u-boot/board/samsung/smdk6400/config.mk
Guennadi Liakhovetski 11edcfe260 ARM: Add support for S3C6400 based SMDK6400 board
SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
driver for it too. The board can also boot from the NOR flash, but due to
hardware limitations it can only address 64KiB on it, which is not enough
for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-08-31 00:39:47 +02:00

30 lines
731 B
Makefile

#
# (C) Copyright 2002
# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
#
# (C) Copyright 2008
# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
#
# SAMSUNG SMDK6400 board with mDirac3 (ARM1176) cpu
#
# see http://www.samsung.com/ for more information on SAMSUNG
# On SMDK6400 we use the 64 MB SDRAM bank at
#
# 0x50000000 to 0x58000000
#
# Linux-Kernel is expected to be at 0x50008000, entry 0x50008000
#
# we load ourselves to 0x57e00000 without MMU
# with MMU, load address is changed to 0xc7e00000
#
# download area is 0x5000c000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef CONFIG_NAND_SPL
TEXT_BASE = $(RAM_TEXT)
else
TEXT_BASE = 0
endif