mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 17:28:15 +00:00
34ee786e5b
By making the tqma6_iomuxc_spi() weak, this patch adds the possibility to add a different function for this SPI configuration. This can be used by other baseboards, that might have a different SPI setup. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <sr@denx.de>
279 lines
6.6 KiB
C
279 lines
6.6 KiB
C
/*
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*
|
|
* Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
|
|
* Author: Markus Niebel <markus.niebel@tq-group.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/imx-common/mxc_i2c.h>
|
|
#include <asm/imx-common/spi.h>
|
|
#include <common.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <libfdt.h>
|
|
#include <i2c.h>
|
|
#include <mmc.h>
|
|
#include <power/pfuze100_pmic.h>
|
|
#include <power/pmic.h>
|
|
|
|
#include "tqma6_bb.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
|
|
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define GPIO_OUT_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define GPIO_IN_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = imx_ddr_size();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const uint16_t tqma6_emmc_dsr = 0x0100;
|
|
|
|
/* eMMC on USDHCI3 always present */
|
|
static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = {
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_CMD__SD3_CMD, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT0__SD3_DATA0, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT1__SD3_DATA1, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT2__SD3_DATA2, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT3__SD3_DATA3, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT4__SD3_DATA4, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT5__SD3_DATA5, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT6__SD3_DATA6, USDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_DAT7__SD3_DATA7, USDHC_PAD_CTRL),
|
|
/* eMMC reset */
|
|
NEW_PAD_CTRL(MX6_PAD_SD3_RST__SD3_RESET, GPIO_OUT_PAD_CTRL),
|
|
};
|
|
|
|
/*
|
|
* According to board_mmc_init() the following map is done:
|
|
* (U-boot device node) (Physical Port)
|
|
* mmc0 eMMC (SD3) on TQMa6
|
|
* mmc1 .. n optional slots used on baseboard
|
|
*/
|
|
struct fsl_esdhc_cfg tqma6_usdhc_cfg = {
|
|
.esdhc_base = USDHC3_BASE_ADDR,
|
|
.max_bus_width = 8,
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret = 0;
|
|
|
|
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
|
|
/* eMMC/uSDHC3 is always present */
|
|
ret = 1;
|
|
else
|
|
ret = tqma6_bb_board_mmc_getcd(mmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_getwp(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret = 0;
|
|
|
|
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
|
|
/* eMMC/uSDHC3 is always present */
|
|
ret = 0;
|
|
else
|
|
ret = tqma6_bb_board_mmc_getwp(mmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(tqma6_usdhc3_pads,
|
|
ARRAY_SIZE(tqma6_usdhc3_pads));
|
|
tqma6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
if (fsl_esdhc_initialize(bis, &tqma6_usdhc_cfg)) {
|
|
puts("Warning: failed to initialize eMMC dev\n");
|
|
} else {
|
|
struct mmc *mmc = find_mmc_device(0);
|
|
if (mmc)
|
|
mmc_set_dsr(mmc, tqma6_emmc_dsr);
|
|
}
|
|
|
|
tqma6_bb_board_mmc_init(bis);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = {
|
|
/* SS1 */
|
|
NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
|
|
};
|
|
|
|
#define TQMA6_SF_CS_GPIO IMX_GPIO_NR(3, 19)
|
|
|
|
static unsigned const tqma6_ecspi1_cs[] = {
|
|
TQMA6_SF_CS_GPIO,
|
|
};
|
|
|
|
__weak void tqma6_iomuxc_spi(void)
|
|
{
|
|
unsigned i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tqma6_ecspi1_cs); ++i)
|
|
gpio_direction_output(tqma6_ecspi1_cs[i], 1);
|
|
imx_iomux_v3_setup_multiple_pads(tqma6_ecspi1_pads,
|
|
ARRAY_SIZE(tqma6_ecspi1_pads));
|
|
}
|
|
|
|
int board_spi_cs_gpio(unsigned bus, unsigned cs)
|
|
{
|
|
return ((bus == CONFIG_SF_DEFAULT_BUS) &&
|
|
(cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1;
|
|
}
|
|
|
|
static struct i2c_pads_info tqma6_i2c3_pads = {
|
|
/* I2C3: on board LM75, M24C64, */
|
|
.scl = {
|
|
.i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__I2C3_SCL,
|
|
I2C_PAD_CTRL),
|
|
.gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__GPIO1_IO05,
|
|
I2C_PAD_CTRL),
|
|
.gp = IMX_GPIO_NR(1, 5)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__I2C3_SDA,
|
|
I2C_PAD_CTRL),
|
|
.gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06,
|
|
I2C_PAD_CTRL),
|
|
.gp = IMX_GPIO_NR(1, 6)
|
|
}
|
|
};
|
|
|
|
static void tqma6_setup_i2c(void)
|
|
{
|
|
int ret;
|
|
/*
|
|
* use logical index for bus, e.g. I2C1 -> 0
|
|
* warn on error
|
|
*/
|
|
ret = setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
|
|
if (ret)
|
|
printf("setup I2C3 failed: %d\n", ret);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
return tqma6_bb_board_early_init_f();
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
tqma6_iomuxc_spi();
|
|
tqma6_setup_i2c();
|
|
|
|
tqma6_bb_board_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *tqma6_get_boardname(void)
|
|
{
|
|
u32 cpurev = get_cpu_rev();
|
|
|
|
switch ((cpurev & 0xFF000) >> 12) {
|
|
case MXC_CPU_MX6SOLO:
|
|
return "TQMa6S";
|
|
break;
|
|
case MXC_CPU_MX6DL:
|
|
return "TQMa6DL";
|
|
break;
|
|
case MXC_CPU_MX6D:
|
|
return "TQMa6D";
|
|
break;
|
|
case MXC_CPU_MX6Q:
|
|
return "TQMa6Q";
|
|
break;
|
|
default:
|
|
return "??";
|
|
};
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
struct pmic *p;
|
|
u32 reg;
|
|
|
|
setenv("board_name", tqma6_get_boardname());
|
|
|
|
/*
|
|
* configure PFUZE100 PMIC:
|
|
* TODO: should go to power_init_board if bus switching is
|
|
* fixed in generic power code
|
|
*/
|
|
power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
|
|
p = pmic_get("PFUZE100");
|
|
if (p && !pmic_probe(p)) {
|
|
pmic_reg_read(p, PFUZE100_DEVICEID, ®);
|
|
printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
|
|
}
|
|
|
|
tqma6_bb_board_late_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: %s on a %s\n", tqma6_get_boardname(),
|
|
tqma6_bb_get_boardname());
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Device Tree Support
|
|
*/
|
|
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
/* bring in eMMC dsr settings */
|
|
do_fixup_by_path_u32(blob,
|
|
"/soc/aips-bus@02100000/usdhc@02198000",
|
|
"dsr", tqma6_emmc_dsr, 2);
|
|
tqma6_bb_ft_board_setup(blob, bd);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
|