u-boot/board/Marvell/db-88f6720/db-88f6720.c
Stefan Roese 606576d54b arm: mvebu: Add basic support for Armada 375 eval board db-88f6720
This patch adds basic support for the Marvell A375 eval board. Tested
are the following interfaces:
- I2C
- SPI
- SPI NOR
- Ethernet (mvpp2), port 0 & 1

Currently the A375 SerDes and DDR3 init code is not intergrated. So
the SPL U-Boot is not fully functional.

Right now, this A375 mainline U-Boot can only be used by chainloading
it via the original Marvell U-Boot. This can be done via this
command:

=> tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-04-04 11:22:10 +02:00

91 lines
2.8 KiB
C

/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Those values and defines are taken from the Marvell U-Boot version
* "u-boot-2013.01-2014_T2.0" for the board Armada 375 DB-88F6720
*/
#define DB_88F6720_MPP0_7 0x00020020 /* SPI */
#define DB_88F6720_MPP8_15 0x22000022 /* SPI , I2C */
#define DB_88F6720_MPP16_23 0x22222222 /* UART, TDM*/
#define DB_88F6720_MPP24_31 0x33333333 /* SDIO, SPI1*/
#define DB_88F6720_MPP32_39 0x04403330 /* SPI1, External SMI */
#define DB_88F6720_MPP40_47 0x22002044 /* UART1, GE0, SATA0 LED */
#define DB_88F6720_MPP48_55 0x22222222 /* GE0 */
#define DB_88F6720_MPP56_63 0x04444422 /* GE0 , LED_MATRIX, GPIO */
#define DB_88F6720_MPP64_67 0x014 /* LED_MATRIX, SATA1 LED*/
#define DB_88F6720_GPP_OUT_ENA_LOW 0xFFFFFFFF
#define DB_88F6720_GPP_OUT_ENA_MID 0x7FFFFFFF
#define DB_88F6720_GPP_OUT_ENA_HIGH 0xFFFFFFFF
#define DB_88F6720_GPP_OUT_VAL_LOW 0x0
#define DB_88F6720_GPP_OUT_VAL_MID BIT(31) /* SATA Power output enable */
#define DB_88F6720_GPP_OUT_VAL_HIGH 0x0
#define DB_88F6720_GPP_POL_LOW 0x0
#define DB_88F6720_GPP_POL_MID 0x0
#define DB_88F6720_GPP_POL_HIGH 0x0
int board_early_init_f(void)
{
/* Configure MPP */
writel(DB_88F6720_MPP0_7, MVEBU_MPP_BASE + 0x00);
writel(DB_88F6720_MPP8_15, MVEBU_MPP_BASE + 0x04);
writel(DB_88F6720_MPP16_23, MVEBU_MPP_BASE + 0x08);
writel(DB_88F6720_MPP24_31, MVEBU_MPP_BASE + 0x0c);
writel(DB_88F6720_MPP32_39, MVEBU_MPP_BASE + 0x10);
writel(DB_88F6720_MPP40_47, MVEBU_MPP_BASE + 0x14);
writel(DB_88F6720_MPP48_55, MVEBU_MPP_BASE + 0x18);
writel(DB_88F6720_MPP56_63, MVEBU_MPP_BASE + 0x1c);
writel(DB_88F6720_MPP64_67, MVEBU_MPP_BASE + 0x20);
/* Configure GPIO */
/* Set GPP Out value */
writel(DB_88F6720_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
writel(DB_88F6720_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
writel(DB_88F6720_GPP_OUT_VAL_HIGH, MVEBU_GPIO2_BASE + 0x00);
/* Set GPP Polarity */
writel(DB_88F6720_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
writel(DB_88F6720_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
writel(DB_88F6720_GPP_POL_HIGH, MVEBU_GPIO2_BASE + 0x0c);
/* Set GPP Out Enable */
writel(DB_88F6720_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
writel(DB_88F6720_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
writel(DB_88F6720_GPP_OUT_ENA_HIGH, MVEBU_GPIO2_BASE + 0x04);
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
return 0;
}
int checkboard(void)
{
puts("Board: Marvell DB-88F6720\n");
return 0;
}
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Built in controller(s) come first */
return pci_eth_init(bis);
}