u-boot/board/isee/igep00x0/igep00x0.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

258 lines
6.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* ISEE 2007 SL, <www.iseebcn.com>
*/
#include <common.h>
#include <status_led.h>
#include <dm.h>
#include <ns16550.h>
#include <twl4030.h>
#include <netdev.h>
#include <spl.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/onenand.h>
#include <jffs2/load_kernel.h>
#include <mtd_node.h>
#include <fdt_support.h>
#include "igep00x0.h"
static const struct ns16550_platdata igep_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
.clock = V_NS16550_CLK,
.fcr = UART_FCR_DEFVAL,
};
U_BOOT_DEVICE(igep_uart) = {
"ns16550_serial",
&igep_serial
};
/*
* Routine: get_board_revision
* Description: GPIO_28 and GPIO_129 are used to read board and revision from
* IGEP00x0 boards. First of all, it is necessary to reset USB transceiver from
* IGEP0030 in order to read GPIO_IGEP00X0_BOARD_DETECTION correctly, because
* this functionality is shared by USB HOST.
* Once USB reset is applied, U-boot configures these pins as input pullup to
* detect board and revision:
* IGEP0020-RF = 0b00
* IGEP0020-RC = 0b01
* IGEP0030-RG = 0b10
* IGEP0030-RE = 0b11
*/
static int get_board_revision(void)
{
int revision;
gpio_request(IGEP0030_USB_TRANSCEIVER_RESET,
"igep0030_usb_transceiver_reset");
gpio_direction_output(IGEP0030_USB_TRANSCEIVER_RESET, 0);
gpio_request(GPIO_IGEP00X0_BOARD_DETECTION, "igep00x0_board_detection");
gpio_direction_input(GPIO_IGEP00X0_BOARD_DETECTION);
revision = 2 * gpio_get_value(GPIO_IGEP00X0_BOARD_DETECTION);
gpio_free(GPIO_IGEP00X0_BOARD_DETECTION);
gpio_request(GPIO_IGEP00X0_REVISION_DETECTION,
"igep00x0_revision_detection");
gpio_direction_input(GPIO_IGEP00X0_REVISION_DETECTION);
revision = revision + gpio_get_value(GPIO_IGEP00X0_REVISION_DETECTION);
gpio_free(GPIO_IGEP00X0_REVISION_DETECTION);
gpio_free(IGEP0030_USB_TRANSCEIVER_RESET);
return revision;
}
int onenand_board_init(struct mtd_info *mtd)
{
if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) {
struct onenand_chip *this = mtd->priv;
this->base = (void *)CONFIG_SYS_ONENAND_BASE;
return 0;
}
return 1;
}
#if defined(CONFIG_CMD_NET)
static void reset_net_chip(int gpio)
{
if (!gpio_request(gpio, "eth nrst")) {
gpio_direction_output(gpio, 1);
udelay(1);
gpio_set_value(gpio, 0);
udelay(40);
gpio_set_value(gpio, 1);
mdelay(10);
}
}
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
* Ethernet hardware.
*/
static void setup_net_chip(void)
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
static const u32 gpmc_lan_config[] = {
NET_LAN9221_GPMC_CONFIG1,
NET_LAN9221_GPMC_CONFIG2,
NET_LAN9221_GPMC_CONFIG3,
NET_LAN9221_GPMC_CONFIG4,
NET_LAN9221_GPMC_CONFIG5,
NET_LAN9221_GPMC_CONFIG6,
};
enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
reset_net_chip(64);
}
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_SMC911X
return smc911x_initialize(0, CONFIG_SMC911X_BASE);
#else
return 0;
#endif
}
#else
static inline void setup_net_chip(void) {}
#endif
#ifdef CONFIG_OF_BOARD_SETUP
static int ft_enable_by_compatible(void *blob, char *compat, int enable)
{
int off = fdt_node_offset_by_compatible(blob, -1, compat);
if (off < 0)
return off;
if (enable)
fdt_status_okay(blob, off);
else
fdt_status_disabled(blob, off);
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
static struct node_info nodes[] = {
{ "ti,omap2-nand", MTD_DEV_TYPE_NAND, },
{ "ti,omap2-onenand", MTD_DEV_TYPE_ONENAND, },
};
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
ft_enable_by_compatible(blob, "ti,omap2-nand",
gpmc_cs0_flash == MTD_DEV_TYPE_NAND);
ft_enable_by_compatible(blob, "ti,omap2-onenand",
gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND);
return 0;
}
#endif
void set_led(void)
{
switch (get_board_revision()) {
case 0:
case 1:
gpio_request(IGEP0020_GPIO_LED, "igep0020_gpio_led");
gpio_direction_output(IGEP0020_GPIO_LED, 1);
break;
case 2:
case 3:
gpio_request(IGEP0030_GPIO_LED, "igep0030_gpio_led");
gpio_direction_output(IGEP0030_GPIO_LED, 0);
break;
default:
/* Should not happen... */
break;
}
}
void set_boardname(void)
{
char rev[5] = { 'F','C','G','E', };
int i = get_board_revision();
rev[i+1] = 0;
env_set("board_rev", rev + i);
env_set("board_name", i < 2 ? "igep0020" : "igep0030");
}
/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
int misc_init_r(void)
{
t2_t *t2_base = (t2_t *)T2_BASE;
u32 pbias_lite;
twl4030_power_init();
/* set VSIM to 1.8V */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
TWL4030_PM_RECEIVER_VSIM_VSEL_18,
TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
/* set up dual-voltage GPIOs to 1.8V */
pbias_lite = readl(&t2_base->pbias_lite);
pbias_lite &= ~PBIASLITEVMODE1;
pbias_lite |= PBIASLITEPWRDNZ1;
writel(pbias_lite, &t2_base->pbias_lite);
if (get_cpu_family() == CPU_OMAP36XX)
writel(readl(OMAP34XX_CTRL_WKUP_CTRL) |
OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
OMAP34XX_CTRL_WKUP_CTRL);
setup_net_chip();
omap_die_id_display();
set_led();
set_boardname();
return 0;
}
void board_mtdparts_default(const char **mtdids, const char **mtdparts)
{
struct mtd_info *mtd = get_mtd_device(NULL, 0);
if (mtd) {
static char ids[24];
static char parts[48];
const char *linux_name = "omap2-nand";
if (strncmp(mtd->name, "onenand0", 8) == 0)
linux_name = "omap2-onenand";
snprintf(ids, sizeof(ids), "%s=%s", mtd->name, linux_name);
snprintf(parts, sizeof(parts), "mtdparts=%s:%dk(SPL),-(UBI)",
linux_name, 4 * mtd->erasesize >> 10);
*mtdids = ids;
*mtdparts = parts;
}
}