & PCTL_STAT_MASK;
|
|
switch (state) {
|
|
case LOW_POWER:
|
|
writel(WAKEUP_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK)
|
|
!= ACCESS)
|
|
;
|
|
/*
|
|
* If at low power state, need wakeup first, and then
|
|
* enter the config, so fallthrough
|
|
*/
|
|
case ACCESS:
|
|
/* fallthrough */
|
|
case INIT_MEM:
|
|
writel(CFG_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG)
|
|
;
|
|
break;
|
|
case CONFIG:
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void move_to_access_state(struct rk322x_ddr_pctl *pctl)
|
|
{
|
|
unsigned int state;
|
|
|
|
while (1) {
|
|
state = readl(&pctl->stat) & PCTL_STAT_MASK;
|
|
switch (state) {
|
|
case LOW_POWER:
|
|
writel(WAKEUP_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS)
|
|
;
|
|
break;
|
|
case INIT_MEM:
|
|
writel(CFG_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG)
|
|
;
|
|
/* fallthrough */
|
|
case CONFIG:
|
|
writel(GO_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS)
|
|
;
|
|
break;
|
|
case ACCESS:
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void move_to_lowpower_state(struct rk322x_ddr_pctl *pctl)
|
|
{
|
|
unsigned int state;
|
|
|
|
while (1) {
|
|
state = readl(&pctl->stat) & PCTL_STAT_MASK;
|
|
switch (state) {
|
|
case INIT_MEM:
|
|
writel(CFG_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG)
|
|
;
|
|
/* fallthrough */
|
|
case CONFIG:
|
|
writel(GO_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS)
|
|
;
|
|
break;
|
|
case ACCESS:
|
|
writel(SLEEP_STATE, &pctl->sctl);
|
|
while ((readl(&pctl->stat) & PCTL_STAT_MASK) !=
|
|
LOW_POWER)
|
|
;
|
|
break;
|
|
case LOW_POWER:
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* pctl should in low power mode when call this function */
|
|
static void phy_softreset(struct dram_info *dram)
|
|
{
|
|
struct rk322x_ddr_phy *ddr_phy = dram->chan[0].phy;
|
|
struct rk322x_grf *grf = dram->grf;
|
|
|
|
writel(GRF_DDRPHY_BUFFEREN_CORE_EN, &grf->soc_con[0]);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0], 0x3 << 2);
|
|
udelay(1);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0], 1 << 2);
|
|
udelay(5);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0], 1 << 3);
|
|
writel(GRF_DDRPHY_BUFFEREN_CORE_DIS, &grf->soc_con[0]);
|
|
}
|
|
|
|
/* bw: 2: 32bit, 1:16bit */
|
|
static void set_bw(struct dram_info *dram, u32 bw)
|
|
{
|
|
struct rk322x_ddr_pctl *pctl = dram->chan[0].pctl;
|
|
struct rk322x_ddr_phy *ddr_phy = dram->chan[0].phy;
|
|
struct rk322x_grf *grf = dram->grf;
|
|
|
|
if (bw == 1) {
|
|
setbits_le32(&pctl->ppcfg, 1);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0], 0xc << 4);
|
|
writel(GRF_MSCH_NOC_16BIT_EN, &grf->soc_con[0]);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0x46], 0x8);
|
|
clrbits_le32(&ddr_phy->ddrphy_reg[0x56], 0x8);
|
|
} else {
|
|
clrbits_le32(&pctl->ppcfg, 1);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0], 0xf << 4);
|
|
writel(GRF_DDR_32BIT_EN | GRF_MSCH_NOC_32BIT_EN,
|
|
&grf->soc_con[0]);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0x46], 0x8);
|
|
setbits_le32(&ddr_phy->ddrphy_reg[0x56], 0x8);
|
|
}
|
|
}
|
|
|
|
static void pctl_cfg(struct rk322x_ddr_pctl *pctl,
|
|
struct rk322x_sdram_params *sdram_params,
|
|
struct rk322x_grf *grf)
|
|
{
|
|
u32 burst_len;
|
|
u32 bw;
|
|
u32 dramtype = sdram_params->base.dramtype;
|
|
|
|
if (sdram_params->ch[0].bw == 2)
|
|
bw = GRF_DDR_32BIT_EN | GRF_MSCH_NOC_32BIT_EN;
|
|
else
|
|
bw = GRF_MSCH_NOC_16BIT_EN;
|
|
|
|
writel(DFI_INIT_START | DFI_DATA_BYTE_DISABLE_EN, &pctl->dfistcfg0);
|
|
writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN, &pctl->dfistcfg1);
|
|
writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2);
|
|
writel(0x51010, &pctl->dfilpcfg0);
|
|
|
|
writel(1, &pctl->dfitphyupdtype0);
|
|
writel(0x0d, &pctl->dfitphyrdlat);
|
|
writel(0, &pctl->dfitphywrdata);
|
|
|
|
writel(0, &pctl->dfiupdcfg);
|
|
copy_to_reg(&pctl->togcnt1u, &sdram_params->pctl_timing.togcnt1u,
|
|
sizeof(struct rk322x_pctl_timing));
|
|
if (dramtype == DDR3) {
|
|
writel((1 << 3) | (1 << 11),
|
|
&pctl->dfiodtcfg);
|
|
writel(7 << 16, &pctl->dfiodtcfg1);
|
|
writel((readl(&pctl->tcl) - 1) / 2 - 1, &pctl->dfitrddataen);
|
|
writel((readl(&pctl->tcwl) - 1) / 2 - 1, &pctl->dfitphywrlat);
|
|
writel(500, &pctl->trsth);
|
|
writel(0 << MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT | DDR3_EN |
|
|
DDR2_DDR3_BL_8 | (6 - 4) << TFAW_SHIFT | PD_EXIT_SLOW |
|
|
1 << PD_TYPE_SHIFT | 0 << PD_IDLE_SHIFT,
|
|
&pctl->mcfg);
|
|
writel(bw | GRF_DDR3_EN, &grf->soc_con[0]);
|
|
} else {
|
|
if (sdram_params->phy_timing.bl & PHT_BL_8)
|
|
burst_len = MDDR_LPDDR2_BL_8;
|
|
else
|
|
burst_len = MDDR_LPDDR2_BL_4;
|
|
|
|
writel(readl(&pctl->tcl) / 2 - 1, &pctl->dfitrddataen);
|
|
writel(readl(&pctl->tcwl) / 2 - 1, &pctl->dfitphywrlat);
|
|
writel(0, &pctl->trsth);
|
|
if (dramtype == LPDDR2) {
|
|
writel(0 << MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT |
|
|
LPDDR2_S4 | LPDDR2_EN | burst_len |
|
|
(6 - 4) << TFAW_SHIFT | PD_EXIT_FAST |
|
|
1 << PD_TYPE_SHIFT | 0 << PD_IDLE_SHIFT,
|
|
&pctl->mcfg);
|
|
writel(0, &pctl->dfiodtcfg);
|
|
writel(0, &pctl->dfiodtcfg1);
|
|
} else {
|
|
writel(0 << MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT |
|
|
LPDDR2_S4 | LPDDR3_EN | burst_len |
|
|
(6 - 4) << TFAW_SHIFT | PD_EXIT_FAST |
|
|
1 << PD_TYPE_SHIFT | 0 << PD_IDLE_SHIFT,
|
|
&pctl->mcfg);
|
|
writel((1 << 3) | (1 << 2), &pctl->dfiodtcfg);
|
|
writel((7 << 16) | 4, &pctl->dfiodtcfg1);
|
|
}
|
|
writel(bw | GRF_LPDDR2_3_EN, &grf->soc_con[0]);
|
|
}
|
|
setbits_le32(&pctl->scfg, 1);
|
|
}
|
|
|
|
static void phy_cfg(struct chan_info *chan,
|
|
struct rk322x_sdram_params *sdram_params)
|
|
{
|
|
struct rk322x_ddr_phy *ddr_phy = chan->phy;
|
|
struct rk322x_service_sys *axi_bus = chan->msch;
|
|
struct rk322x_msch_timings *noc_timing = &sdram_params->base.noc_timing;
|
|
struct rk322x_phy_timing *phy_timing = &sdram_params->phy_timing;
|
|
struct rk322x_pctl_timing *pctl_timing = &sdram_params->pctl_timing;
|
|
u32 cmd_drv, clk_drv, dqs_drv, dqs_odt;
|
|
|
|
writel(noc_timing->ddrtiming, &axi_bus->ddrtiming);
|
|
writel(noc_timing->ddrmode, &axi_bus->ddrmode);
|
|
writel(noc_timing->readlatency, &axi_bus->readlatency);
|
|
writel(noc_timing->activate, &axi_bus->activate);
|
|
writel(noc_timing->devtodev, &axi_bus->devtodev);
|
|
|
|
switch (sdram_params->base.dramtype) {
|
|
case DDR3:
|
|
writel(PHY_DDR3 | phy_timing->bl, &ddr_phy->ddrphy_reg[1]);
|
|
break;
|
|
case LPDDR2:
|
|
writel(PHY_LPDDR2 | phy_timing->bl, &ddr_phy->ddrphy_reg[1]);
|
|
break;
|
|
default:
|
|
writel(PHY_LPDDR2 | phy_timing->bl, &ddr_phy->ddrphy_reg[1]);
|
|
break;
|
|
}
|
|
|
|
writel(phy_timing->cl_al, &ddr_phy->ddrphy_reg[0xb]);
|
|
writel(pctl_timing->tcwl, &ddr_phy->ddrphy_reg[0xc]);
|
|
|
|
cmd_drv = PHY_RON_RTT_34OHM;
|
|
clk_drv = PHY_RON_RTT_45OHM;
|
|
dqs_drv = PHY_RON_RTT_34OHM;
|
|
if (sdram_params->base.dramtype == LPDDR2)
|
|
dqs_odt = PHY_RON_RTT_DISABLE;
|
|
else
|
|
dqs_odt = PHY_RON_RTT_225OHM;
|
|
|
|
writel(cmd_drv, &ddr_phy->ddrphy_reg[0x11]);
|
|
clrsetbits_le32(&ddr_phy->ddrphy_reg[0x12], (0x1f << 3), cmd_drv << 3);
|
|
writel(clk_drv, &ddr_phy->ddrphy_reg[0x16]);
|
|
writel(clk_drv, &ddr_phy->ddrphy_reg[0x18]);
|
|
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x20]);
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x2f]);
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x30]);
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x3f]);
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x40]);
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x4f]);
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x50]);
|
|
writel(dqs_drv, &ddr_phy->ddrphy_reg[0x5f]);
|
|
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x21]);
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x2e]);
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x31]);
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x3e]);
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x41]);
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x4e]);
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x51]);
|
|
writel(dqs_odt, &ddr_phy->ddrphy_reg[0x5e]);
|
|
}
|
|
|
|
void dram_cfg_rbc(struct chan_info *chan,
|
|
struct rk322x_sdram_params *sdram_params)
|
|
{
|
|
char noc_config;
|
|
int i = 0;
|
|
struct rk322x_sdram_channel *config = &sdram_params->ch[0];
|
|
struct rk322x_service_sys *axi_bus = chan->msch;
|
|
|
|
move_to_config_state(chan->pctl);
|
|
|
|
if ((config->rank == 2) && (config->cs1_row == config->cs0_row)) {
|
|
if ((config->col + config->bw) == 12) {
|
|
i = 14;
|
|
goto finish;
|
|
} else if ((config->col + config->bw) == 11) {
|
|
i = 15;
|
|
goto finish;
|
|
}
|
|
}
|
|
noc_config = ((config->cs0_row - 13) << 4) | ((config->bk - 2) << 2) |
|
|
(config->col + config->bw - 11);
|
|
for (i = 0; i < 11; i++) {
|
|
if (noc_config == ddr_cfg_2_rbc[i])
|
|
break;
|
|
}
|
|
|
|
if (i < 11)
|
|
goto finish;
|
|
|
|
noc_config = ((config->bk - 2) << 6) | ((config->cs0_row - 13) << 4) |
|
|
(config->col + config->bw - 11);
|
|
|
|
for (i = 11; i < 14; i++) {
|
|
if (noc_config == ddr_cfg_2_rbc[i])
|
|
break;
|
|
}
|
|
if (i < 14)
|
|
goto finish;
|
|
else
|
|
i = 0;
|
|
|
|
finish:
|
|
writel(i, &axi_bus->ddrconf);
|
|
move_to_access_state(chan->pctl);
|
|
}
|
|
|
|
static void dram_all_config(const struct dram_info *dram,
|
|
struct rk322x_sdram_params *sdram_params)
|
|
{
|
|
struct rk322x_sdram_channel *info = &sdram_params->ch[0];
|
|
u32 sys_reg = 0;
|
|
|
|
sys_reg |= sdram_params->base.dramtype << SYS_REG_DDRTYPE_SHIFT;
|
|
sys_reg |= (1 - 1) << SYS_REG_NUM_CH_SHIFT;
|
|
sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(0);
|
|
sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(0);
|
|
sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(0);
|
|
sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(0);
|
|
sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(0);
|
|
sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(0);
|
|
sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(0);
|
|
sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(0);
|
|
sys_reg |= (2 >> info->dbw) << SYS_REG_DBW_SHIFT(0);
|
|
|
|
writel(sys_reg, &dram->grf->os_reg[2]);
|
|
}
|
|
|
|
#define TEST_PATTEN 0x5aa5f00f
|
|
|
|
static int dram_cap_detect(struct dram_info *dram,
|
|
struct rk322x_sdram_params *sdram_params)
|
|
{
|
|
u32 bw, row, col, addr;
|
|
u32 ret = 0;
|
|
struct rk322x_service_sys *axi_bus = dram->chan[0].msch;
|
|
|
|
if (sdram_params->base.dramtype == DDR3)
|
|
sdram_params->ch[0].dbw = 1;
|
|
else
|
|
sdram_params->ch[0].dbw = 2;
|
|
|
|
move_to_config_state(dram->chan[0].pctl);
|
|
/* bw detect */
|
|
set_bw(dram, 2);
|
|
if (data_training(&dram->chan[0]) == 0) {
|
|
bw = 2;
|
|
} else {
|
|
bw = 1;
|
|
set_bw(dram, 1);
|
|
move_to_lowpower_state(dram->chan[0].pctl);
|
|
phy_softreset(dram);
|
|
move_to_config_state(dram->chan[0].pctl);
|
|
if (data_training(&dram->chan[0])) {
|
|
printf("BW detect error\n");
|
|
ret = -EINVAL;
|
|
}
|
|
}
|
|
sdram_params->ch[0].bw = bw;
|
|
sdram_params->ch[0].bk = 3;
|
|
|
|
if (bw == 2)
|
|
writel(6, &axi_bus->ddrconf);
|
|
else
|
|
writel(3, &axi_bus->ddrconf);
|
|
move_to_access_state(dram->chan[0].pctl);
|
|
for (col = 11; col >= 9; col--) {
|
|
writel(0, CONFIG_SYS_SDRAM_BASE);
|
|
addr = CONFIG_SYS_SDRAM_BASE +
|
|
(1 << (col + bw - 1));
|
|
writel(TEST_PATTEN, addr);
|
|
if ((readl(addr) == TEST_PATTEN) &&
|
|
(readl(CONFIG_SYS_SDRAM_BASE) == 0))
|
|
break;
|
|
}
|
|
if (col == 8) {
|
|
printf("Col detect error\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
} else {
|
|
sdram_params->ch[0].col = col;
|
|
}
|
|
|
|
writel(10, &axi_bus->ddrconf);
|
|
|
|
/* Detect row*/
|
|
for (row = 16; row >= 12; row--) {
|
|
writel(0, CONFIG_SYS_SDRAM_BASE);
|
|
addr = CONFIG_SYS_SDRAM_BASE + (1u << (row + 11 + 3 - 1));
|
|
writel(TEST_PATTEN, addr);
|
|
if ((readl(addr) == TEST_PATTEN) &&
|
|
(readl(CONFIG_SYS_SDRAM_BASE) == 0))
|
|
break;
|
|
}
|
|
if (row == 11) {
|
|
printf("Row detect error\n");
|
|
ret = -EINVAL;
|
|
} else {
|
|
sdram_params->ch[0].cs1_row = row;
|
|
sdram_params->ch[0].row_3_4 = 0;
|
|
sdram_params->ch[0].cs0_row = row;
|
|
}
|
|
/* cs detect */
|
|
writel(0, CONFIG_SYS_SDRAM_BASE);
|
|
writel(TEST_PATTEN, CONFIG_SYS_SDRAM_BASE + (1u << 30));
|
|
writel(~TEST_PATTEN, CONFIG_SYS_SDRAM_BASE + (1u << 30) + 4);
|
|
if ((readl(CONFIG_SYS_SDRAM_BASE + (1u << 30)) == TEST_PATTEN) &&
|
|
(readl(CONFIG_SYS_SDRAM_BASE) == 0))
|
|
sdram_params->ch[0].rank = 2;
|
|
else
|
|
sdram_params->ch[0].rank = 1;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int sdram_init(struct dram_info *dram,
|
|
struct rk322x_sdram_params *sdram_params)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_set_rate(&dram->ddr_clk,
|
|
sdram_params->base.ddr_freq * MHz * 2);
|
|
if (ret < 0) {
|
|
printf("Could not set DDR clock\n");
|
|
return ret;
|
|
}
|
|
|
|
phy_pctrl_reset(dram->cru, dram->chan[0].phy);
|
|
phy_dll_bypass_set(dram->chan[0].phy, sdram_params->base.ddr_freq);
|
|
pctl_cfg(dram->chan[0].pctl, sdram_params, dram->grf);
|
|
phy_cfg(&dram->chan[0], sdram_params);
|
|
writel(POWER_UP_START, &dram->chan[0].pctl->powctl);
|
|
while (!(readl(&dram->chan[0].pctl->powstat) & POWER_UP_DONE))
|
|
;
|
|
memory_init(&dram->chan[0], sdram_params);
|
|
move_to_access_state(dram->chan[0].pctl);
|
|
ret = dram_cap_detect(dram, sdram_params);
|
|
if (ret)
|
|
goto out;
|
|
dram_cfg_rbc(&dram->chan[0], sdram_params);
|
|
dram_all_config(dram, sdram_params);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int rk322x_dmc_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct rk322x_sdram_params *params = dev_get_plat(dev);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
int ret;
|
|
|
|
if (!CONFIG_IS_ENABLED(OF_REAL))
|
|
return 0;
|
|
|
|
params->num_channels = 1;
|
|
|
|
ret = fdtdec_get_int_array(blob, node, "rockchip,pctl-timing",
|
|
(u32 *)¶ms->pctl_timing,
|
|
sizeof(params->pctl_timing) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read rockchip,pctl-timing\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
ret = fdtdec_get_int_array(blob, node, "rockchip,phy-timing",
|
|
(u32 *)¶ms->phy_timing,
|
|
sizeof(params->phy_timing) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read rockchip,phy-timing\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
ret = fdtdec_get_int_array(blob, node, "rockchip,sdram-params",
|
|
(u32 *)¶ms->base,
|
|
sizeof(params->base) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read rockchip,sdram-params\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
ret = regmap_init_mem(dev_ofnode(dev), ¶ms->map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_TPL_BUILD */
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int conv_of_plat(struct udevice *dev)
|
|
{
|
|
struct rk322x_sdram_params *plat = dev_get_plat(dev);
|
|
struct dtd_rockchip_rk322x_dmc *of_plat = &plat->of_plat;
|
|
int ret;
|
|
|
|
memcpy(&plat->pctl_timing, of_plat->rockchip_pctl_timing,
|
|
sizeof(plat->pctl_timing));
|
|
memcpy(&plat->phy_timing, of_plat->rockchip_phy_timing,
|
|
sizeof(plat->phy_timing));
|
|
memcpy(&plat->base, of_plat->rockchip_sdram_params, sizeof(plat->base));
|
|
|
|
plat->num_channels = 1;
|
|
ret = regmap_init_mem_plat(dev, of_plat->reg,
|
|
ARRAY_SIZE(of_plat->reg) / 2, &plat->map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int rk322x_dmc_probe(struct udevice *dev)
|
|
{
|
|
#ifdef CONFIG_TPL_BUILD
|
|
struct rk322x_sdram_params *plat = dev_get_plat(dev);
|
|
int ret;
|
|
struct udevice *dev_clk;
|
|
#endif
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
ret = conv_of_plat(dev);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
priv->chan[0].msch = syscon_get_first_range(ROCKCHIP_SYSCON_MSCH);
|
|
priv->chan[0].pctl = regmap_get_range(plat->map, 0);
|
|
priv->chan[0].phy = regmap_get_range(plat->map, 1);
|
|
ret = rockchip_get_clk(&dev_clk);
|
|
if (ret)
|
|
return ret;
|
|
priv->ddr_clk.id = CLK_DDR;
|
|
ret = clk_request(dev_clk, &priv->ddr_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->cru = rockchip_get_cru();
|
|
if (IS_ERR(priv->cru))
|
|
return PTR_ERR(priv->cru);
|
|
ret = sdram_init(priv, plat);
|
|
if (ret)
|
|
return ret;
|
|
#else
|
|
priv->info.base = CONFIG_SYS_SDRAM_BASE;
|
|
priv->info.size = rockchip_sdram_size(
|
|
(phys_addr_t)&priv->grf->os_reg[2]);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk322x_dmc_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops rk322x_dmc_ops = {
|
|
.get_info = rk322x_dmc_get_info,
|
|
};
|
|
|
|
static const struct udevice_id rk322x_dmc_ids[] = {
|
|
{ .compatible = "rockchip,rk3228-dmc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dmc_rk322x) = {
|
|
.name = "rockchip_rk322x_dmc",
|
|
.id = UCLASS_RAM,
|
|
.of_match = rk322x_dmc_ids,
|
|
.ops = &rk322x_dmc_ops,
|
|
#ifdef CONFIG_TPL_BUILD
|
|
.of_to_plat = rk322x_dmc_of_to_plat,
|
|
#endif
|
|
.probe = rk322x_dmc_probe,
|
|
.priv_auto = sizeof(struct dram_info),
|
|
#ifdef CONFIG_TPL_BUILD
|
|
.plat_auto = sizeof(struct rk322x_sdram_params),
|
|
#endif
|
|
};
|