mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
09381829a2
Similar to dm_rtc_read(), introduce a helper that allows the caller to write multiple consecutive 8-bit registers with one call. If the driver provides the ->write method, use that, otherwise loop using ->write8. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
324 lines
7.8 KiB
C
324 lines
7.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
/*
|
|
* Generic RTC interface.
|
|
*/
|
|
#ifndef _RTC_H_
|
|
#define _RTC_H_
|
|
|
|
/* bcd<->bin functions are needed by almost all the RTC drivers, let's include
|
|
* it there instead of in evey single driver */
|
|
|
|
#include <bcd.h>
|
|
#include <rtc_def.h>
|
|
|
|
#ifdef CONFIG_DM_RTC
|
|
|
|
struct udevice;
|
|
|
|
struct rtc_ops {
|
|
/**
|
|
* get() - get the current time
|
|
*
|
|
* Returns the current time read from the RTC device. The driver
|
|
* is responsible for setting up every field in the structure.
|
|
*
|
|
* @dev: Device to read from
|
|
* @time: Place to put the time that is read
|
|
*/
|
|
int (*get)(struct udevice *dev, struct rtc_time *time);
|
|
|
|
/**
|
|
* set() - set the current time
|
|
*
|
|
* Sets the time in the RTC device. The driver can expect every
|
|
* field to be set correctly.
|
|
*
|
|
* @dev: Device to read from
|
|
* @time: Time to write
|
|
*/
|
|
int (*set)(struct udevice *dev, const struct rtc_time *time);
|
|
|
|
/**
|
|
* reset() - reset the RTC to a known-good state
|
|
*
|
|
* This function resets the RTC to a known-good state. The time may
|
|
* be unset by this method, so should be set after this method is
|
|
* called.
|
|
*
|
|
* @dev: Device to read from
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*reset)(struct udevice *dev);
|
|
|
|
/**
|
|
* read() - Read multiple 8-bit registers
|
|
*
|
|
* @dev: Device to read from
|
|
* @reg: First register to read
|
|
* @buf: Output buffer
|
|
* @len: Number of registers to read
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*read)(struct udevice *dev, unsigned int reg,
|
|
u8 *buf, unsigned int len);
|
|
|
|
/**
|
|
* write() - Write multiple 8-bit registers
|
|
*
|
|
* @dev: Device to write to
|
|
* @reg: First register to write
|
|
* @buf: Input buffer
|
|
* @len: Number of registers to write
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*write)(struct udevice *dev, unsigned int reg,
|
|
const u8 *buf, unsigned int len);
|
|
|
|
/**
|
|
* read8() - Read an 8-bit register
|
|
*
|
|
* @dev: Device to read from
|
|
* @reg: Register to read
|
|
* @return value read, or -ve on error
|
|
*/
|
|
int (*read8)(struct udevice *dev, unsigned int reg);
|
|
|
|
/**
|
|
* write8() - Write an 8-bit register
|
|
*
|
|
* @dev: Device to write to
|
|
* @reg: Register to write
|
|
* @value: Value to write
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*write8)(struct udevice *dev, unsigned int reg, int val);
|
|
};
|
|
|
|
/* Access the operations for an RTC device */
|
|
#define rtc_get_ops(dev) ((struct rtc_ops *)(dev)->driver->ops)
|
|
|
|
/**
|
|
* dm_rtc_get() - Read the time from an RTC
|
|
*
|
|
* @dev: Device to read from
|
|
* @time: Place to put the current time
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int dm_rtc_get(struct udevice *dev, struct rtc_time *time);
|
|
|
|
/**
|
|
* dm_rtc_set() - Write a time to an RTC
|
|
*
|
|
* @dev: Device to read from
|
|
* @time: Time to write into the RTC
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int dm_rtc_set(struct udevice *dev, struct rtc_time *time);
|
|
|
|
/**
|
|
* dm_rtc_reset() - reset the RTC to a known-good state
|
|
*
|
|
* If the RTC appears to be broken (e.g. it is not counting up in seconds)
|
|
* it may need to be reset to a known good state. This function achieves this.
|
|
* After resetting the RTC the time should then be set to a known value by
|
|
* the caller.
|
|
*
|
|
* @dev: Device to read from
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int dm_rtc_reset(struct udevice *dev);
|
|
|
|
/**
|
|
* dm_rtc_read() - Read multiple 8-bit registers
|
|
*
|
|
* @dev: Device to read from
|
|
* @reg: First register to read
|
|
* @buf: Output buffer
|
|
* @len: Number of registers to read
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int dm_rtc_read(struct udevice *dev, unsigned int reg, u8 *buf, unsigned int len);
|
|
|
|
/**
|
|
* dm_rtc_write() - Write multiple 8-bit registers
|
|
*
|
|
* @dev: Device to write to
|
|
* @reg: First register to write
|
|
* @buf: Input buffer
|
|
* @len: Number of registers to write
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int dm_rtc_write(struct udevice *dev, unsigned int reg,
|
|
const u8 *buf, unsigned int len);
|
|
|
|
/**
|
|
* rtc_read8() - Read an 8-bit register
|
|
*
|
|
* @dev: Device to read from
|
|
* @reg: Register to read
|
|
* @return value read, or -ve on error
|
|
*/
|
|
int rtc_read8(struct udevice *dev, unsigned int reg);
|
|
|
|
/**
|
|
* rtc_write8() - Write an 8-bit register
|
|
*
|
|
* @dev: Device to write to
|
|
* @reg: Register to write
|
|
* @value: Value to write
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int rtc_write8(struct udevice *dev, unsigned int reg, int val);
|
|
|
|
/**
|
|
* rtc_read16() - Read a 16-bit value from the RTC
|
|
*
|
|
* @dev: Device to read from
|
|
* @reg: Offset to start reading from
|
|
* @valuep: Place to put the value that is read
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep);
|
|
|
|
/**
|
|
* rtc_write16() - Write a 16-bit value to the RTC
|
|
*
|
|
* @dev: Device to write to
|
|
* @reg: Register to start writing to
|
|
* @value: Value to write
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int rtc_write16(struct udevice *dev, unsigned int reg, u16 value);
|
|
|
|
/**
|
|
* rtc_read32() - Read a 32-bit value from the RTC
|
|
*
|
|
* @dev: Device to read from
|
|
* @reg: Offset to start reading from
|
|
* @valuep: Place to put the value that is read
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep);
|
|
|
|
/**
|
|
* rtc_write32() - Write a 32-bit value to the RTC
|
|
*
|
|
* @dev: Device to write to
|
|
* @reg: Register to start writing to
|
|
* @value: Value to write
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int rtc_write32(struct udevice *dev, unsigned int reg, u32 value);
|
|
|
|
#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
|
|
int rtc_enable_32khz_output(int busnum, int chip_addr);
|
|
#endif
|
|
|
|
#else
|
|
int rtc_get (struct rtc_time *);
|
|
int rtc_set (struct rtc_time *);
|
|
void rtc_reset (void);
|
|
#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
|
|
void rtc_enable_32khz_output(void);
|
|
#endif
|
|
|
|
/**
|
|
* rtc_read8() - Read an 8-bit register
|
|
*
|
|
* @reg: Register to read
|
|
* @return value read
|
|
*/
|
|
int rtc_read8(int reg);
|
|
|
|
/**
|
|
* rtc_write8() - Write an 8-bit register
|
|
*
|
|
* @reg: Register to write
|
|
* @value: Value to write
|
|
*/
|
|
void rtc_write8(int reg, uchar val);
|
|
|
|
/**
|
|
* rtc_read32() - Read a 32-bit value from the RTC
|
|
*
|
|
* @reg: Offset to start reading from
|
|
* @return value read
|
|
*/
|
|
u32 rtc_read32(int reg);
|
|
|
|
/**
|
|
* rtc_write32() - Write a 32-bit value to the RTC
|
|
*
|
|
* @reg: Register to start writing to
|
|
* @value: Value to write
|
|
*/
|
|
void rtc_write32(int reg, u32 value);
|
|
|
|
/**
|
|
* rtc_init() - Set up the real time clock ready for use
|
|
*/
|
|
void rtc_init(void);
|
|
#endif /* CONFIG_DM_RTC */
|
|
|
|
/**
|
|
* is_leap_year - Check if year is a leap year
|
|
*
|
|
* @year Year
|
|
* @return 1 if leap year
|
|
*/
|
|
static inline bool is_leap_year(unsigned int year)
|
|
{
|
|
return (!(year % 4) && (year % 100)) || !(year % 400);
|
|
}
|
|
|
|
/**
|
|
* rtc_calc_weekday() - Work out the weekday from a time
|
|
*
|
|
* This only works for the Gregorian calendar - i.e. after 1752 (in the UK).
|
|
* It sets time->tm_wdaay to the correct day of the week.
|
|
*
|
|
* @time: Time to inspect. tm_wday is updated
|
|
* @return 0 if OK, -EINVAL if the weekday could not be determined
|
|
*/
|
|
int rtc_calc_weekday(struct rtc_time *time);
|
|
|
|
/**
|
|
* rtc_to_tm() - Convert a time_t value into a broken-out time
|
|
*
|
|
* The following fields are set up by this function:
|
|
* tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year, tm_wday
|
|
*
|
|
* Note that tm_yday and tm_isdst are set to 0.
|
|
*
|
|
* @time_t: Number of seconds since 1970-01-01 00:00:00
|
|
* @time: Place to put the broken-out time
|
|
*/
|
|
void rtc_to_tm(u64 time_t, struct rtc_time *time);
|
|
|
|
/**
|
|
* rtc_mktime() - Convert a broken-out time into a time_t value
|
|
*
|
|
* The following fields need to be valid for this function to work:
|
|
* tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year
|
|
*
|
|
* Note that tm_wday and tm_yday are ignored.
|
|
*
|
|
* @time: Broken-out time to convert
|
|
* @return corresponding time_t value, seconds since 1970-01-01 00:00:00
|
|
*/
|
|
unsigned long rtc_mktime(const struct rtc_time *time);
|
|
|
|
/**
|
|
* rtc_month_days() - The number of days in the month
|
|
*
|
|
* @month: month (January = 0)
|
|
* @year: year (4 digits)
|
|
*/
|
|
int rtc_month_days(unsigned int month, unsigned int year);
|
|
|
|
#endif /* _RTC_H_ */
|