u-boot/include/configs/imx8qm_mek.h
Tom Rini 4b0bcfa7c4 Kconfig: Migrate CONFIG_BOOTM_* options
Migrate all of the existing OS support options that are under
CONFIG_BOOTM_* to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04 12:21:23 -04:00

162 lines
4.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2018 NXP
*/
#ifndef __IMX8QM_MEK_H
#define __IMX8QM_MEK_H
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_TEXT_BASE 0x0
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
#define CONFIG_SPL_STACK 0x013E000
#define CONFIG_SPL_BSS_START_ADDR 0x00128000
#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
#define CONFIG_MALLOC_F_ADDR 0x00120000
#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
#define CONFIG_OF_EMBED
#endif
#define CONFIG_REMAKE_ELF
#define CONFIG_BOARD_EARLY_INIT_F
/* Flat Device Tree Definitions */
#define CONFIG_OF_BOARD_SETUP
#undef CONFIG_CMD_EXPORTENV
#undef CONFIG_CMD_IMPORTENV
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_CRC32
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define USDHC1_BASE_ADDR 0x5B010000
#define USDHC2_BASE_ADDR 0x5B020000
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=Image\0" \
"panel=NULL\0" \
"console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"boot_fdt=try\0" \
"fdt_file=fsl-imx8qxp-mek.dtb\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"booti ${loadaddr} - ${fdt_addr}; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"else " \
"echo wait for boot; " \
"fi;\0" \
"netargs=setenv bootargs console=${console} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
"if test ${ip_dyn} = yes; then " \
"setenv get_cmd dhcp; " \
"else " \
"setenv get_cmd tftp; " \
"fi; " \
"${get_cmd} ${loadaddr} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
"booti ${loadaddr} - ${fdt_addr}; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"else " \
"booti; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
"fi; " \
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
#define CONFIG_LOADADDR 0x80280000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
/* Default environment is in SD */
#define CONFIG_ENV_SIZE 0x1000
#define CONFIG_ENV_OFFSET (64 * SZ_64K)
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
#define CONFIG_SYS_FSL_USDHC_NUM 2
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_2 0x880000000
#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
#define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */
/* Serial */
#define CONFIG_BAUDRATE 115200
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
/* Networking */
#define CONFIG_FEC_XCV_TYPE RGMII
#define FEC_QUIRK_ENET_MAC
#endif /* __IMX8QM_MEK_H */