u-boot/drivers/mmc/s3c_sdi.c
Jaehoon Chung 915ffa5213 mmc: use the generic error number
Use the generic error number instead of specific error number.
If use the generic error number, it can debug more easier.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-08-05 11:21:25 +09:00

321 lines
7.7 KiB
C

/*
* S3C24xx SD/MMC driver
*
* Based on OpenMoko S3C24xx driver by Harald Welte <laforge@openmoko.org>
*
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <mmc.h>
#include <errno.h>
#include <asm/arch/s3c24x0_cpu.h>
#include <asm/io.h>
#include <asm/unaligned.h>
#define S3C2440_SDICON_SDRESET (1 << 8)
#define S3C2410_SDICON_FIFORESET (1 << 1)
#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
#define S3C2410_SDICMDCON_INDEX 0x3f
#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
#define S3C2440_SDIDCON_DS_WORD (2 << 22)
#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
#define S3C2440_SDIDCON_DATSTART (1 << 14)
#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
#define S3C2410_SDIDCON_BLKNUM 0x7ff
#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
#define S3C2410_SDIFSTA_TFHALF (1 << 11)
#define S3C2410_SDIFSTA_COUNTMASK 0x7f
/*
* WARNING: We only support one SD IP block.
* NOTE: It's not likely there will ever exist an S3C24xx with two,
* at least not in this universe all right.
*/
static int wide_bus;
static int
s3cmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
uint32_t sdiccon, sdicsta, sdidcon, sdidsta, sdidat, sdifsta;
uint32_t sdicsta_wait_bit = S3C2410_SDICMDSTAT_CMDSENT;
unsigned int timeout = 100000;
int ret = 0, xfer_len, data_offset = 0;
const uint32_t sdidsta_err_mask = S3C2410_SDIDSTA_FIFOFAIL |
S3C2410_SDIDSTA_CRCFAIL | S3C2410_SDIDSTA_RXCRCFAIL |
S3C2410_SDIDSTA_DATATIMEOUT;
writel(0xffffffff, &sdi_regs->sdicsta);
writel(0xffffffff, &sdi_regs->sdidsta);
writel(0xffffffff, &sdi_regs->sdifsta);
/* Set up data transfer (if applicable). */
if (data) {
writel(data->blocksize, &sdi_regs->sdibsize);
sdidcon = data->blocks & S3C2410_SDIDCON_BLKNUM;
sdidcon |= S3C2410_SDIDCON_BLOCKMODE;
#if defined(CONFIG_S3C2440)
sdidcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART;
#endif
if (wide_bus)
sdidcon |= S3C2410_SDIDCON_WIDEBUS;
if (data->flags & MMC_DATA_READ) {
sdidcon |= S3C2410_SDIDCON_RXAFTERCMD;
sdidcon |= S3C2410_SDIDCON_XFER_RXSTART;
} else {
sdidcon |= S3C2410_SDIDCON_TXAFTERRESP;
sdidcon |= S3C2410_SDIDCON_XFER_TXSTART;
}
writel(sdidcon, &sdi_regs->sdidcon);
}
/* Write CMD arg. */
writel(cmd->cmdarg, &sdi_regs->sdicarg);
/* Write CMD index. */
sdiccon = cmd->cmdidx & S3C2410_SDICMDCON_INDEX;
sdiccon |= S3C2410_SDICMDCON_SENDERHOST;
sdiccon |= S3C2410_SDICMDCON_CMDSTART;
/* Command with short response. */
if (cmd->resp_type & MMC_RSP_PRESENT) {
sdiccon |= S3C2410_SDICMDCON_WAITRSP;
sdicsta_wait_bit = S3C2410_SDICMDSTAT_RSPFIN;
}
/* Command with long response. */
if (cmd->resp_type & MMC_RSP_136)
sdiccon |= S3C2410_SDICMDCON_LONGRSP;
/* Start the command. */
writel(sdiccon, &sdi_regs->sdiccon);
/* Wait for the command to complete or for response. */
for (timeout = 100000; timeout; timeout--) {
sdicsta = readl(&sdi_regs->sdicsta);
if (sdicsta & sdicsta_wait_bit)
break;
if (sdicsta & S3C2410_SDICMDSTAT_CMDTIMEOUT)
timeout = 1;
}
/* Clean the status bits. */
setbits_le32(&sdi_regs->sdicsta, 0xf << 9);
if (!timeout) {
puts("S3C SDI: Command timed out!\n");
ret = -ETIMEDOUT;
goto error;
}
/* Read out the response. */
if (cmd->resp_type & MMC_RSP_136) {
cmd->response[0] = readl(&sdi_regs->sdirsp0);
cmd->response[1] = readl(&sdi_regs->sdirsp1);
cmd->response[2] = readl(&sdi_regs->sdirsp2);
cmd->response[3] = readl(&sdi_regs->sdirsp3);
} else {
cmd->response[0] = readl(&sdi_regs->sdirsp0);
}
/* If there are no data, we're done. */
if (!data)
return 0;
xfer_len = data->blocksize * data->blocks;
while (xfer_len > 0) {
sdidsta = readl(&sdi_regs->sdidsta);
sdifsta = readl(&sdi_regs->sdifsta);
if (sdidsta & sdidsta_err_mask) {
printf("S3C SDI: Data error (sdta=0x%08x)\n", sdidsta);
ret = -EIO;
goto error;
}
if (data->flags & MMC_DATA_READ) {
if ((sdifsta & S3C2410_SDIFSTA_COUNTMASK) < 4)
continue;
sdidat = readl(&sdi_regs->sdidat);
put_unaligned_le32(sdidat, data->dest + data_offset);
} else { /* Write */
/* TX FIFO half full. */
if (!(sdifsta & S3C2410_SDIFSTA_TFHALF))
continue;
/* TX FIFO is below 32b full, write. */
sdidat = get_unaligned_le32(data->src + data_offset);
writel(sdidat, &sdi_regs->sdidat);
}
data_offset += 4;
xfer_len -= 4;
}
/* Wait for the command to complete or for response. */
for (timeout = 100000; timeout; timeout--) {
sdidsta = readl(&sdi_regs->sdidsta);
if (sdidsta & S3C2410_SDIDSTA_XFERFINISH)
break;
if (sdidsta & S3C2410_SDIDSTA_DATATIMEOUT)
timeout = 1;
}
/* Clear status bits. */
writel(0x6f8, &sdi_regs->sdidsta);
if (!timeout) {
puts("S3C SDI: Command timed out!\n");
ret = -ETIMEDOUT;
goto error;
}
writel(0, &sdi_regs->sdidcon);
return 0;
error:
return ret;
}
static void s3cmmc_set_ios(struct mmc *mmc)
{
struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
uint32_t divider = 0;
wide_bus = (mmc->bus_width == 4);
if (!mmc->clock)
return;
divider = DIV_ROUND_UP(get_PCLK(), mmc->clock);
if (divider)
divider--;
writel(divider, &sdi_regs->sdipre);
mdelay(125);
}
static int s3cmmc_init(struct mmc *mmc)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
/* Start the clock. */
setbits_le32(&clk_power->clkcon, 1 << 9);
#if defined(CONFIG_S3C2440)
writel(S3C2440_SDICON_SDRESET, &sdi_regs->sdicon);
mdelay(10);
writel(0x7fffff, &sdi_regs->sdidtimer);
#else
writel(0xffff, &sdi_regs->sdidtimer);
#endif
writel(MMC_MAX_BLOCK_LEN, &sdi_regs->sdibsize);
writel(0x0, &sdi_regs->sdiimsk);
writel(S3C2410_SDICON_FIFORESET | S3C2410_SDICON_CLOCKTYPE,
&sdi_regs->sdicon);
mdelay(125);
return 0;
}
struct s3cmmc_priv {
struct mmc_config cfg;
int (*getcd)(struct mmc *);
int (*getwp)(struct mmc *);
};
static int s3cmmc_getcd(struct mmc *mmc)
{
struct s3cmmc_priv *priv = mmc->priv;
if (priv->getcd)
return priv->getcd(mmc);
else
return 0;
}
static int s3cmmc_getwp(struct mmc *mmc)
{
struct s3cmmc_priv *priv = mmc->priv;
if (priv->getwp)
return priv->getwp(mmc);
else
return 0;
}
static const struct mmc_ops s3cmmc_ops = {
.send_cmd = s3cmmc_send_cmd,
.set_ios = s3cmmc_set_ios,
.init = s3cmmc_init,
.getcd = s3cmmc_getcd,
.getwp = s3cmmc_getwp,
};
int s3cmmc_initialize(bd_t *bis, int (*getcd)(struct mmc *),
int (*getwp)(struct mmc *))
{
struct s3cmmc_priv *priv;
struct mmc *mmc;
struct mmc_config *cfg;
priv = calloc(1, sizeof(*priv));
if (!priv)
return -ENOMEM;
cfg = &priv->cfg;
cfg->name = "S3C MMC";
cfg->ops = &s3cmmc_ops;
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_HS;
cfg->f_min = 400000;
cfg->f_max = get_PCLK() / 2;
cfg->b_max = 0x80;
#if defined(CONFIG_S3C2410)
/*
* S3C2410 has some bug that prevents reliable
* operation at higher speed
*/
cfg->f_max /= 2;
#endif
mmc = mmc_create(cfg, priv);
if (!mmc) {
free(priv);
return -ENOMEM;
}
return 0;
}