mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
8f8b8949e5
The 6x_upgrade script is used to upgrade U-Boot in SPI-NOR on Nitrogen6x/SABRE Lite boards using U-Boot's 'sf' command. U-Boot is placed at offset 0x400 in flash, and the script currently only erases 0x50000 bytes. Since the current head is 319k, any additional features enabled in the configuration will exceed the space erased and cause errors re-programming the device. This patch increases the erase size to the full size of the region allocated for the U-Boot binary. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
45 lines
1.3 KiB
Text
45 lines
1.3 KiB
Text
setenv stdout serial,vga
|
|
echo "check U-Boot" ;
|
|
setenv offset 0x400
|
|
if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
|
|
echo "read $filesize bytes from SD card" ;
|
|
if sf probe || sf probe || \
|
|
sf probe 1 27000000 || sf probe 1 27000000 ; then
|
|
echo "probed SPI ROM" ;
|
|
if sf read 0x12400000 $offset $filesize ; then
|
|
if cmp.b 0x12000000 0x12400000 $filesize ; then
|
|
echo "------- U-Boot versions match" ;
|
|
else
|
|
echo "Need U-Boot upgrade" ;
|
|
echo "Program in 5 seconds" ;
|
|
for n in 5 4 3 2 1 ; do
|
|
echo $n ;
|
|
sleep 1 ;
|
|
done
|
|
echo "erasing" ;
|
|
sf erase 0 0xC0000 ;
|
|
# two steps to prevent bricking
|
|
echo "programming" ;
|
|
sf write 0x12000000 $offset $filesize ;
|
|
echo "verifying" ;
|
|
if sf read 0x12400000 $offset $filesize ; then
|
|
if cmp.b 0x12000000 0x12400000 $filesize ; then
|
|
while echo "---- U-Boot upgraded. reset" ; do
|
|
sleep 120
|
|
done
|
|
else
|
|
echo "Read verification error" ;
|
|
fi
|
|
else
|
|
echo "Error re-reading EEPROM" ;
|
|
fi
|
|
fi
|
|
else
|
|
echo "Error reading boot loader from EEPROM" ;
|
|
fi
|
|
else
|
|
echo "Error initializing EEPROM" ;
|
|
fi ;
|
|
else
|
|
echo "No U-Boot image found on SD card" ;
|
|
fi
|