u-boot/cmd/dfu.c
Patrick Delaunay febabe3ed4 dfu: allow to manage DFU on several devices
Add support of DFU for several interface/device
with one command.

The format for "dfu_alt_info" in this case is :
- <interface> <dev>'='alternate list (';' separated)
- each interface is separated by '&'

The previous behavior is always supported.

One example for NOR (bootloaders) + NAND (rootfs in UBI):

U-Boot> env set dfu_alt_info \
"sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
u-boot-env part 0 3&nand 0=UBI partubi 0,3"

U-Boot> dfu 0 list

DFU alt settings list:
dev: SF alt: 0 name: spl layout: RAW_ADDR
dev: SF alt: 1 name: ssbl layout: RAW_ADDR
dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
dev: NAND alt: 3 name: UBI layout: RAW_ADDR

U-Boot> dfu 0

$> dfu-util -l

Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=3, name="UBI", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=0, name="spl", serial="002700333338511934383330"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00

91 lines
2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* cmd_dfu.c -- dfu command
*
* Copyright (C) 2015
* Lukasz Majewski <l.majewski@majess.pl>
*
* Copyright (C) 2012 Samsung Electronics
* authors: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
* Lukasz Majewski <l.majewski@samsung.com>
*/
#include <common.h>
#include <watchdog.h>
#include <dfu.h>
#include <console.h>
#include <g_dnl.h>
#include <usb.h>
#include <net.h>
static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
#ifdef CONFIG_DFU_OVER_USB
char *usb_controller = argv[1];
#endif
#if defined(CONFIG_DFU_OVER_USB) || defined(CONFIG_DFU_OVER_TFTP)
char *interface = NULL;
char *devstring = NULL;
if (argc >= 4) {
interface = argv[2];
devstring = argv[3];
}
#endif
int ret = 0;
#ifdef CONFIG_DFU_OVER_TFTP
unsigned long addr = 0;
if (!strcmp(argv[1], "tftp")) {
if (argc == 5 || argc == 3)
addr = simple_strtoul(argv[argc - 1], NULL, 0);
return update_tftp(addr, interface, devstring);
}
#endif
#ifdef CONFIG_DFU_OVER_USB
ret = dfu_init_env_entities(interface, devstring);
if (ret)
goto done;
ret = CMD_RET_SUCCESS;
if (strcmp(argv[argc - 1], "list") == 0) {
dfu_show_entities();
goto done;
}
int controller_index = simple_strtoul(usb_controller, NULL, 0);
run_usb_dnl_gadget(controller_index, "usb_dnl_dfu");
done:
dfu_free_entities();
#endif
return ret;
}
U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
"Device Firmware Upgrade",
""
#ifdef CONFIG_DFU_OVER_USB
"<USB_controller> [<interface> <dev>] [list]\n"
" - device firmware upgrade via <USB_controller>\n"
" on device <dev>, attached to interface\n"
" <interface>\n"
" [list] - list available alt settings\n"
#endif
#ifdef CONFIG_DFU_OVER_TFTP
#ifdef CONFIG_DFU_OVER_USB
"dfu "
#endif
"tftp [<interface> <dev>] [<addr>]\n"
" - device firmware upgrade via TFTP\n"
" on device <dev>, attached to interface\n"
" <interface>\n"
" [<addr>] - address where FIT image has been stored\n"
#endif
);