u-boot/arch/powerpc/dts/qoriq-fman3-1-1g-5.dtsi
Camelia Groza 3a25db1753 powerpc: dts: qoriq: update the mdio offsets under the second FMan v3
When two FMan's are present on a board, the MDIO nodes are found at the
same offsets inside each FMan. This causes "non unique device name"
errors when registering the MDIO nodes under the second FMan. Fix this
by updating the offsets of the MDIO nodes to include the parent FMan's
offset.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:26:56 +05:30

43 lines
945 B
Text

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ]
*
* Copyright 2012 - 2015 Freescale Semiconductor Inc.
* Copyright 2020 NXP
*
*/
fman@500000 {
fman1_rx_0x0d: port@8d000 {
cell-index = <0xd>;
compatible = "fsl,fman-v3-port-rx";
reg = <0x8d000 0x1000>;
};
fman1_tx_0x2d: port@ad000 {
cell-index = <0x2d>;
compatible = "fsl,fman-v3-port-tx";
reg = <0xad000 0x1000>;
};
ethernet@ea000 {
cell-index = <5>;
compatible = "fsl,fman-memac";
reg = <0xea000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
ptp-timer = <&ptp_timer1>;
pcsphy-handle = <&pcsphy13>;
};
mdio@5eb000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xeb000 0x1000>;
fsl,erratum-a011043; /* must ignore read errors */
pcsphy13: ethernet-phy@0 {
reg = <0x0>;
};
};
};