mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
317 lines
7.4 KiB
ArmAsm
317 lines
7.4 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2011 Andes Technology Corporation
|
|
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
|
|
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
|
*/
|
|
|
|
.pic
|
|
|
|
.text
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
|
|
#include <asm/macro.h>
|
|
#include <generated/asm-offsets.h>
|
|
|
|
/*
|
|
* parameters for the SDRAM controller
|
|
*/
|
|
#define SDMC_TP1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP1)
|
|
#define SDMC_TP2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP2)
|
|
#define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1)
|
|
#define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2)
|
|
#define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR)
|
|
#define SDMC_B1_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK1_BSR)
|
|
|
|
#define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1
|
|
#define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2
|
|
#define SDMC_CR1_D CONFIG_SYS_FTSDMC021_CR1
|
|
#define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2
|
|
|
|
#define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR
|
|
#define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR
|
|
|
|
|
|
/*
|
|
* for Orca and Emerald
|
|
*/
|
|
#define BOARD_ID_REG 0x104
|
|
#define BOARD_ID_FAMILY_MASK 0xfff000
|
|
#define BOARD_ID_FAMILY_V5 0x556000
|
|
#define BOARD_ID_FAMILY_K7 0x74b000
|
|
|
|
/*
|
|
* parameters for the static memory controller
|
|
*/
|
|
#define SMC_BANK0_CR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_CR)
|
|
#define SMC_BANK0_TPR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_TPR)
|
|
|
|
#define SMC_BANK0_CR_D FTSMC020_BANK0_LOWLV_CONFIG
|
|
#define SMC_BANK0_TPR_D FTSMC020_BANK0_LOWLV_TIMING
|
|
|
|
/*
|
|
* parameters for the ahbc controller
|
|
*/
|
|
#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
|
|
#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
|
|
|
|
/*
|
|
* for Orca and Emerald
|
|
*/
|
|
#define AHBC_BSR4_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_4)
|
|
#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
|
|
|
|
/*
|
|
* parameters for the pmu controoler
|
|
*/
|
|
#define PMU_PDLLCR0_A (CONFIG_FTPMU010_BASE + FTPMU010_PDLLCR0)
|
|
|
|
/*
|
|
* numeric 7 segment display
|
|
*/
|
|
.macro led, num
|
|
write32 CONFIG_DEBUG_LED, \num
|
|
.endm
|
|
|
|
/*
|
|
* Waiting for SDRAM to set up
|
|
*/
|
|
.macro wait_sdram
|
|
li $r0, CONFIG_FTSDMC021_BASE
|
|
1:
|
|
lwi $r1, [$r0+FTSDMC021_CR2]
|
|
bnez $r1, 1b
|
|
.endm
|
|
|
|
.globl mem_init
|
|
mem_init:
|
|
move $r11, $lp
|
|
|
|
/*
|
|
* mem_init:
|
|
* There are 2 bank connected to FTSMC020 on AG101
|
|
* BANK0: FLASH/ROM (SW5, J16), BANK1: OnBoard SDRAM.
|
|
* we need to set onboard SDRAM before remap and relocation.
|
|
*/
|
|
led 0x01
|
|
|
|
/*
|
|
* for Orca and Emerald
|
|
* disable write protection and reset bank size
|
|
*/
|
|
li $r0, SMC_BANK0_CR_A
|
|
lwi $r1, [$r0+#0x00]
|
|
ori $r1, $r1, 0x8f0
|
|
xori $r1, $r1, 0x8f0
|
|
/* check board */
|
|
li $r3, CONFIG_FTPMU010_BASE + BOARD_ID_REG
|
|
lwi $r3, [$r3]
|
|
li $r4, BOARD_ID_FAMILY_MASK
|
|
and $r3, $r3, $r4
|
|
li $r4, BOARD_ID_FAMILY_K7
|
|
xor $r4, $r3, $r4
|
|
beqz $r4, use_flash_16bit_boot
|
|
/* 32-bit mode */
|
|
use_flash_32bit_boot:
|
|
ori $r1, $r1, 0x50
|
|
li $r2, 0x00151151
|
|
j sdram_b0_cr
|
|
/* 16-bit mode */
|
|
use_flash_16bit_boot:
|
|
ori $r1, $r1, 0x60
|
|
li $r2, 0x00153153
|
|
/* SRAM bank0 config */
|
|
sdram_b0_cr:
|
|
swi $r1, [$r0+#0x00]
|
|
swi $r2, [$r0+#0x04]
|
|
|
|
/* config AHB Controller */
|
|
led 0x02
|
|
|
|
/*
|
|
* config PMU controller
|
|
*/
|
|
/* ftpmu010_dlldis_disable, must do it in lowleve_init */
|
|
led 0x03
|
|
setbf32 PMU_PDLLCR0_A, FTPMU010_PDLLCR0_DLLDIS ! 0x00010000
|
|
|
|
/*
|
|
* config SDRAM controller
|
|
*/
|
|
led 0x04
|
|
write32 SDMC_TP1_A, SDMC_TP1_D ! 0x00011312
|
|
led 0x05
|
|
write32 SDMC_TP2_A, SDMC_TP2_D ! 0x00480180
|
|
led 0x06
|
|
write32 SDMC_CR1_A, SDMC_CR1_D ! 0x00002326
|
|
|
|
led 0x07
|
|
write32 SDMC_CR2_A, FTSDMC021_CR2_IPREC ! 0x00000010
|
|
wait_sdram
|
|
|
|
led 0x08
|
|
write32 SDMC_CR2_A, FTSDMC021_CR2_ISMR ! 0x00000004
|
|
wait_sdram
|
|
|
|
led 0x09
|
|
write32 SDMC_CR2_A, FTSDMC021_CR2_IREF ! 0x00000008
|
|
wait_sdram
|
|
|
|
led 0x0a
|
|
move $lp, $r11
|
|
ret
|
|
|
|
|
|
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
move $r10, $lp
|
|
led 0x10
|
|
jal remap
|
|
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
|
|
led 0x1f
|
|
jal enable_fpu
|
|
#endif
|
|
led 0x20
|
|
ret $r10
|
|
|
|
remap:
|
|
move $r11, $lp
|
|
#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */
|
|
bal 2f
|
|
relo_base:
|
|
move $r0, $lp
|
|
#else
|
|
relo_base:
|
|
mfusr $r0, $pc
|
|
#endif /* __NDS32_N1213_43U1H__ */
|
|
|
|
/* Remapping */
|
|
led 0x1a
|
|
write32 SDMC_B0_BSR_A, SDMC_B0_BSR_D ! 0x00001800
|
|
write32 SDMC_B1_BSR_A, SDMC_B1_BSR_D ! 0x00001880
|
|
|
|
/* clear empty BSR registers */
|
|
led 0x1b
|
|
li $r4, CONFIG_FTSDMC021_BASE
|
|
li $r5, 0x0
|
|
swi $r5, [$r4 + FTSDMC021_BANK2_BSR]
|
|
swi $r5, [$r4 + FTSDMC021_BANK3_BSR]
|
|
|
|
#ifdef CONFIG_MEM_REMAP
|
|
/*
|
|
* Copy ROM code to SDRAM base for memory remap layout.
|
|
* This is not the real relocation, the real relocation is the function
|
|
* relocate_code() is start.S which supports the systems is memory
|
|
* remapped or not.
|
|
*/
|
|
/*
|
|
* Doing memory remap is essential for preparing some non-OS or RTOS
|
|
* applications.
|
|
*
|
|
* This is also a must on ADP-AG101 board.
|
|
* The reason is because the ROM/FLASH circuit on PCB board.
|
|
* AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
|
|
* ROM/FLASH is used to boot.
|
|
*
|
|
* When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
|
|
* and the FLASH is connected to BANK1.
|
|
* When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
|
|
* and the FLASH is connected to BANK0.
|
|
* It will occur problem when doing flash probing if the flash is at
|
|
* BANK0 (0x00000000) while memory remapping was skipped.
|
|
*
|
|
* Other board like ADP-AG101P may not enable this since there is only
|
|
* a FLASH connected to bank0.
|
|
*/
|
|
led 0x11
|
|
/*
|
|
* for Orca and Emerald
|
|
* read sdram base address automatically
|
|
*/
|
|
li $r5, AHBC_BSR6_A
|
|
lwi $r8, [$r5]
|
|
li $r4, 0xfff00000 /* r4 = bank6 base */
|
|
and $r4, $r4, $r8
|
|
|
|
la $r5, _start@GOTOFF
|
|
la $r6, _end@GOTOFF
|
|
1:
|
|
lwi.p $r7, [$r5], #4
|
|
swi.p $r7, [$r4], #4
|
|
blt $r5, $r6, 1b
|
|
|
|
/* set remap bit */
|
|
/*
|
|
* MEM remap bit is operational
|
|
* - use it to map writeable memory at 0x00000000, in place of flash
|
|
* - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff
|
|
* - after remap: flash/rom 0x80000000, sdram: 0x00000000
|
|
*/
|
|
led 0x1c
|
|
write32 SDMC_B0_BSR_A, 0x00001000
|
|
write32 SDMC_B1_BSR_A, 0x00001200
|
|
li $r5, CONFIG_SYS_TEXT_BASE /* flash base address */
|
|
add $r11, $r11, $r5 /* add flash address offset for ret */
|
|
add $r10, $r10, $r5
|
|
move $lp, $r11
|
|
setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1
|
|
|
|
/*
|
|
* for Orca and Emerald
|
|
* extend sdram size from 256MB to 2GB
|
|
*/
|
|
li $r5, AHBC_BSR6_A
|
|
lwi $r6, [$r5]
|
|
li $r4, 0xfff0ffff
|
|
and $r6 ,$r4, $r6
|
|
li $r4, 0x000b0000
|
|
or $r6, $r4, $r6
|
|
swi $r6, [$r5]
|
|
|
|
/*
|
|
* for Orca and Emerald
|
|
* extend rom base from 256MB to 2GB
|
|
*/
|
|
li $r4, AHBC_BSR4_A
|
|
lwi $r5, [$r4]
|
|
li $r6, 0xffffff
|
|
and $r5, $r5, $r6
|
|
li $r6, 0x80000000
|
|
or $r5, $r5, $r6
|
|
swi $r5, [$r4]
|
|
#endif /* #ifdef CONFIG_MEM_REMAP */
|
|
move $lp, $r11
|
|
2:
|
|
ret
|
|
|
|
/*
|
|
* enable_fpu:
|
|
* Some of Andes CPU version support FPU coprocessor, if so,
|
|
* and toolchain support FPU instruction set, we should enable it.
|
|
*/
|
|
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
|
|
enable_fpu:
|
|
mfsr $r0, $CPU_VER /* enable FPU if it exists */
|
|
srli $r0, $r0, 3
|
|
andi $r0, $r0, 1
|
|
beqz $r0, 1f /* skip if no COP */
|
|
mfsr $r0, $FUCOP_EXIST
|
|
srli $r0, $r0, 31
|
|
beqz $r0, 1f /* skip if no FPU */
|
|
mfsr $r0, $FUCOP_CTL
|
|
ori $r0, $r0, 1
|
|
mtsr $r0, $FUCOP_CTL
|
|
1:
|
|
ret
|
|
#endif
|
|
|
|
.globl show_led
|
|
show_led:
|
|
li $r8, (CONFIG_DEBUG_LED)
|
|
swi $r7, [$r8]
|
|
ret
|
|
#endif /* #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
|