mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
3dc23f7852
This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
73 lines
1.6 KiB
C
73 lines
1.6 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <nand.h>
|
|
|
|
/* NAND Flash Soc registers */
|
|
struct kwnandf_registers {
|
|
u32 rd_params; /* 0x10418 */
|
|
u32 wr_param; /* 0x1041c */
|
|
u8 pad[0x10470 - 0x1041c - 4];
|
|
u32 ctrl; /* 0x10470 */
|
|
};
|
|
|
|
static struct kwnandf_registers *nf_reg =
|
|
(struct kwnandf_registers *)KW_NANDF_BASE;
|
|
|
|
/*
|
|
* hardware specific access to control-lines/bits
|
|
*/
|
|
#define NAND_ACTCEBOOT_BIT 0x02
|
|
|
|
static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *nc = mtd->priv;
|
|
u32 offs;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
offs = (1 << 0); /* Commands with A[1:0] == 01 */
|
|
else if (ctrl & NAND_ALE)
|
|
offs = (1 << 1); /* Addresses with A[1:0] == 10 */
|
|
else
|
|
return;
|
|
|
|
writeb(cmd, nc->IO_ADDR_W + offs);
|
|
}
|
|
|
|
void kw_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
u32 data;
|
|
|
|
data = readl(&nf_reg->ctrl);
|
|
data |= NAND_ACTCEBOOT_BIT;
|
|
writel(data, &nf_reg->ctrl);
|
|
}
|
|
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
|
|
#if defined(CONFIG_SYS_NAND_NO_SUBPAGE_WRITE)
|
|
nand->options |= NAND_NO_SUBPAGE_WRITE;
|
|
#endif
|
|
#if defined(CONFIG_NAND_ECC_BCH)
|
|
nand->ecc.mode = NAND_ECC_SOFT_BCH;
|
|
#else
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
#endif
|
|
nand->cmd_ctrl = kw_nand_hwcontrol;
|
|
nand->chip_delay = 40;
|
|
nand->select_chip = kw_nand_select_chip;
|
|
return 0;
|
|
}
|