Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-01 17:10:11 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi
Ariel D'Alessandro 6c317fedc7 bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards 
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.

Add support for iMX8MN BSH SMM S2 board:

- 256 MiB DDR3 RAM
- 512MiB Nand
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Add support for iMX8MN BSH SMM S2 PRO board:

- 512 MiB DDR3 RAM
- 8 GiB eMMC
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-04-12 19:10:44 +02:00

423 lines
9.7 KiB
Text
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 Collabora Ltd.
* Copyright 2021 BSH Hausgeraete GmbH
*/
#include "imx8mn.dtsi"
/ {
chosen {
stdout-path = &uart4;
};
fec_supply: fec_supply_en {
compatible = "regulator-fixed";
regulator-name = "tja1101_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
vin-supply = <&buck4_reg>;
enable-active-high;
};
usdhc2_pwrseq: usdhc2_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_pwrseq>;
reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
};
&A53_0 {
cpu-supply = <&buck2_reg>;
};
&A53_1 {
cpu-supply = <&buck2_reg>;
};
&A53_2 {
cpu-supply = <&buck2_reg>;
};
&A53_3 {
cpu-supply = <&buck2_reg>;
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
phy-supply = <&fec_supply>;
phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
bd71847: pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
buck1_reg: BUCK1 {
/* PMIC_BUCK1 - VDD_SOC */
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
buck2_reg: BUCK2 {
/* PMIC_BUCK2 - VDD_ARM */
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
buck3_reg: BUCK3 {
/* PMIC_BUCK5 - VDD_DRAM_VPU_GPU */
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
buck4_reg: BUCK4 {
/* PMIC_BUCK6 - VDD_3V3 */
regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5_reg: BUCK5 {
/* PMIC_BUCK7 - VDD_1V8 */
regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
buck6_reg: BUCK6 {
/* PMIC_BUCK8 - NVCC_DRAM */
regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: LDO1 {
/* PMIC_LDO1 - NVCC_SNVS_1V8 */
regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1900000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: LDO2 {
/* PMIC_LDO2 - VDD_SNVS_0V8 */
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: LDO3 {
/* PMIC_LDO3 - VDDA_1V8 */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: LDO4 {
/* PMIC_LDO4 - VDD_MIPI_0V9 */
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo6_reg: LDO6 {
/* PMIC_LDO6 - VDD_MIPI_1V2 */
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clk IMX8MN_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bluetooth>;
shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
max-speed = <3000000>;
};
};
/* Console */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbotg1 {
dr_mode = "peripheral";
disable-over-current;
status = "okay";
};
&usdhc2 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
mmc-pwrseq = <&usdhc2_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: bcrmf@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan>;
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
};
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_espi2: espi2grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082
MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082
MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x082
MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x040
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c2
MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c2
MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400000c2
MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400000c2
>;
};
pinctrl_pmic: pmicirq {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x040
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040
MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040
>;
};
pinctrl_usdhc2_pwrseq: usdhc2pwrseqgrp {
fsl,pins = <
MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x040 /* WL_REG_ON */
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x090
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d0
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d0
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d0
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d0
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x094
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d4
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d4
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d4
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d4
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x096
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d6
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d6
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d6
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d6
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d6
>;
};
pinctrl_wlan: wlangrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x0d6 /* GPIO_0 - WIFI_GPIO_0 */
MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x0d6 /* GPIO_1 - WIFI_GPIO_1 */
MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x0d6 /* BT_GPIO_5 - WIFI_GPIO_5 */
MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x0d6 /* I2S_CLK - WIFI_GPIO_6 */
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x040
MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x040
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x040
MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x040
MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x040
MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x040
>;
};
pinctrl_bluetooth: bluetoothgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x044 /* BT_REG_ON */
MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x046 /* BT_DEV_WAKE */
MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x090 /* BT_HOST_WAKE */
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x046
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x002
MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x002
MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090
MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x090
MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER 0x090
MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x016
MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x016
MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x016
MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x016
MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x090
MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER 0x016
MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x150 /* RMII_INT - ENET_INT */
MX8MN_IOMUXC_SD2_WP_GPIO2_IO20 0x150 /* RMII_EN - ENET_EN */
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x016 /* RMII_WAKE - GPIO_ENET_WAKE */
MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x016 /* RMII_RESET - GPIO_ENET_RST */
>;
};
};
Reference in a new issue View git blame Copy permalink