mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
302 lines
8.3 KiB
C
302 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2010-2014
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/flow.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/pmc.h>
|
|
#include <linux/delay.h>
|
|
#include "../cpu.h"
|
|
|
|
/* Tegra114-specific CPU init code */
|
|
static void enable_cpu_power_rail(void)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 reg;
|
|
|
|
debug("%s entry\n", __func__);
|
|
|
|
/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
|
|
pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
|
|
pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
|
|
|
|
/*
|
|
* Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
|
|
* set it for 25ms (102MHz * .025)
|
|
*/
|
|
reg = 0x26E8F0;
|
|
writel(reg, &pmc->pmc_cpupwrgood_timer);
|
|
|
|
/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
|
|
clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
|
|
setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
|
|
|
|
/*
|
|
* Set CLK_RST_CONTROLLER_CPU_SOFTRST_CTRL2_0_CAR2PMC_CPU_ACK_WIDTH
|
|
* to 408 to satisfy the requirement of having at least 16 CPU clock
|
|
* cycles before clamp removal.
|
|
*/
|
|
|
|
clrbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 0xFFF);
|
|
setbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 408);
|
|
}
|
|
|
|
static void enable_cpu_clocks(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_XCPU];
|
|
u32 reg;
|
|
|
|
debug("%s entry\n", __func__);
|
|
|
|
/* Wait for PLL-X to lock */
|
|
do {
|
|
reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
|
|
} while ((reg & (1 << pllinfo->lock_det)) == 0);
|
|
|
|
/* Wait until all clocks are stable */
|
|
udelay(PLL_STABILIZATION_DELAY);
|
|
|
|
writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
|
|
writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
|
|
|
|
/* Always enable the main CPU complex clocks */
|
|
clock_enable(PERIPH_ID_CPU);
|
|
clock_enable(PERIPH_ID_CPULP);
|
|
clock_enable(PERIPH_ID_CPUG);
|
|
}
|
|
|
|
static void remove_cpu_resets(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 reg;
|
|
|
|
debug("%s entry\n", __func__);
|
|
/* Take the slow non-CPU partition out of reset */
|
|
reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
|
|
writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpulp_cmplx_clr);
|
|
|
|
/* Take the fast non-CPU partition out of reset */
|
|
reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
|
|
writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpug_cmplx_clr);
|
|
|
|
/* Clear the SW-controlled reset of the slow cluster */
|
|
reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
|
|
reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
|
|
writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
|
|
|
|
/* Clear the SW-controlled reset of the fast cluster */
|
|
reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
|
|
reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
|
|
reg |= (CLR_CPURESET1+CLR_DBGRESET1+CLR_CORERESET1+CLR_CXRESET1);
|
|
reg |= (CLR_CPURESET2+CLR_DBGRESET2+CLR_CORERESET2+CLR_CXRESET2);
|
|
reg |= (CLR_CPURESET3+CLR_DBGRESET3+CLR_CORERESET3+CLR_CXRESET3);
|
|
writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
|
|
}
|
|
|
|
/**
|
|
* Tegra114 requires some special clock initialization, including setting up
|
|
* the DVC I2C, turning on MSELECT and selecting the G CPU cluster
|
|
*/
|
|
void t114_init_clocks(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
|
|
u32 val;
|
|
|
|
debug("%s entry\n", __func__);
|
|
|
|
/* Set active CPU cluster to G */
|
|
clrbits_le32(&flow->cluster_control, 1);
|
|
|
|
writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
|
|
|
|
debug("Setting up PLLX\n");
|
|
init_pllx();
|
|
|
|
val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
|
|
writel(val, &clkrst->crc_clk_sys_rate);
|
|
|
|
/* Enable clocks to required peripherals. TBD - minimize this list */
|
|
debug("Enabling clocks\n");
|
|
|
|
clock_set_enable(PERIPH_ID_CACHE2, 1);
|
|
clock_set_enable(PERIPH_ID_GPIO, 1);
|
|
clock_set_enable(PERIPH_ID_TMR, 1);
|
|
clock_set_enable(PERIPH_ID_RTC, 1);
|
|
clock_set_enable(PERIPH_ID_CPU, 1);
|
|
clock_set_enable(PERIPH_ID_EMC, 1);
|
|
clock_set_enable(PERIPH_ID_I2C5, 1);
|
|
clock_set_enable(PERIPH_ID_FUSE, 1);
|
|
clock_set_enable(PERIPH_ID_PMC, 1);
|
|
clock_set_enable(PERIPH_ID_APBDMA, 1);
|
|
clock_set_enable(PERIPH_ID_MEM, 1);
|
|
clock_set_enable(PERIPH_ID_IRAMA, 1);
|
|
clock_set_enable(PERIPH_ID_IRAMB, 1);
|
|
clock_set_enable(PERIPH_ID_IRAMC, 1);
|
|
clock_set_enable(PERIPH_ID_IRAMD, 1);
|
|
clock_set_enable(PERIPH_ID_CORESIGHT, 1);
|
|
clock_set_enable(PERIPH_ID_MSELECT, 1);
|
|
clock_set_enable(PERIPH_ID_EMC1, 1);
|
|
clock_set_enable(PERIPH_ID_MC1, 1);
|
|
clock_set_enable(PERIPH_ID_DVFS, 1);
|
|
|
|
/*
|
|
* Set MSELECT clock source as PLLP (00), and ask for a clock
|
|
* divider that would set the MSELECT clock at 102MHz for a
|
|
* PLLP base of 408MHz.
|
|
*/
|
|
clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
|
|
CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
|
|
|
|
/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
|
|
clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
|
|
|
|
/* Give clocks time to stabilize */
|
|
udelay(1000);
|
|
|
|
/* Take required peripherals out of reset */
|
|
debug("Taking periphs out of reset\n");
|
|
reset_set_enable(PERIPH_ID_CACHE2, 0);
|
|
reset_set_enable(PERIPH_ID_GPIO, 0);
|
|
reset_set_enable(PERIPH_ID_TMR, 0);
|
|
reset_set_enable(PERIPH_ID_COP, 0);
|
|
reset_set_enable(PERIPH_ID_EMC, 0);
|
|
reset_set_enable(PERIPH_ID_I2C5, 0);
|
|
reset_set_enable(PERIPH_ID_FUSE, 0);
|
|
reset_set_enable(PERIPH_ID_APBDMA, 0);
|
|
reset_set_enable(PERIPH_ID_MEM, 0);
|
|
reset_set_enable(PERIPH_ID_CORESIGHT, 0);
|
|
reset_set_enable(PERIPH_ID_MSELECT, 0);
|
|
reset_set_enable(PERIPH_ID_EMC1, 0);
|
|
reset_set_enable(PERIPH_ID_MC1, 0);
|
|
reset_set_enable(PERIPH_ID_DVFS, 0);
|
|
|
|
debug("%s exit\n", __func__);
|
|
}
|
|
|
|
static bool is_partition_powered(u32 partid)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
u32 reg;
|
|
|
|
/* Get power gate status */
|
|
reg = readl(&pmc->pmc_pwrgate_status);
|
|
return !!(reg & (1 << partid));
|
|
}
|
|
|
|
static bool is_clamp_enabled(u32 partid)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
u32 reg;
|
|
|
|
/* Get clamp status. */
|
|
reg = readl(&pmc->pmc_clamp_status);
|
|
return !!(reg & (1 << partid));
|
|
}
|
|
|
|
static void power_partition(u32 partid)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
|
|
debug("%s: part ID = %08X\n", __func__, partid);
|
|
/* Is the partition already on? */
|
|
if (!is_partition_powered(partid)) {
|
|
/* No, toggle the partition power state (OFF -> ON) */
|
|
debug("power_partition, toggling state\n");
|
|
writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
|
|
|
|
/* Wait for the power to come up */
|
|
while (!is_partition_powered(partid))
|
|
;
|
|
|
|
/* Wait for the clamp status to be cleared */
|
|
while (is_clamp_enabled(partid))
|
|
;
|
|
|
|
/* Give I/O signals time to stabilize */
|
|
udelay(IO_STABILIZATION_DELAY);
|
|
}
|
|
}
|
|
|
|
void powerup_cpus(void)
|
|
{
|
|
/* We boot to the fast cluster */
|
|
debug("%s entry: G cluster\n", __func__);
|
|
|
|
/* Power up the fast cluster rail partition */
|
|
power_partition(CRAIL);
|
|
|
|
/* Power up the fast cluster non-CPU partition */
|
|
power_partition(C0NC);
|
|
|
|
/* Power up the fast cluster CPU0 partition */
|
|
power_partition(CE0);
|
|
}
|
|
|
|
void start_cpu(u32 reset_vector)
|
|
{
|
|
u32 imme, inst;
|
|
|
|
debug("%s entry, reset_vector = %x\n", __func__, reset_vector);
|
|
|
|
t114_init_clocks();
|
|
|
|
/* Enable VDD_CPU */
|
|
enable_cpu_power_rail();
|
|
|
|
/* Get the CPU(s) running */
|
|
enable_cpu_clocks();
|
|
|
|
/* Enable CoreSight */
|
|
clock_enable_coresight(1);
|
|
|
|
/* Take CPU(s) out of reset */
|
|
remove_cpu_resets();
|
|
|
|
/* Set the entry point for CPU execution from reset */
|
|
|
|
/*
|
|
* A01P with patched boot ROM; vector hard-coded to 0x4003fffc.
|
|
* See nvbug 1193357 for details.
|
|
*/
|
|
|
|
/* mov r0, #lsb(reset_vector) */
|
|
imme = reset_vector & 0xffff;
|
|
inst = imme & 0xfff;
|
|
inst |= ((imme >> 12) << 16);
|
|
inst |= 0xe3000000;
|
|
writel(inst, 0x4003fff0);
|
|
|
|
/* movt r0, #msb(reset_vector) */
|
|
imme = (reset_vector >> 16) & 0xffff;
|
|
inst = imme & 0xfff;
|
|
inst |= ((imme >> 12) << 16);
|
|
inst |= 0xe3400000;
|
|
writel(inst, 0x4003fff4);
|
|
|
|
/* bx r0 */
|
|
writel(0xe12fff10, 0x4003fff8);
|
|
|
|
/* b -12 */
|
|
imme = (u32)-20;
|
|
inst = (imme >> 2) & 0xffffff;
|
|
inst |= 0xea000000;
|
|
writel(inst, 0x4003fffc);
|
|
|
|
/* Write to original location for compatibility */
|
|
writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
|
|
|
|
/* If the CPU(s) don't already have power, power 'em up */
|
|
powerup_cpus();
|
|
}
|