mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2243 lines
58 KiB
C
2243 lines
58 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus.
|
|
*
|
|
* Interrupt support is added. Now, it has been tested
|
|
* on ULI1575 chip and works well with USB keyboard.
|
|
*
|
|
* (C) Copyright 2007
|
|
* Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com>
|
|
*
|
|
* (C) Copyright 2003
|
|
* Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
|
|
*
|
|
* Note: Much of this code has been derived from Linux 2.4
|
|
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
|
|
* (C) Copyright 2000-2002 David Brownell
|
|
*
|
|
* Modified for the MP2USB by (C) Copyright 2005 Eric Benard
|
|
* ebenard@eukrea.com - based on s3c24x0's driver
|
|
*/
|
|
/*
|
|
* IMPORTANT NOTES
|
|
* 1 - Read doc/README.generic_usb_ohci
|
|
* 2 - this driver is intended for use with USB Mass Storage Devices
|
|
* (BBB) and USB keyboard. There is NO support for Isochronous pipes!
|
|
* 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
|
|
* to activate workaround for bug #41 or this driver will NOT work!
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <asm/byteorder.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/cache.h>
|
|
#include <linux/delay.h>
|
|
|
|
#if defined(CONFIG_PCI_OHCI)
|
|
# include <pci.h>
|
|
#if !defined(CONFIG_PCI_OHCI_DEVNO)
|
|
#define CONFIG_PCI_OHCI_DEVNO 0
|
|
#endif
|
|
#endif
|
|
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <usb.h>
|
|
|
|
#include "ohci.h"
|
|
|
|
#ifdef CONFIG_AT91RM9200
|
|
#include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_ARM920T) || \
|
|
defined(CONFIG_PCI_OHCI) || \
|
|
defined(CONFIG_DM_PCI) || \
|
|
defined(CONFIG_SYS_OHCI_USE_NPS)
|
|
# define OHCI_USE_NPS /* force NoPowerSwitching mode */
|
|
#endif
|
|
|
|
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
|
|
#undef DEBUG
|
|
#undef SHOW_INFO
|
|
#undef OHCI_FILL_TRACE
|
|
|
|
/* For initializing controller (mask in an HCFS mode too) */
|
|
#define OHCI_CONTROL_INIT \
|
|
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_USB)
|
|
#ifdef CONFIG_PCI_OHCI
|
|
static struct pci_device_id ohci_pci_ids[] = {
|
|
{0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
|
|
{0x1033, 0x0035}, /* NEC PCI OHCI module ids */
|
|
{0x1131, 0x1561}, /* Philips 1561 PCI OHCI module ids */
|
|
/* Please add supported PCI OHCI controller ids here */
|
|
{0, 0}
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI_EHCI_DEVNO
|
|
static struct pci_device_id ehci_pci_ids[] = {
|
|
{0x1131, 0x1562}, /* Philips 1562 PCI EHCI module ids */
|
|
/* Please add supported PCI EHCI controller ids here */
|
|
{0, 0}
|
|
};
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
|
|
#else
|
|
#define dbg(format, arg...) do {} while (0)
|
|
#endif /* DEBUG */
|
|
#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
|
|
#ifdef SHOW_INFO
|
|
#define info(format, arg...) printf("INFO: " format "\n", ## arg)
|
|
#else
|
|
#define info(format, arg...) do {} while (0)
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
|
|
# define m16_swap(x) cpu_to_be16(x)
|
|
# define m32_swap(x) cpu_to_be32(x)
|
|
#else
|
|
# define m16_swap(x) cpu_to_le16(x)
|
|
# define m32_swap(x) cpu_to_le32(x)
|
|
#endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
|
|
|
|
/* We really should do proper cache flushing everywhere */
|
|
#define flush_dcache_buffer(addr, size) \
|
|
flush_dcache_range((unsigned long)(addr), \
|
|
ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN))
|
|
#define invalidate_dcache_buffer(addr, size) \
|
|
invalidate_dcache_range((unsigned long)(addr), \
|
|
ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN))
|
|
|
|
/* Do not use sizeof(ed / td) as our ed / td structs contain extra members */
|
|
#define flush_dcache_ed(addr) flush_dcache_buffer(addr, 16)
|
|
#define flush_dcache_td(addr) flush_dcache_buffer(addr, 16)
|
|
#define flush_dcache_iso_td(addr) flush_dcache_buffer(addr, 32)
|
|
#define flush_dcache_hcca(addr) flush_dcache_buffer(addr, 256)
|
|
#define invalidate_dcache_ed(addr) invalidate_dcache_buffer(addr, 16)
|
|
#define invalidate_dcache_td(addr) invalidate_dcache_buffer(addr, 16)
|
|
#define invalidate_dcache_iso_td(addr) invalidate_dcache_buffer(addr, 32)
|
|
#define invalidate_dcache_hcca(addr) invalidate_dcache_buffer(addr, 256)
|
|
|
|
#if CONFIG_IS_ENABLED(DM_USB)
|
|
/*
|
|
* The various ohci_mdelay(1) calls in the code seem unnecessary. We keep
|
|
* them around when building for older boards not yet converted to the dm
|
|
* just in case (to avoid regressions), for dm this turns them into nops.
|
|
*/
|
|
#define ohci_mdelay(x)
|
|
#else
|
|
#define ohci_mdelay(x) mdelay(x)
|
|
#endif
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_USB)
|
|
/* global ohci_t */
|
|
static ohci_t gohci;
|
|
/* this must be aligned to a 256 byte boundary */
|
|
struct ohci_hcca ghcca[1];
|
|
#endif
|
|
|
|
/* mapping of the OHCI CC status to error codes */
|
|
static int cc_to_error[16] = {
|
|
/* No Error */ 0,
|
|
/* CRC Error */ USB_ST_CRC_ERR,
|
|
/* Bit Stuff */ USB_ST_BIT_ERR,
|
|
/* Data Togg */ USB_ST_CRC_ERR,
|
|
/* Stall */ USB_ST_STALLED,
|
|
/* DevNotResp */ -1,
|
|
/* PIDCheck */ USB_ST_BIT_ERR,
|
|
/* UnExpPID */ USB_ST_BIT_ERR,
|
|
/* DataOver */ USB_ST_BUF_ERR,
|
|
/* DataUnder */ USB_ST_BUF_ERR,
|
|
/* reservd */ -1,
|
|
/* reservd */ -1,
|
|
/* BufferOver */ USB_ST_BUF_ERR,
|
|
/* BuffUnder */ USB_ST_BUF_ERR,
|
|
/* Not Access */ -1,
|
|
/* Not Access */ -1
|
|
};
|
|
|
|
static const char *cc_to_string[16] = {
|
|
"No Error",
|
|
"CRC: Last data packet from endpoint contained a CRC error.",
|
|
"BITSTUFFING: Last data packet from endpoint contained a bit " \
|
|
"stuffing violation",
|
|
"DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \
|
|
"that did not match the expected value.",
|
|
"STALL: TD was moved to the Done Queue because the endpoint returned" \
|
|
" a STALL PID",
|
|
"DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \
|
|
"not provide a handshake (OUT)",
|
|
"PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\
|
|
"(IN) or handshake (OUT)",
|
|
"UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \
|
|
"value is not defined.",
|
|
"DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \
|
|
"either the size of the maximum data packet allowed\n" \
|
|
"from the endpoint (found in MaximumPacketSize field\n" \
|
|
"of ED) or the remaining buffer size.",
|
|
"DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \
|
|
"and that amount was not sufficient to fill the\n" \
|
|
"specified buffer",
|
|
"reserved1",
|
|
"reserved2",
|
|
"BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \
|
|
"than it could be written to system memory",
|
|
"BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \
|
|
"system memory fast enough to keep up with data USB " \
|
|
"data rate.",
|
|
"NOT ACCESSED: This code is set by software before the TD is placed" \
|
|
"on a list to be processed by the HC.(1)",
|
|
"NOT ACCESSED: This code is set by software before the TD is placed" \
|
|
"on a list to be processed by the HC.(2)",
|
|
};
|
|
|
|
static inline u32 roothub_a(struct ohci *hc)
|
|
{ return ohci_readl(&hc->regs->roothub.a); }
|
|
static inline u32 roothub_b(struct ohci *hc)
|
|
{ return ohci_readl(&hc->regs->roothub.b); }
|
|
static inline u32 roothub_status(struct ohci *hc)
|
|
{ return ohci_readl(&hc->regs->roothub.status); }
|
|
static inline u32 roothub_portstatus(struct ohci *hc, int i)
|
|
{ return ohci_readl(&hc->regs->roothub.portstatus[i]); }
|
|
|
|
/* forward declaration */
|
|
static int hc_interrupt(ohci_t *ohci);
|
|
static void td_submit_job(ohci_t *ohci, struct usb_device *dev,
|
|
unsigned long pipe, void *buffer, int transfer_len,
|
|
struct devrequest *setup, urb_priv_t *urb,
|
|
int interval);
|
|
static int ep_link(ohci_t * ohci, ed_t * ed);
|
|
static int ep_unlink(ohci_t * ohci, ed_t * ed);
|
|
static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev,
|
|
unsigned long pipe, int interval, int load);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* TDs ... */
|
|
static struct td *td_alloc(ohci_dev_t *ohci_dev, struct usb_device *usb_dev)
|
|
{
|
|
int i;
|
|
struct td *td;
|
|
|
|
td = NULL;
|
|
for (i = 0; i < NUM_TD; i++)
|
|
{
|
|
if (ohci_dev->tds[i].usb_dev == NULL)
|
|
{
|
|
td = &ohci_dev->tds[i];
|
|
td->usb_dev = usb_dev;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return td;
|
|
}
|
|
|
|
static inline void ed_free(struct ed *ed)
|
|
{
|
|
ed->usb_dev = NULL;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* URB support functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* free HCD-private data associated with this URB */
|
|
|
|
static void urb_free_priv(urb_priv_t *urb)
|
|
{
|
|
int i;
|
|
int last;
|
|
struct td *td;
|
|
|
|
last = urb->length - 1;
|
|
if (last >= 0) {
|
|
for (i = 0; i <= last; i++) {
|
|
td = urb->td[i];
|
|
if (td) {
|
|
td->usb_dev = NULL;
|
|
urb->td[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
free(urb);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef DEBUG
|
|
static int sohci_get_current_frame_number(ohci_t *ohci);
|
|
|
|
/* debug| print the main components of an URB
|
|
* small: 0) header + data packets 1) just header */
|
|
|
|
static void pkt_print(ohci_t *ohci, urb_priv_t *purb, struct usb_device *dev,
|
|
unsigned long pipe, void *buffer, int transfer_len,
|
|
struct devrequest *setup, char *str, int small)
|
|
{
|
|
dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx",
|
|
str,
|
|
sohci_get_current_frame_number(ohci),
|
|
usb_pipedevice(pipe),
|
|
usb_pipeendpoint(pipe),
|
|
usb_pipeout(pipe)? 'O': 'I',
|
|
usb_pipetype(pipe) < 2 ? \
|
|
(usb_pipeint(pipe)? "INTR": "ISOC"): \
|
|
(usb_pipecontrol(pipe)? "CTRL": "BULK"),
|
|
(purb ? purb->actual_length : 0),
|
|
transfer_len, dev->status);
|
|
#ifdef OHCI_VERBOSE_DEBUG
|
|
if (!small) {
|
|
int i, len;
|
|
|
|
if (usb_pipecontrol(pipe)) {
|
|
printf(__FILE__ ": cmd(8):");
|
|
for (i = 0; i < 8 ; i++)
|
|
printf(" %02x", ((__u8 *) setup) [i]);
|
|
printf("\n");
|
|
}
|
|
if (transfer_len > 0 && buffer) {
|
|
printf(__FILE__ ": data(%d/%d):",
|
|
(purb ? purb->actual_length : 0),
|
|
transfer_len);
|
|
len = usb_pipeout(pipe)? transfer_len:
|
|
(purb ? purb->actual_length : 0);
|
|
for (i = 0; i < 16 && i < len; i++)
|
|
printf(" %02x", ((__u8 *) buffer) [i]);
|
|
printf("%s\n", i < len? "...": "");
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* just for debugging; prints non-empty branches of the int ed tree
|
|
* inclusive iso eds */
|
|
void ep_print_int_eds(ohci_t *ohci, char *str)
|
|
{
|
|
int i, j;
|
|
__u32 *ed_p;
|
|
for (i = 0; i < 32; i++) {
|
|
j = 5;
|
|
ed_p = &(ohci->hcca->int_table [i]);
|
|
if (*ed_p == 0)
|
|
continue;
|
|
invalidate_dcache_ed(ed_p);
|
|
printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
|
|
while (*ed_p != 0 && j--) {
|
|
ed_t *ed = (ed_t *)m32_swap(ed_p);
|
|
invalidate_dcache_ed(ed);
|
|
printf(" ed: %4x;", ed->hwINFO);
|
|
ed_p = &ed->hwNextED;
|
|
}
|
|
printf("\n");
|
|
}
|
|
}
|
|
|
|
static void ohci_dump_intr_mask(char *label, __u32 mask)
|
|
{
|
|
dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
|
|
label,
|
|
mask,
|
|
(mask & OHCI_INTR_MIE) ? " MIE" : "",
|
|
(mask & OHCI_INTR_OC) ? " OC" : "",
|
|
(mask & OHCI_INTR_RHSC) ? " RHSC" : "",
|
|
(mask & OHCI_INTR_FNO) ? " FNO" : "",
|
|
(mask & OHCI_INTR_UE) ? " UE" : "",
|
|
(mask & OHCI_INTR_RD) ? " RD" : "",
|
|
(mask & OHCI_INTR_SF) ? " SF" : "",
|
|
(mask & OHCI_INTR_WDH) ? " WDH" : "",
|
|
(mask & OHCI_INTR_SO) ? " SO" : ""
|
|
);
|
|
}
|
|
|
|
static void maybe_print_eds(char *label, __u32 value)
|
|
{
|
|
ed_t *edp = (ed_t *)value;
|
|
|
|
if (value) {
|
|
dbg("%s %08x", label, value);
|
|
invalidate_dcache_ed(edp);
|
|
dbg("%08x", edp->hwINFO);
|
|
dbg("%08x", edp->hwTailP);
|
|
dbg("%08x", edp->hwHeadP);
|
|
dbg("%08x", edp->hwNextED);
|
|
}
|
|
}
|
|
|
|
static char *hcfs2string(int state)
|
|
{
|
|
switch (state) {
|
|
case OHCI_USB_RESET: return "reset";
|
|
case OHCI_USB_RESUME: return "resume";
|
|
case OHCI_USB_OPER: return "operational";
|
|
case OHCI_USB_SUSPEND: return "suspend";
|
|
}
|
|
return "?";
|
|
}
|
|
|
|
/* dump control and status registers */
|
|
static void ohci_dump_status(ohci_t *controller)
|
|
{
|
|
struct ohci_regs *regs = controller->regs;
|
|
__u32 temp;
|
|
|
|
temp = ohci_readl(®s->revision) & 0xff;
|
|
if (temp != 0x10)
|
|
dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
|
|
|
|
temp = ohci_readl(®s->control);
|
|
dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
|
|
(temp & OHCI_CTRL_RWE) ? " RWE" : "",
|
|
(temp & OHCI_CTRL_RWC) ? " RWC" : "",
|
|
(temp & OHCI_CTRL_IR) ? " IR" : "",
|
|
hcfs2string(temp & OHCI_CTRL_HCFS),
|
|
(temp & OHCI_CTRL_BLE) ? " BLE" : "",
|
|
(temp & OHCI_CTRL_CLE) ? " CLE" : "",
|
|
(temp & OHCI_CTRL_IE) ? " IE" : "",
|
|
(temp & OHCI_CTRL_PLE) ? " PLE" : "",
|
|
temp & OHCI_CTRL_CBSR
|
|
);
|
|
|
|
temp = ohci_readl(®s->cmdstatus);
|
|
dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
|
|
(temp & OHCI_SOC) >> 16,
|
|
(temp & OHCI_OCR) ? " OCR" : "",
|
|
(temp & OHCI_BLF) ? " BLF" : "",
|
|
(temp & OHCI_CLF) ? " CLF" : "",
|
|
(temp & OHCI_HCR) ? " HCR" : ""
|
|
);
|
|
|
|
ohci_dump_intr_mask("intrstatus", ohci_readl(®s->intrstatus));
|
|
ohci_dump_intr_mask("intrenable", ohci_readl(®s->intrenable));
|
|
|
|
maybe_print_eds("ed_periodcurrent",
|
|
ohci_readl(®s->ed_periodcurrent));
|
|
|
|
maybe_print_eds("ed_controlhead", ohci_readl(®s->ed_controlhead));
|
|
maybe_print_eds("ed_controlcurrent",
|
|
ohci_readl(®s->ed_controlcurrent));
|
|
|
|
maybe_print_eds("ed_bulkhead", ohci_readl(®s->ed_bulkhead));
|
|
maybe_print_eds("ed_bulkcurrent", ohci_readl(®s->ed_bulkcurrent));
|
|
|
|
maybe_print_eds("donehead", ohci_readl(®s->donehead));
|
|
}
|
|
|
|
static void ohci_dump_roothub(ohci_t *controller, int verbose)
|
|
{
|
|
__u32 temp, ndp, i;
|
|
|
|
temp = roothub_a(controller);
|
|
ndp = (temp & RH_A_NDP);
|
|
#ifdef CONFIG_AT91C_PQFP_UHPBUG
|
|
ndp = (ndp == 2) ? 1:0;
|
|
#endif
|
|
if (verbose) {
|
|
dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
|
|
((temp & RH_A_POTPGT) >> 24) & 0xff,
|
|
(temp & RH_A_NOCP) ? " NOCP" : "",
|
|
(temp & RH_A_OCPM) ? " OCPM" : "",
|
|
(temp & RH_A_DT) ? " DT" : "",
|
|
(temp & RH_A_NPS) ? " NPS" : "",
|
|
(temp & RH_A_PSM) ? " PSM" : "",
|
|
ndp
|
|
);
|
|
temp = roothub_b(controller);
|
|
dbg("roothub.b: %08x PPCM=%04x DR=%04x",
|
|
temp,
|
|
(temp & RH_B_PPCM) >> 16,
|
|
(temp & RH_B_DR)
|
|
);
|
|
temp = roothub_status(controller);
|
|
dbg("roothub.status: %08x%s%s%s%s%s%s",
|
|
temp,
|
|
(temp & RH_HS_CRWE) ? " CRWE" : "",
|
|
(temp & RH_HS_OCIC) ? " OCIC" : "",
|
|
(temp & RH_HS_LPSC) ? " LPSC" : "",
|
|
(temp & RH_HS_DRWE) ? " DRWE" : "",
|
|
(temp & RH_HS_OCI) ? " OCI" : "",
|
|
(temp & RH_HS_LPS) ? " LPS" : ""
|
|
);
|
|
}
|
|
|
|
for (i = 0; i < ndp; i++) {
|
|
temp = roothub_portstatus(controller, i);
|
|
dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
|
|
i,
|
|
temp,
|
|
(temp & RH_PS_PRSC) ? " PRSC" : "",
|
|
(temp & RH_PS_OCIC) ? " OCIC" : "",
|
|
(temp & RH_PS_PSSC) ? " PSSC" : "",
|
|
(temp & RH_PS_PESC) ? " PESC" : "",
|
|
(temp & RH_PS_CSC) ? " CSC" : "",
|
|
|
|
(temp & RH_PS_LSDA) ? " LSDA" : "",
|
|
(temp & RH_PS_PPS) ? " PPS" : "",
|
|
(temp & RH_PS_PRS) ? " PRS" : "",
|
|
(temp & RH_PS_POCI) ? " POCI" : "",
|
|
(temp & RH_PS_PSS) ? " PSS" : "",
|
|
|
|
(temp & RH_PS_PES) ? " PES" : "",
|
|
(temp & RH_PS_CCS) ? " CCS" : ""
|
|
);
|
|
}
|
|
}
|
|
|
|
static void ohci_dump(ohci_t *controller, int verbose)
|
|
{
|
|
dbg("OHCI controller usb-%s state", controller->slot_name);
|
|
|
|
/* dumps some of the state we know about */
|
|
ohci_dump_status(controller);
|
|
if (verbose)
|
|
ep_print_int_eds(controller, "hcca");
|
|
invalidate_dcache_hcca(controller->hcca);
|
|
dbg("hcca frame #%04x", controller->hcca->frame_no);
|
|
ohci_dump_roothub(controller, 1);
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* Interface functions (URB)
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* get a transfer request */
|
|
|
|
int sohci_submit_job(ohci_t *ohci, ohci_dev_t *ohci_dev, urb_priv_t *urb,
|
|
struct devrequest *setup)
|
|
{
|
|
ed_t *ed;
|
|
urb_priv_t *purb_priv = urb;
|
|
int i, size = 0;
|
|
struct usb_device *dev = urb->dev;
|
|
unsigned long pipe = urb->pipe;
|
|
void *buffer = urb->transfer_buffer;
|
|
int transfer_len = urb->transfer_buffer_length;
|
|
int interval = urb->interval;
|
|
|
|
/* when controller's hung, permit only roothub cleanup attempts
|
|
* such as powering down ports */
|
|
if (ohci->disabled) {
|
|
err("sohci_submit_job: EPIPE");
|
|
return -1;
|
|
}
|
|
|
|
/* we're about to begin a new transaction here so mark the
|
|
* URB unfinished */
|
|
urb->finished = 0;
|
|
|
|
/* every endpoint has a ed, locate and fill it */
|
|
ed = ep_add_ed(ohci_dev, dev, pipe, interval, 1);
|
|
if (!ed) {
|
|
err("sohci_submit_job: ENOMEM");
|
|
return -1;
|
|
}
|
|
|
|
/* for the private part of the URB we need the number of TDs (size) */
|
|
switch (usb_pipetype(pipe)) {
|
|
case PIPE_BULK: /* one TD for every 4096 Byte */
|
|
size = (transfer_len - 1) / 4096 + 1;
|
|
break;
|
|
case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
|
|
size = (transfer_len == 0)? 2:
|
|
(transfer_len - 1) / 4096 + 3;
|
|
break;
|
|
case PIPE_INTERRUPT: /* 1 TD */
|
|
size = 1;
|
|
break;
|
|
}
|
|
|
|
ed->purb = urb;
|
|
|
|
if (size >= (N_URB_TD - 1)) {
|
|
err("need %d TDs, only have %d", size, N_URB_TD);
|
|
return -1;
|
|
}
|
|
purb_priv->pipe = pipe;
|
|
|
|
/* fill the private part of the URB */
|
|
purb_priv->length = size;
|
|
purb_priv->ed = ed;
|
|
purb_priv->actual_length = 0;
|
|
|
|
/* allocate the TDs */
|
|
/* note that td[0] was allocated in ep_add_ed */
|
|
for (i = 0; i < size; i++) {
|
|
purb_priv->td[i] = td_alloc(ohci_dev, dev);
|
|
if (!purb_priv->td[i]) {
|
|
purb_priv->length = i;
|
|
urb_free_priv(purb_priv);
|
|
err("sohci_submit_job: ENOMEM");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
|
|
urb_free_priv(purb_priv);
|
|
err("sohci_submit_job: EINVAL");
|
|
return -1;
|
|
}
|
|
|
|
/* link the ed into a chain if is not already */
|
|
if (ed->state != ED_OPER)
|
|
ep_link(ohci, ed);
|
|
|
|
/* fill the TDs and link it to the ed */
|
|
td_submit_job(ohci, dev, pipe, buffer, transfer_len,
|
|
setup, purb_priv, interval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef DEBUG
|
|
/* tell us the current USB frame number */
|
|
static int sohci_get_current_frame_number(ohci_t *ohci)
|
|
{
|
|
invalidate_dcache_hcca(ohci->hcca);
|
|
return m16_swap(ohci->hcca->frame_no);
|
|
}
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* ED handling functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* search for the right branch to insert an interrupt ed into the int tree
|
|
* do some load ballancing;
|
|
* returns the branch and
|
|
* sets the interval to interval = 2^integer (ld (interval)) */
|
|
|
|
static int ep_int_ballance(ohci_t *ohci, int interval, int load)
|
|
{
|
|
int i, branch = 0;
|
|
|
|
/* search for the least loaded interrupt endpoint
|
|
* branch of all 32 branches
|
|
*/
|
|
for (i = 0; i < 32; i++)
|
|
if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i])
|
|
branch = i;
|
|
|
|
branch = branch % interval;
|
|
for (i = branch; i < 32; i += interval)
|
|
ohci->ohci_int_load [i] += load;
|
|
|
|
return branch;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* 2^int( ld (inter)) */
|
|
|
|
static int ep_2_n_interval(int inter)
|
|
{
|
|
int i;
|
|
for (i = 0; ((inter >> i) > 1) && (i < 5); i++);
|
|
return 1 << i;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* the int tree is a binary tree
|
|
* in order to process it sequentially the indexes of the branches have to
|
|
* be mapped the mapping reverses the bits of a word of num_bits length */
|
|
static int ep_rev(int num_bits, int word)
|
|
{
|
|
int i, wout = 0;
|
|
|
|
for (i = 0; i < num_bits; i++)
|
|
wout |= (((word >> i) & 1) << (num_bits - i - 1));
|
|
return wout;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* ED handling functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* link an ed into one of the HC chains */
|
|
|
|
static int ep_link(ohci_t *ohci, ed_t *edi)
|
|
{
|
|
volatile ed_t *ed = edi;
|
|
int int_branch;
|
|
int i;
|
|
int inter;
|
|
int interval;
|
|
int load;
|
|
__u32 *ed_p;
|
|
|
|
ed->state = ED_OPER;
|
|
ed->int_interval = 0;
|
|
|
|
switch (ed->type) {
|
|
case PIPE_CONTROL:
|
|
ed->hwNextED = 0;
|
|
flush_dcache_ed(ed);
|
|
if (ohci->ed_controltail == NULL)
|
|
ohci_writel((uintptr_t)ed, &ohci->regs->ed_controlhead);
|
|
else
|
|
ohci->ed_controltail->hwNextED =
|
|
m32_swap((unsigned long)ed);
|
|
|
|
ed->ed_prev = ohci->ed_controltail;
|
|
if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
|
|
!ohci->ed_rm_list[1] && !ohci->sleeping) {
|
|
ohci->hc_control |= OHCI_CTRL_CLE;
|
|
ohci_writel(ohci->hc_control, &ohci->regs->control);
|
|
}
|
|
ohci->ed_controltail = edi;
|
|
break;
|
|
|
|
case PIPE_BULK:
|
|
ed->hwNextED = 0;
|
|
flush_dcache_ed(ed);
|
|
if (ohci->ed_bulktail == NULL)
|
|
ohci_writel((uintptr_t)ed, &ohci->regs->ed_bulkhead);
|
|
else
|
|
ohci->ed_bulktail->hwNextED =
|
|
m32_swap((unsigned long)ed);
|
|
|
|
ed->ed_prev = ohci->ed_bulktail;
|
|
if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
|
|
!ohci->ed_rm_list[1] && !ohci->sleeping) {
|
|
ohci->hc_control |= OHCI_CTRL_BLE;
|
|
ohci_writel(ohci->hc_control, &ohci->regs->control);
|
|
}
|
|
ohci->ed_bulktail = edi;
|
|
break;
|
|
|
|
case PIPE_INTERRUPT:
|
|
load = ed->int_load;
|
|
interval = ep_2_n_interval(ed->int_period);
|
|
ed->int_interval = interval;
|
|
int_branch = ep_int_ballance(ohci, interval, load);
|
|
ed->int_branch = int_branch;
|
|
|
|
for (i = 0; i < ep_rev(6, interval); i += inter) {
|
|
inter = 1;
|
|
for (ed_p = &(ohci->hcca->int_table[\
|
|
ep_rev(5, i) + int_branch]);
|
|
(*ed_p != 0) &&
|
|
(((ed_t *)ed_p)->int_interval >= interval);
|
|
ed_p = &(((ed_t *)ed_p)->hwNextED))
|
|
inter = ep_rev(6,
|
|
((ed_t *)ed_p)->int_interval);
|
|
ed->hwNextED = *ed_p;
|
|
flush_dcache_ed(ed);
|
|
*ed_p = m32_swap((unsigned long)ed);
|
|
flush_dcache_hcca(ohci->hcca);
|
|
}
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* scan the periodic table to find and unlink this ED */
|
|
static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed,
|
|
unsigned index, unsigned period)
|
|
{
|
|
__maybe_unused unsigned long aligned_ed_p;
|
|
|
|
for (; index < NUM_INTS; index += period) {
|
|
__u32 *ed_p = &ohci->hcca->int_table [index];
|
|
|
|
/* ED might have been unlinked through another path */
|
|
while (*ed_p != 0) {
|
|
if (((struct ed *)(uintptr_t)
|
|
m32_swap((unsigned long)ed_p)) == ed) {
|
|
*ed_p = ed->hwNextED;
|
|
aligned_ed_p = (unsigned long)ed_p;
|
|
aligned_ed_p &= ~(ARCH_DMA_MINALIGN - 1);
|
|
flush_dcache_range(aligned_ed_p,
|
|
aligned_ed_p + ARCH_DMA_MINALIGN);
|
|
break;
|
|
}
|
|
ed_p = &(((struct ed *)(uintptr_t)
|
|
m32_swap((unsigned long)ed_p))->hwNextED);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* unlink an ed from one of the HC chains.
|
|
* just the link to the ed is unlinked.
|
|
* the link from the ed still points to another operational ed or 0
|
|
* so the HC can eventually finish the processing of the unlinked ed */
|
|
|
|
static int ep_unlink(ohci_t *ohci, ed_t *edi)
|
|
{
|
|
volatile ed_t *ed = edi;
|
|
int i;
|
|
|
|
ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
|
|
flush_dcache_ed(ed);
|
|
|
|
switch (ed->type) {
|
|
case PIPE_CONTROL:
|
|
if (ed->ed_prev == NULL) {
|
|
if (!ed->hwNextED) {
|
|
ohci->hc_control &= ~OHCI_CTRL_CLE;
|
|
ohci_writel(ohci->hc_control,
|
|
&ohci->regs->control);
|
|
}
|
|
ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
|
|
&ohci->regs->ed_controlhead);
|
|
} else {
|
|
ed->ed_prev->hwNextED = ed->hwNextED;
|
|
flush_dcache_ed(ed->ed_prev);
|
|
}
|
|
if (ohci->ed_controltail == ed) {
|
|
ohci->ed_controltail = ed->ed_prev;
|
|
} else {
|
|
((ed_t *)(uintptr_t)m32_swap(
|
|
*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
|
|
}
|
|
break;
|
|
|
|
case PIPE_BULK:
|
|
if (ed->ed_prev == NULL) {
|
|
if (!ed->hwNextED) {
|
|
ohci->hc_control &= ~OHCI_CTRL_BLE;
|
|
ohci_writel(ohci->hc_control,
|
|
&ohci->regs->control);
|
|
}
|
|
ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
|
|
&ohci->regs->ed_bulkhead);
|
|
} else {
|
|
ed->ed_prev->hwNextED = ed->hwNextED;
|
|
flush_dcache_ed(ed->ed_prev);
|
|
}
|
|
if (ohci->ed_bulktail == ed) {
|
|
ohci->ed_bulktail = ed->ed_prev;
|
|
} else {
|
|
((ed_t *)(uintptr_t)m32_swap(
|
|
*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
|
|
}
|
|
break;
|
|
|
|
case PIPE_INTERRUPT:
|
|
periodic_unlink(ohci, ed, 0, 1);
|
|
for (i = ed->int_branch; i < 32; i += ed->int_interval)
|
|
ohci->ohci_int_load[i] -= ed->int_load;
|
|
break;
|
|
}
|
|
ed->state = ED_UNLINK;
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* add/reinit an endpoint; this should be done once at the
|
|
* usb_set_configuration command, but the USB stack is a little bit
|
|
* stateless so we do it at every transaction if the state of the ed
|
|
* is ED_NEW then a dummy td is added and the state is changed to
|
|
* ED_UNLINK in all other cases the state is left unchanged the ed
|
|
* info fields are setted anyway even though most of them should not
|
|
* change
|
|
*/
|
|
static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev,
|
|
unsigned long pipe, int interval, int load)
|
|
{
|
|
td_t *td;
|
|
ed_t *ed_ret;
|
|
volatile ed_t *ed;
|
|
|
|
ed = ed_ret = &ohci_dev->ed[(usb_pipeendpoint(pipe) << 1) |
|
|
(usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))];
|
|
|
|
if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
|
|
err("ep_add_ed: pending delete");
|
|
/* pending delete request */
|
|
return NULL;
|
|
}
|
|
|
|
if (ed->state == ED_NEW) {
|
|
/* dummy td; end of td list for ed */
|
|
td = td_alloc(ohci_dev, usb_dev);
|
|
ed->hwTailP = m32_swap((unsigned long)td);
|
|
ed->hwHeadP = ed->hwTailP;
|
|
ed->state = ED_UNLINK;
|
|
ed->type = usb_pipetype(pipe);
|
|
ohci_dev->ed_cnt++;
|
|
}
|
|
|
|
ed->hwINFO = m32_swap(usb_pipedevice(pipe)
|
|
| usb_pipeendpoint(pipe) << 7
|
|
| (usb_pipeisoc(pipe)? 0x8000: 0)
|
|
| (usb_pipecontrol(pipe)? 0: \
|
|
(usb_pipeout(pipe)? 0x800: 0x1000))
|
|
| (usb_dev->speed == USB_SPEED_LOW) << 13
|
|
| usb_maxpacket(usb_dev, pipe) << 16);
|
|
|
|
if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
|
|
ed->int_period = interval;
|
|
ed->int_load = load;
|
|
}
|
|
|
|
flush_dcache_ed(ed);
|
|
|
|
return ed_ret;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* TD handling functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
|
|
|
|
static void td_fill(ohci_t *ohci, unsigned int info,
|
|
void *data, int len,
|
|
struct usb_device *dev, int index, urb_priv_t *urb_priv)
|
|
{
|
|
volatile td_t *td, *td_pt;
|
|
#ifdef OHCI_FILL_TRACE
|
|
int i;
|
|
#endif
|
|
|
|
if (index > urb_priv->length) {
|
|
err("index > length");
|
|
return;
|
|
}
|
|
/* use this td as the next dummy */
|
|
td_pt = urb_priv->td [index];
|
|
td_pt->hwNextTD = 0;
|
|
flush_dcache_td(td_pt);
|
|
|
|
/* fill the old dummy TD */
|
|
td = urb_priv->td [index] =
|
|
(td_t *)(uintptr_t)
|
|
(m32_swap(urb_priv->ed->hwTailP) & ~0xf);
|
|
|
|
td->ed = urb_priv->ed;
|
|
td->next_dl_td = NULL;
|
|
td->index = index;
|
|
td->data = (uintptr_t)data;
|
|
#ifdef OHCI_FILL_TRACE
|
|
if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
|
|
for (i = 0; i < len; i++)
|
|
printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
if (!len)
|
|
data = 0;
|
|
|
|
td->hwINFO = m32_swap(info);
|
|
td->hwCBP = m32_swap((unsigned long)data);
|
|
if (data)
|
|
td->hwBE = m32_swap((unsigned long)(data + len - 1));
|
|
else
|
|
td->hwBE = 0;
|
|
|
|
td->hwNextTD = m32_swap((unsigned long)td_pt);
|
|
flush_dcache_td(td);
|
|
|
|
/* append to queue */
|
|
td->ed->hwTailP = td->hwNextTD;
|
|
flush_dcache_ed(td->ed);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* prepare all TDs of a transfer */
|
|
|
|
static void td_submit_job(ohci_t *ohci, struct usb_device *dev,
|
|
unsigned long pipe, void *buffer, int transfer_len,
|
|
struct devrequest *setup, urb_priv_t *urb,
|
|
int interval)
|
|
{
|
|
int data_len = transfer_len;
|
|
void *data;
|
|
int cnt = 0;
|
|
__u32 info = 0;
|
|
unsigned int toggle = 0;
|
|
|
|
flush_dcache_buffer(buffer, data_len);
|
|
|
|
/* OHCI handles the DATA-toggles itself, we just use the USB-toggle
|
|
* bits for resetting */
|
|
if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
|
|
toggle = TD_T_TOGGLE;
|
|
} else {
|
|
toggle = TD_T_DATA0;
|
|
usb_settoggle(dev, usb_pipeendpoint(pipe),
|
|
usb_pipeout(pipe), 1);
|
|
}
|
|
urb->td_cnt = 0;
|
|
if (data_len)
|
|
data = buffer;
|
|
else
|
|
data = 0;
|
|
|
|
switch (usb_pipetype(pipe)) {
|
|
case PIPE_BULK:
|
|
info = usb_pipeout(pipe)?
|
|
TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
|
|
while (data_len > 4096) {
|
|
td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle),
|
|
data, 4096, dev, cnt, urb);
|
|
data += 4096; data_len -= 4096; cnt++;
|
|
}
|
|
info = usb_pipeout(pipe)?
|
|
TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
|
|
td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data,
|
|
data_len, dev, cnt, urb);
|
|
cnt++;
|
|
|
|
if (!ohci->sleeping) {
|
|
/* start bulk list */
|
|
ohci_writel(OHCI_BLF, &ohci->regs->cmdstatus);
|
|
}
|
|
break;
|
|
|
|
case PIPE_CONTROL:
|
|
/* Setup phase */
|
|
info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
|
|
flush_dcache_buffer(setup, 8);
|
|
td_fill(ohci, info, setup, 8, dev, cnt++, urb);
|
|
|
|
/* Optional Data phase */
|
|
if (data_len > 0) {
|
|
info = usb_pipeout(pipe)?
|
|
TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
|
|
TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
|
|
/* NOTE: mishandles transfers >8K, some >4K */
|
|
td_fill(ohci, info, data, data_len, dev, cnt++, urb);
|
|
}
|
|
|
|
/* Status phase */
|
|
info = (usb_pipeout(pipe) || data_len == 0) ?
|
|
TD_CC | TD_DP_IN | TD_T_DATA1:
|
|
TD_CC | TD_DP_OUT | TD_T_DATA1;
|
|
td_fill(ohci, info, data, 0, dev, cnt++, urb);
|
|
|
|
if (!ohci->sleeping) {
|
|
/* start Control list */
|
|
ohci_writel(OHCI_CLF, &ohci->regs->cmdstatus);
|
|
}
|
|
break;
|
|
|
|
case PIPE_INTERRUPT:
|
|
info = usb_pipeout(urb->pipe)?
|
|
TD_CC | TD_DP_OUT | toggle:
|
|
TD_CC | TD_R | TD_DP_IN | toggle;
|
|
td_fill(ohci, info, data, data_len, dev, cnt++, urb);
|
|
break;
|
|
}
|
|
if (urb->length != cnt)
|
|
dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* Done List handling functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* calculate the transfer length and update the urb */
|
|
|
|
static void dl_transfer_length(td_t *td)
|
|
{
|
|
__u32 tdBE, tdCBP;
|
|
urb_priv_t *lurb_priv = td->ed->purb;
|
|
|
|
tdBE = m32_swap(td->hwBE);
|
|
tdCBP = m32_swap(td->hwCBP);
|
|
|
|
if (!(usb_pipecontrol(lurb_priv->pipe) &&
|
|
((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
|
|
if (tdBE != 0) {
|
|
if (td->hwCBP == 0)
|
|
lurb_priv->actual_length += tdBE - td->data + 1;
|
|
else
|
|
lurb_priv->actual_length += tdCBP - td->data;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
static void check_status(td_t *td_list)
|
|
{
|
|
urb_priv_t *lurb_priv = td_list->ed->purb;
|
|
int urb_len = lurb_priv->length;
|
|
__u32 *phwHeadP = &td_list->ed->hwHeadP;
|
|
int cc;
|
|
|
|
cc = TD_CC_GET(m32_swap(td_list->hwINFO));
|
|
if (cc) {
|
|
err(" USB-error: %s (%x)", cc_to_string[cc], cc);
|
|
|
|
invalidate_dcache_ed(td_list->ed);
|
|
if (*phwHeadP & m32_swap(0x1)) {
|
|
if (lurb_priv &&
|
|
((td_list->index + 1) < urb_len)) {
|
|
*phwHeadP =
|
|
(lurb_priv->td[urb_len - 1]->hwNextTD &\
|
|
m32_swap(0xfffffff0)) |
|
|
(*phwHeadP & m32_swap(0x2));
|
|
|
|
lurb_priv->td_cnt += urb_len -
|
|
td_list->index - 1;
|
|
} else
|
|
*phwHeadP &= m32_swap(0xfffffff2);
|
|
flush_dcache_ed(td_list->ed);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* replies to the request have to be on a FIFO basis so
|
|
* we reverse the reversed done-list */
|
|
static td_t *dl_reverse_done_list(ohci_t *ohci)
|
|
{
|
|
uintptr_t td_list_hc;
|
|
td_t *td_rev = NULL;
|
|
td_t *td_list = NULL;
|
|
|
|
invalidate_dcache_hcca(ohci->hcca);
|
|
td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
|
|
ohci->hcca->done_head = 0;
|
|
flush_dcache_hcca(ohci->hcca);
|
|
|
|
while (td_list_hc) {
|
|
td_list = (td_t *)td_list_hc;
|
|
invalidate_dcache_td(td_list);
|
|
check_status(td_list);
|
|
td_list->next_dl_td = td_rev;
|
|
td_rev = td_list;
|
|
td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
|
|
}
|
|
return td_list;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status)
|
|
{
|
|
if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL))
|
|
urb->finished = 1;
|
|
else
|
|
dbg("finish_urb: strange.., ED state %x, \n", status);
|
|
}
|
|
|
|
/*
|
|
* Used to take back a TD from the host controller. This would normally be
|
|
* called from within dl_done_list, however it may be called directly if the
|
|
* HC no longer sees the TD and it has not appeared on the donelist (after
|
|
* two frames). This bug has been observed on ZF Micro systems.
|
|
*/
|
|
static int takeback_td(ohci_t *ohci, td_t *td_list)
|
|
{
|
|
ed_t *ed;
|
|
int cc;
|
|
int stat = 0;
|
|
/* urb_t *urb; */
|
|
urb_priv_t *lurb_priv;
|
|
__u32 tdINFO, edHeadP, edTailP;
|
|
|
|
invalidate_dcache_td(td_list);
|
|
tdINFO = m32_swap(td_list->hwINFO);
|
|
|
|
ed = td_list->ed;
|
|
lurb_priv = ed->purb;
|
|
|
|
dl_transfer_length(td_list);
|
|
|
|
lurb_priv->td_cnt++;
|
|
|
|
/* error code of transfer */
|
|
cc = TD_CC_GET(tdINFO);
|
|
if (cc) {
|
|
err("USB-error: %s (%x)", cc_to_string[cc], cc);
|
|
stat = cc_to_error[cc];
|
|
}
|
|
|
|
/* see if this done list makes for all TD's of current URB,
|
|
* and mark the URB finished if so */
|
|
if (lurb_priv->td_cnt == lurb_priv->length)
|
|
finish_urb(ohci, lurb_priv, ed->state);
|
|
|
|
dbg("dl_done_list: processing TD %x, len %x\n",
|
|
lurb_priv->td_cnt, lurb_priv->length);
|
|
|
|
if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) {
|
|
invalidate_dcache_ed(ed);
|
|
edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
|
|
edTailP = m32_swap(ed->hwTailP);
|
|
|
|
/* unlink eds if they are not busy */
|
|
if ((edHeadP == edTailP) && (ed->state == ED_OPER))
|
|
ep_unlink(ohci, ed);
|
|
}
|
|
return stat;
|
|
}
|
|
|
|
static int dl_done_list(ohci_t *ohci)
|
|
{
|
|
int stat = 0;
|
|
td_t *td_list = dl_reverse_done_list(ohci);
|
|
|
|
while (td_list) {
|
|
td_t *td_next = td_list->next_dl_td;
|
|
stat = takeback_td(ohci, td_list);
|
|
td_list = td_next;
|
|
}
|
|
return stat;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* Virtual Root Hub
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
#include <usbroothubdes.h>
|
|
|
|
/* Hub class-specific descriptor is constructed dynamically */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define OK(x) len = (x); break
|
|
#ifdef DEBUG
|
|
#define WR_RH_STAT(x) {info("WR:status %#8x", (x)); ohci_writel((x), \
|
|
&ohci->regs->roothub.status); }
|
|
#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \
|
|
(x)); ohci_writel((x), &ohci->regs->roothub.portstatus[wIndex-1]); }
|
|
#else
|
|
#define WR_RH_STAT(x) ohci_writel((x), &ohci->regs->roothub.status)
|
|
#define WR_RH_PORTSTAT(x) ohci_writel((x), \
|
|
&ohci->regs->roothub.portstatus[wIndex-1])
|
|
#endif
|
|
#define RD_RH_STAT roothub_status(ohci)
|
|
#define RD_RH_PORTSTAT roothub_portstatus(ohci, wIndex-1)
|
|
|
|
/* request to virtual root hub */
|
|
|
|
int rh_check_port_status(ohci_t *controller)
|
|
{
|
|
__u32 temp, ndp, i;
|
|
int res;
|
|
|
|
res = -1;
|
|
temp = roothub_a(controller);
|
|
ndp = (temp & RH_A_NDP);
|
|
#ifdef CONFIG_AT91C_PQFP_UHPBUG
|
|
ndp = (ndp == 2) ? 1:0;
|
|
#endif
|
|
for (i = 0; i < ndp; i++) {
|
|
temp = roothub_portstatus(controller, i);
|
|
/* check for a device disconnect */
|
|
if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
|
|
(RH_PS_PESC | RH_PS_CSC)) &&
|
|
((temp & RH_PS_CCS) == 0)) {
|
|
res = i;
|
|
break;
|
|
}
|
|
}
|
|
return res;
|
|
}
|
|
|
|
static int ohci_submit_rh_msg(ohci_t *ohci, struct usb_device *dev,
|
|
unsigned long pipe, void *buffer, int transfer_len,
|
|
struct devrequest *cmd)
|
|
{
|
|
void *data = buffer;
|
|
int leni = transfer_len;
|
|
int len = 0;
|
|
int stat = 0;
|
|
__u16 bmRType_bReq;
|
|
__u16 wValue;
|
|
__u16 wIndex;
|
|
__u16 wLength;
|
|
ALLOC_ALIGN_BUFFER(__u8, databuf, 16, sizeof(u32));
|
|
|
|
#ifdef DEBUG
|
|
pkt_print(ohci, NULL, dev, pipe, buffer, transfer_len,
|
|
cmd, "SUB(rh)", usb_pipein(pipe));
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
if (usb_pipeint(pipe)) {
|
|
info("Root-Hub submit IRQ: NOT implemented");
|
|
return 0;
|
|
}
|
|
|
|
bmRType_bReq = cmd->requesttype | (cmd->request << 8);
|
|
wValue = le16_to_cpu(cmd->value);
|
|
wIndex = le16_to_cpu(cmd->index);
|
|
wLength = le16_to_cpu(cmd->length);
|
|
|
|
info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
|
|
dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
|
|
|
|
switch (bmRType_bReq) {
|
|
/* Request Destination:
|
|
without flags: Device,
|
|
RH_INTERFACE: interface,
|
|
RH_ENDPOINT: endpoint,
|
|
RH_CLASS means HUB here,
|
|
RH_OTHER | RH_CLASS almost ever means HUB_PORT here
|
|
*/
|
|
|
|
case RH_GET_STATUS:
|
|
*(u16 *)databuf = cpu_to_le16(1);
|
|
OK(2);
|
|
case RH_GET_STATUS | RH_INTERFACE:
|
|
*(u16 *)databuf = cpu_to_le16(0);
|
|
OK(2);
|
|
case RH_GET_STATUS | RH_ENDPOINT:
|
|
*(u16 *)databuf = cpu_to_le16(0);
|
|
OK(2);
|
|
case RH_GET_STATUS | RH_CLASS:
|
|
*(u32 *)databuf = cpu_to_le32(
|
|
RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
|
|
OK(4);
|
|
case RH_GET_STATUS | RH_OTHER | RH_CLASS:
|
|
*(u32 *)databuf = cpu_to_le32(RD_RH_PORTSTAT);
|
|
OK(4);
|
|
|
|
case RH_CLEAR_FEATURE | RH_ENDPOINT:
|
|
switch (wValue) {
|
|
case (RH_ENDPOINT_STALL):
|
|
OK(0);
|
|
}
|
|
break;
|
|
|
|
case RH_CLEAR_FEATURE | RH_CLASS:
|
|
switch (wValue) {
|
|
case RH_C_HUB_LOCAL_POWER:
|
|
OK(0);
|
|
case (RH_C_HUB_OVER_CURRENT):
|
|
WR_RH_STAT(RH_HS_OCIC);
|
|
OK(0);
|
|
}
|
|
break;
|
|
|
|
case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
|
|
switch (wValue) {
|
|
case (RH_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_CCS); OK(0);
|
|
case (RH_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_POCI); OK(0);
|
|
case (RH_PORT_POWER): WR_RH_PORTSTAT(RH_PS_LSDA); OK(0);
|
|
case (RH_C_PORT_CONNECTION): WR_RH_PORTSTAT(RH_PS_CSC); OK(0);
|
|
case (RH_C_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_PESC); OK(0);
|
|
case (RH_C_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_PSSC); OK(0);
|
|
case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0);
|
|
case (RH_C_PORT_RESET): WR_RH_PORTSTAT(RH_PS_PRSC); OK(0);
|
|
}
|
|
break;
|
|
|
|
case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
|
|
switch (wValue) {
|
|
case (RH_PORT_SUSPEND):
|
|
WR_RH_PORTSTAT(RH_PS_PSS); OK(0);
|
|
case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
|
|
if (RD_RH_PORTSTAT & RH_PS_CCS)
|
|
WR_RH_PORTSTAT(RH_PS_PRS);
|
|
OK(0);
|
|
case (RH_PORT_POWER):
|
|
WR_RH_PORTSTAT(RH_PS_PPS);
|
|
OK(0);
|
|
case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
|
|
if (RD_RH_PORTSTAT & RH_PS_CCS)
|
|
WR_RH_PORTSTAT(RH_PS_PES);
|
|
OK(0);
|
|
}
|
|
break;
|
|
|
|
case RH_SET_ADDRESS:
|
|
ohci->rh.devnum = wValue;
|
|
OK(0);
|
|
|
|
case RH_GET_DESCRIPTOR:
|
|
switch ((wValue & 0xff00) >> 8) {
|
|
case (0x01): /* device descriptor */
|
|
len = min_t(unsigned int,
|
|
leni,
|
|
min_t(unsigned int,
|
|
sizeof(root_hub_dev_des),
|
|
wLength));
|
|
databuf = root_hub_dev_des; OK(len);
|
|
case (0x02): /* configuration descriptor */
|
|
len = min_t(unsigned int,
|
|
leni,
|
|
min_t(unsigned int,
|
|
sizeof(root_hub_config_des),
|
|
wLength));
|
|
databuf = root_hub_config_des; OK(len);
|
|
case (0x03): /* string descriptors */
|
|
if (wValue == 0x0300) {
|
|
len = min_t(unsigned int,
|
|
leni,
|
|
min_t(unsigned int,
|
|
sizeof(root_hub_str_index0),
|
|
wLength));
|
|
databuf = root_hub_str_index0;
|
|
OK(len);
|
|
}
|
|
if (wValue == 0x0301) {
|
|
len = min_t(unsigned int,
|
|
leni,
|
|
min_t(unsigned int,
|
|
sizeof(root_hub_str_index1),
|
|
wLength));
|
|
databuf = root_hub_str_index1;
|
|
OK(len);
|
|
}
|
|
default:
|
|
stat = USB_ST_STALLED;
|
|
}
|
|
break;
|
|
|
|
case RH_GET_DESCRIPTOR | RH_CLASS:
|
|
{
|
|
__u32 temp = roothub_a(ohci);
|
|
|
|
databuf[0] = 9; /* min length; */
|
|
databuf[1] = 0x29;
|
|
databuf[2] = temp & RH_A_NDP;
|
|
#ifdef CONFIG_AT91C_PQFP_UHPBUG
|
|
databuf[2] = (databuf[2] == 2) ? 1 : 0;
|
|
#endif
|
|
databuf[3] = 0;
|
|
if (temp & RH_A_PSM) /* per-port power switching? */
|
|
databuf[3] |= 0x1;
|
|
if (temp & RH_A_NOCP) /* no overcurrent reporting? */
|
|
databuf[3] |= 0x10;
|
|
else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */
|
|
databuf[3] |= 0x8;
|
|
|
|
databuf[4] = 0;
|
|
databuf[5] = (temp & RH_A_POTPGT) >> 24;
|
|
databuf[6] = 0;
|
|
temp = roothub_b(ohci);
|
|
databuf[7] = temp & RH_B_DR;
|
|
if (databuf[2] < 7) {
|
|
databuf[8] = 0xff;
|
|
} else {
|
|
databuf[0] += 2;
|
|
databuf[8] = (temp & RH_B_DR) >> 8;
|
|
databuf[10] = databuf[9] = 0xff;
|
|
}
|
|
|
|
len = min_t(unsigned int, leni,
|
|
min_t(unsigned int, databuf[0], wLength));
|
|
OK(len);
|
|
}
|
|
|
|
case RH_GET_CONFIGURATION:
|
|
databuf[0] = 0x01;
|
|
OK(1);
|
|
|
|
case RH_SET_CONFIGURATION:
|
|
WR_RH_STAT(0x10000);
|
|
OK(0);
|
|
|
|
default:
|
|
dbg("unsupported root hub command");
|
|
stat = USB_ST_STALLED;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
ohci_dump_roothub(ohci, 1);
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
|
|
len = min_t(int, len, leni);
|
|
if (data != databuf)
|
|
memcpy(data, databuf, len);
|
|
dev->act_len = len;
|
|
dev->status = stat;
|
|
|
|
#ifdef DEBUG
|
|
pkt_print(ohci, NULL, dev, pipe, buffer,
|
|
transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
|
|
return stat;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static ohci_dev_t *ohci_get_ohci_dev(ohci_t *ohci, int devnum, int intr)
|
|
{
|
|
int i;
|
|
|
|
if (!intr)
|
|
return &ohci->ohci_dev;
|
|
|
|
/* First see if we already have an ohci_dev for this dev. */
|
|
for (i = 0; i < NUM_INT_DEVS; i++) {
|
|
if (ohci->int_dev[i].devnum == devnum)
|
|
return &ohci->int_dev[i];
|
|
}
|
|
|
|
/* If not then find a free one. */
|
|
for (i = 0; i < NUM_INT_DEVS; i++) {
|
|
if (ohci->int_dev[i].devnum == -1) {
|
|
ohci->int_dev[i].devnum = devnum;
|
|
return &ohci->int_dev[i];
|
|
}
|
|
}
|
|
|
|
printf("ohci: Error out of ohci_devs for interrupt endpoints\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* common code for handling submit messages - used for all but root hub */
|
|
/* accesses. */
|
|
static urb_priv_t *ohci_alloc_urb(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int transfer_len, int interval)
|
|
{
|
|
urb_priv_t *urb;
|
|
|
|
urb = calloc(1, sizeof(urb_priv_t));
|
|
if (!urb) {
|
|
printf("ohci: Error out of memory allocating urb\n");
|
|
return NULL;
|
|
}
|
|
|
|
urb->dev = dev;
|
|
urb->pipe = pipe;
|
|
urb->transfer_buffer = buffer;
|
|
urb->transfer_buffer_length = transfer_len;
|
|
urb->interval = interval;
|
|
|
|
return urb;
|
|
}
|
|
|
|
static int submit_common_msg(ohci_t *ohci, struct usb_device *dev,
|
|
unsigned long pipe, void *buffer, int transfer_len,
|
|
struct devrequest *setup, int interval)
|
|
{
|
|
int stat = 0;
|
|
int maxsize = usb_maxpacket(dev, pipe);
|
|
int timeout;
|
|
urb_priv_t *urb;
|
|
ohci_dev_t *ohci_dev;
|
|
|
|
urb = ohci_alloc_urb(dev, pipe, buffer, transfer_len, interval);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
#ifdef DEBUG
|
|
urb->actual_length = 0;
|
|
pkt_print(ohci, urb, dev, pipe, buffer, transfer_len,
|
|
setup, "SUB", usb_pipein(pipe));
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
if (!maxsize) {
|
|
err("submit_common_message: pipesize for pipe %lx is zero",
|
|
pipe);
|
|
return -1;
|
|
}
|
|
|
|
ohci_dev = ohci_get_ohci_dev(ohci, dev->devnum, usb_pipeint(pipe));
|
|
if (!ohci_dev)
|
|
return -ENOMEM;
|
|
|
|
if (sohci_submit_job(ohci, ohci_dev, urb, setup) < 0) {
|
|
err("sohci_submit_job failed");
|
|
return -1;
|
|
}
|
|
|
|
mdelay(10);
|
|
/* ohci_dump_status(ohci); */
|
|
|
|
timeout = USB_TIMEOUT_MS(pipe);
|
|
|
|
/* wait for it to complete */
|
|
for (;;) {
|
|
/* check whether the controller is done */
|
|
stat = hc_interrupt(ohci);
|
|
if (stat < 0) {
|
|
stat = USB_ST_CRC_ERR;
|
|
break;
|
|
}
|
|
|
|
/* NOTE: since we are not interrupt driven in U-Boot and always
|
|
* handle only one URB at a time, we cannot assume the
|
|
* transaction finished on the first successful return from
|
|
* hc_interrupt().. unless the flag for current URB is set,
|
|
* meaning that all TD's to/from device got actually
|
|
* transferred and processed. If the current URB is not
|
|
* finished we need to re-iterate this loop so as
|
|
* hc_interrupt() gets called again as there needs to be some
|
|
* more TD's to process still */
|
|
if ((stat >= 0) && (stat != 0xff) && (urb->finished)) {
|
|
/* 0xff is returned for an SF-interrupt */
|
|
break;
|
|
}
|
|
|
|
if (--timeout) {
|
|
mdelay(1);
|
|
if (!urb->finished)
|
|
dbg("*");
|
|
|
|
} else {
|
|
if (!usb_pipeint(pipe))
|
|
err("CTL:TIMEOUT ");
|
|
dbg("submit_common_msg: TO status %x\n", stat);
|
|
urb->finished = 1;
|
|
stat = USB_ST_CRC_ERR;
|
|
break;
|
|
}
|
|
}
|
|
|
|
dev->status = stat;
|
|
dev->act_len = urb->actual_length;
|
|
|
|
if (usb_pipein(pipe) && dev->status == 0 && dev->act_len)
|
|
invalidate_dcache_buffer(buffer, dev->act_len);
|
|
|
|
#ifdef DEBUG
|
|
pkt_print(ohci, urb, dev, pipe, buffer, transfer_len,
|
|
setup, "RET(ctlr)", usb_pipein(pipe));
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
urb_free_priv(urb);
|
|
return 0;
|
|
}
|
|
|
|
#define MAX_INT_QUEUESIZE 8
|
|
|
|
struct int_queue {
|
|
int queuesize;
|
|
int curr_urb;
|
|
urb_priv_t *urb[MAX_INT_QUEUESIZE];
|
|
};
|
|
|
|
static struct int_queue *_ohci_create_int_queue(ohci_t *ohci,
|
|
struct usb_device *udev, unsigned long pipe, int queuesize,
|
|
int elementsize, void *buffer, int interval)
|
|
{
|
|
struct int_queue *queue;
|
|
ohci_dev_t *ohci_dev;
|
|
int i;
|
|
|
|
if (queuesize > MAX_INT_QUEUESIZE)
|
|
return NULL;
|
|
|
|
ohci_dev = ohci_get_ohci_dev(ohci, udev->devnum, 1);
|
|
if (!ohci_dev)
|
|
return NULL;
|
|
|
|
queue = malloc(sizeof(*queue));
|
|
if (!queue) {
|
|
printf("ohci: Error out of memory allocating int queue\n");
|
|
return NULL;
|
|
}
|
|
|
|
for (i = 0; i < queuesize; i++) {
|
|
queue->urb[i] = ohci_alloc_urb(udev, pipe,
|
|
buffer + i * elementsize,
|
|
elementsize, interval);
|
|
if (!queue->urb[i])
|
|
break;
|
|
|
|
if (sohci_submit_job(ohci, ohci_dev, queue->urb[i], NULL)) {
|
|
printf("ohci: Error submitting int queue job\n");
|
|
urb_free_priv(queue->urb[i]);
|
|
break;
|
|
}
|
|
}
|
|
if (i == 0) {
|
|
/* We did not succeed in submitting even 1 urb */
|
|
free(queue);
|
|
return NULL;
|
|
}
|
|
|
|
queue->queuesize = i;
|
|
queue->curr_urb = 0;
|
|
|
|
return queue;
|
|
}
|
|
|
|
static void *_ohci_poll_int_queue(ohci_t *ohci, struct usb_device *udev,
|
|
struct int_queue *queue)
|
|
{
|
|
if (queue->curr_urb == queue->queuesize)
|
|
return NULL; /* Queue depleted */
|
|
|
|
if (hc_interrupt(ohci) < 0)
|
|
return NULL;
|
|
|
|
if (queue->urb[queue->curr_urb]->finished) {
|
|
void *ret = queue->urb[queue->curr_urb]->transfer_buffer;
|
|
queue->curr_urb++;
|
|
return ret;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int _ohci_destroy_int_queue(ohci_t *ohci, struct usb_device *dev,
|
|
struct int_queue *queue)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < queue->queuesize; i++)
|
|
urb_free_priv(queue->urb[i]);
|
|
|
|
free(queue);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_USB)
|
|
/* submit routines called from usb.c */
|
|
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
|
|
int transfer_len)
|
|
{
|
|
info("submit_bulk_msg");
|
|
return submit_common_msg(&gohci, dev, pipe, buffer, transfer_len,
|
|
NULL, 0);
|
|
}
|
|
|
|
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
|
|
int transfer_len, int interval, bool nonblock)
|
|
{
|
|
info("submit_int_msg");
|
|
return submit_common_msg(&gohci, dev, pipe, buffer, transfer_len, NULL,
|
|
interval);
|
|
}
|
|
|
|
struct int_queue *create_int_queue(struct usb_device *dev,
|
|
unsigned long pipe, int queuesize, int elementsize,
|
|
void *buffer, int interval)
|
|
{
|
|
return _ohci_create_int_queue(&gohci, dev, pipe, queuesize,
|
|
elementsize, buffer, interval);
|
|
}
|
|
|
|
void *poll_int_queue(struct usb_device *dev, struct int_queue *queue)
|
|
{
|
|
return _ohci_poll_int_queue(&gohci, dev, queue);
|
|
}
|
|
|
|
int destroy_int_queue(struct usb_device *dev, struct int_queue *queue)
|
|
{
|
|
return _ohci_destroy_int_queue(&gohci, dev, queue);
|
|
}
|
|
#endif
|
|
|
|
static int _ohci_submit_control_msg(ohci_t *ohci, struct usb_device *dev,
|
|
unsigned long pipe, void *buffer, int transfer_len,
|
|
struct devrequest *setup)
|
|
{
|
|
int maxsize = usb_maxpacket(dev, pipe);
|
|
|
|
info("submit_control_msg");
|
|
#ifdef DEBUG
|
|
pkt_print(ohci, NULL, dev, pipe, buffer, transfer_len,
|
|
setup, "SUB", usb_pipein(pipe));
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
if (!maxsize) {
|
|
err("submit_control_message: pipesize for pipe %lx is zero",
|
|
pipe);
|
|
return -1;
|
|
}
|
|
if (((pipe >> 8) & 0x7f) == ohci->rh.devnum) {
|
|
ohci->rh.dev = dev;
|
|
/* root hub - redirect */
|
|
return ohci_submit_rh_msg(ohci, dev, pipe, buffer,
|
|
transfer_len, setup);
|
|
}
|
|
|
|
return submit_common_msg(ohci, dev, pipe, buffer, transfer_len,
|
|
setup, 0);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* HC functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* reset the HC and BUS */
|
|
|
|
static int hc_reset(ohci_t *ohci)
|
|
{
|
|
#ifdef CONFIG_PCI_EHCI_DEVNO
|
|
pci_dev_t pdev;
|
|
#endif
|
|
int timeout = 30;
|
|
int smm_timeout = 50; /* 0,5 sec */
|
|
|
|
dbg("%s\n", __FUNCTION__);
|
|
|
|
#ifdef CONFIG_PCI_EHCI_DEVNO
|
|
/*
|
|
* Some multi-function controllers (e.g. ISP1562) allow root hub
|
|
* resetting via EHCI registers only.
|
|
*/
|
|
pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO);
|
|
if (pdev != -1) {
|
|
u32 base;
|
|
int timeout = 1000;
|
|
|
|
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
|
|
base += EHCI_USBCMD_OFF;
|
|
ohci_writel(ohci_readl(base) | EHCI_USBCMD_HCRESET, base);
|
|
|
|
while (ohci_readl(base) & EHCI_USBCMD_HCRESET) {
|
|
if (timeout-- <= 0) {
|
|
printf("USB RootHub reset timed out!");
|
|
break;
|
|
}
|
|
udelay(1);
|
|
}
|
|
} else
|
|
printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO);
|
|
#endif
|
|
if (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
|
|
/* SMM owns the HC, request ownership */
|
|
ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus);
|
|
info("USB HC TakeOver from SMM");
|
|
while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
|
|
mdelay(10);
|
|
if (--smm_timeout == 0) {
|
|
err("USB HC TakeOver failed!");
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Disable HC interrupts */
|
|
ohci_writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
|
|
|
|
dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
|
|
ohci->slot_name,
|
|
ohci_readl(&ohci->regs->control));
|
|
|
|
/* Reset USB (needed by some controllers) */
|
|
ohci->hc_control = 0;
|
|
ohci_writel(ohci->hc_control, &ohci->regs->control);
|
|
|
|
/* HC Reset requires max 10 us delay */
|
|
ohci_writel(OHCI_HCR, &ohci->regs->cmdstatus);
|
|
while ((ohci_readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
|
|
if (--timeout == 0) {
|
|
err("USB HC reset timed out!");
|
|
return -1;
|
|
}
|
|
udelay(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Start an OHCI controller, set the BUS operational
|
|
* enable interrupts
|
|
* connect the virtual root hub */
|
|
|
|
static int hc_start(ohci_t *ohci)
|
|
{
|
|
__u32 mask;
|
|
unsigned int fminterval;
|
|
int i;
|
|
|
|
ohci->disabled = 1;
|
|
for (i = 0; i < NUM_INT_DEVS; i++)
|
|
ohci->int_dev[i].devnum = -1;
|
|
|
|
/* Tell the controller where the control and bulk lists are
|
|
* The lists are empty now. */
|
|
|
|
ohci_writel(0, &ohci->regs->ed_controlhead);
|
|
ohci_writel(0, &ohci->regs->ed_bulkhead);
|
|
|
|
ohci_writel((uintptr_t)ohci->hcca,
|
|
&ohci->regs->hcca); /* reset clears this */
|
|
|
|
fminterval = 0x2edf;
|
|
ohci_writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
|
|
fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
|
|
ohci_writel(fminterval, &ohci->regs->fminterval);
|
|
ohci_writel(0x628, &ohci->regs->lsthresh);
|
|
|
|
/* start controller operations */
|
|
ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
|
|
ohci->disabled = 0;
|
|
ohci_writel(ohci->hc_control, &ohci->regs->control);
|
|
|
|
/* disable all interrupts */
|
|
mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
|
|
OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
|
|
OHCI_INTR_OC | OHCI_INTR_MIE);
|
|
ohci_writel(mask, &ohci->regs->intrdisable);
|
|
/* clear all interrupts */
|
|
mask &= ~OHCI_INTR_MIE;
|
|
ohci_writel(mask, &ohci->regs->intrstatus);
|
|
/* Choose the interrupts we care about now - but w/o MIE */
|
|
mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
|
|
ohci_writel(mask, &ohci->regs->intrenable);
|
|
|
|
#ifdef OHCI_USE_NPS
|
|
/* required for AMD-756 and some Mac platforms */
|
|
ohci_writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
|
|
&ohci->regs->roothub.a);
|
|
ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status);
|
|
#endif /* OHCI_USE_NPS */
|
|
|
|
/* connect the virtual root hub */
|
|
ohci->rh.devnum = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* an interrupt happens */
|
|
|
|
static int hc_interrupt(ohci_t *ohci)
|
|
{
|
|
struct ohci_regs *regs = ohci->regs;
|
|
int ints;
|
|
int stat = -1;
|
|
|
|
invalidate_dcache_hcca(ohci->hcca);
|
|
|
|
if ((ohci->hcca->done_head != 0) &&
|
|
!(m32_swap(ohci->hcca->done_head) & 0x01)) {
|
|
ints = OHCI_INTR_WDH;
|
|
} else {
|
|
ints = ohci_readl(®s->intrstatus);
|
|
if (ints == ~(u32)0) {
|
|
ohci->disabled++;
|
|
err("%s device removed!", ohci->slot_name);
|
|
return -1;
|
|
} else {
|
|
ints &= ohci_readl(®s->intrenable);
|
|
if (ints == 0) {
|
|
dbg("hc_interrupt: returning..\n");
|
|
return 0xff;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* dbg("Interrupt: %x frame: %x", ints,
|
|
le16_to_cpu(ohci->hcca->frame_no)); */
|
|
|
|
if (ints & OHCI_INTR_RHSC)
|
|
stat = 0xff;
|
|
|
|
if (ints & OHCI_INTR_UE) {
|
|
ohci->disabled++;
|
|
err("OHCI Unrecoverable Error, controller usb-%s disabled",
|
|
ohci->slot_name);
|
|
/* e.g. due to PCI Master/Target Abort */
|
|
|
|
#ifdef DEBUG
|
|
ohci_dump(ohci, 1);
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
/* FIXME: be optimistic, hope that bug won't repeat often. */
|
|
/* Make some non-interrupt context restart the controller. */
|
|
/* Count and limit the retries though; either hardware or */
|
|
/* software errors can go forever... */
|
|
hc_reset(ohci);
|
|
return -1;
|
|
}
|
|
|
|
if (ints & OHCI_INTR_WDH) {
|
|
ohci_mdelay(1);
|
|
ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
|
|
(void)ohci_readl(®s->intrdisable); /* flush */
|
|
stat = dl_done_list(ohci);
|
|
ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
|
|
(void)ohci_readl(®s->intrdisable); /* flush */
|
|
}
|
|
|
|
if (ints & OHCI_INTR_SO) {
|
|
dbg("USB Schedule overrun\n");
|
|
ohci_writel(OHCI_INTR_SO, ®s->intrenable);
|
|
stat = -1;
|
|
}
|
|
|
|
/* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
|
|
if (ints & OHCI_INTR_SF) {
|
|
unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
|
|
mdelay(1);
|
|
ohci_writel(OHCI_INTR_SF, ®s->intrdisable);
|
|
if (ohci->ed_rm_list[frame] != NULL)
|
|
ohci_writel(OHCI_INTR_SF, ®s->intrenable);
|
|
stat = 0xff;
|
|
}
|
|
|
|
ohci_writel(ints, ®s->intrstatus);
|
|
return stat;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_USB)
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* De-allocate all resources.. */
|
|
|
|
static void hc_release_ohci(ohci_t *ohci)
|
|
{
|
|
dbg("USB HC release ohci usb-%s", ohci->slot_name);
|
|
|
|
if (!ohci->disabled)
|
|
hc_reset(ohci);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* low level initalisation routine, called from usb.c
|
|
*/
|
|
static char ohci_inited = 0;
|
|
|
|
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
|
|
{
|
|
#ifdef CONFIG_PCI_OHCI
|
|
pci_dev_t pdev;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
/* cpu dependant init */
|
|
if (usb_cpu_init())
|
|
return -1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
/* board dependant init */
|
|
if (board_usb_init(index, USB_INIT_HOST))
|
|
return -1;
|
|
#endif
|
|
memset(&gohci, 0, sizeof(ohci_t));
|
|
|
|
/* align the storage */
|
|
if ((__u32)&ghcca[0] & 0xff) {
|
|
err("HCCA not aligned!!");
|
|
return -1;
|
|
}
|
|
gohci.hcca = &ghcca[0];
|
|
info("aligned ghcca %p", gohci.hcca);
|
|
memset(gohci.hcca, 0, sizeof(struct ohci_hcca));
|
|
|
|
gohci.disabled = 1;
|
|
gohci.sleeping = 0;
|
|
gohci.irq = -1;
|
|
#ifdef CONFIG_PCI_OHCI
|
|
pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO);
|
|
|
|
if (pdev != -1) {
|
|
u16 vid, did;
|
|
u32 base;
|
|
pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
|
|
pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
|
|
printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
|
|
vid, did, (pdev >> 16) & 0xff,
|
|
(pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
|
|
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
|
|
printf("OHCI regs address 0x%08x\n", base);
|
|
gohci.regs = (struct ohci_regs *)base;
|
|
} else {
|
|
printf("%s: OHCI devnr: %d not found\n", __func__,
|
|
CONFIG_PCI_OHCI_DEVNO);
|
|
return -1;
|
|
}
|
|
#else
|
|
gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
|
|
#endif
|
|
|
|
gohci.flags = 0;
|
|
gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
|
|
|
|
if (hc_reset (&gohci) < 0) {
|
|
hc_release_ohci (&gohci);
|
|
err ("can't reset usb-%s", gohci.slot_name);
|
|
#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
/* board dependant cleanup */
|
|
board_usb_cleanup(index, USB_INIT_HOST);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
/* cpu dependant cleanup */
|
|
usb_cpu_init_fail();
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
if (hc_start(&gohci) < 0) {
|
|
err("can't start usb-%s", gohci.slot_name);
|
|
hc_release_ohci(&gohci);
|
|
/* Initialization failed */
|
|
#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
/* board dependant cleanup */
|
|
usb_board_stop();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
/* cpu dependant cleanup */
|
|
usb_cpu_stop();
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
ohci_dump(&gohci, 1);
|
|
#else
|
|
ohci_mdelay(1);
|
|
#endif
|
|
ohci_inited = 1;
|
|
return 0;
|
|
}
|
|
|
|
int usb_lowlevel_stop(int index)
|
|
{
|
|
/* this gets called really early - before the controller has */
|
|
/* even been initialized! */
|
|
if (!ohci_inited)
|
|
return 0;
|
|
/* TODO release any interrupts, etc. */
|
|
/* call hc_release_ohci() here ? */
|
|
hc_reset(&gohci);
|
|
|
|
#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
/* board dependant cleanup */
|
|
if (usb_board_stop())
|
|
return -1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
/* cpu dependant cleanup */
|
|
if (usb_cpu_stop())
|
|
return -1;
|
|
#endif
|
|
/* This driver is no longer initialised. It needs a new low-level
|
|
* init (board/cpu) before it can be used again. */
|
|
ohci_inited = 0;
|
|
return 0;
|
|
}
|
|
|
|
int submit_control_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int transfer_len, struct devrequest *setup)
|
|
{
|
|
return _ohci_submit_control_msg(&gohci, dev, pipe, buffer,
|
|
transfer_len, setup);
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_USB)
|
|
static int ohci_submit_control_msg(struct udevice *dev, struct usb_device *udev,
|
|
unsigned long pipe, void *buffer, int length,
|
|
struct devrequest *setup)
|
|
{
|
|
ohci_t *ohci = dev_get_priv(usb_get_bus(dev));
|
|
|
|
return _ohci_submit_control_msg(ohci, udev, pipe, buffer,
|
|
length, setup);
|
|
}
|
|
|
|
static int ohci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev,
|
|
unsigned long pipe, void *buffer, int length)
|
|
{
|
|
ohci_t *ohci = dev_get_priv(usb_get_bus(dev));
|
|
|
|
return submit_common_msg(ohci, udev, pipe, buffer, length, NULL, 0);
|
|
}
|
|
|
|
static int ohci_submit_int_msg(struct udevice *dev, struct usb_device *udev,
|
|
unsigned long pipe, void *buffer, int length,
|
|
int interval, bool nonblock)
|
|
{
|
|
ohci_t *ohci = dev_get_priv(usb_get_bus(dev));
|
|
|
|
return submit_common_msg(ohci, udev, pipe, buffer, length,
|
|
NULL, interval);
|
|
}
|
|
|
|
static struct int_queue *ohci_create_int_queue(struct udevice *dev,
|
|
struct usb_device *udev, unsigned long pipe, int queuesize,
|
|
int elementsize, void *buffer, int interval)
|
|
{
|
|
ohci_t *ohci = dev_get_priv(usb_get_bus(dev));
|
|
|
|
return _ohci_create_int_queue(ohci, udev, pipe, queuesize, elementsize,
|
|
buffer, interval);
|
|
}
|
|
|
|
static void *ohci_poll_int_queue(struct udevice *dev, struct usb_device *udev,
|
|
struct int_queue *queue)
|
|
{
|
|
ohci_t *ohci = dev_get_priv(usb_get_bus(dev));
|
|
|
|
return _ohci_poll_int_queue(ohci, udev, queue);
|
|
}
|
|
|
|
static int ohci_destroy_int_queue(struct udevice *dev, struct usb_device *udev,
|
|
struct int_queue *queue)
|
|
{
|
|
ohci_t *ohci = dev_get_priv(usb_get_bus(dev));
|
|
|
|
return _ohci_destroy_int_queue(ohci, udev, queue);
|
|
}
|
|
|
|
int ohci_register(struct udevice *dev, struct ohci_regs *regs)
|
|
{
|
|
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
|
|
ohci_t *ohci = dev_get_priv(dev);
|
|
u32 reg;
|
|
|
|
priv->desc_before_addr = true;
|
|
|
|
ohci->regs = regs;
|
|
ohci->hcca = memalign(256, sizeof(struct ohci_hcca));
|
|
if (!ohci->hcca)
|
|
return -ENOMEM;
|
|
memset(ohci->hcca, 0, sizeof(struct ohci_hcca));
|
|
flush_dcache_hcca(ohci->hcca);
|
|
|
|
if (hc_reset(ohci) < 0)
|
|
return -EIO;
|
|
|
|
if (hc_start(ohci) < 0)
|
|
return -EIO;
|
|
|
|
reg = ohci_readl(®s->revision);
|
|
printf("USB OHCI %x.%x\n", (reg >> 4) & 0xf, reg & 0xf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ohci_deregister(struct udevice *dev)
|
|
{
|
|
ohci_t *ohci = dev_get_priv(dev);
|
|
|
|
if (hc_reset(ohci) < 0)
|
|
return -EIO;
|
|
|
|
free(ohci->hcca);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct dm_usb_ops ohci_usb_ops = {
|
|
.control = ohci_submit_control_msg,
|
|
.bulk = ohci_submit_bulk_msg,
|
|
.interrupt = ohci_submit_int_msg,
|
|
.create_int_queue = ohci_create_int_queue,
|
|
.poll_int_queue = ohci_poll_int_queue,
|
|
.destroy_int_queue = ohci_destroy_int_queue,
|
|
};
|
|
|
|
#endif
|