mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
281 lines
6.7 KiB
C
281 lines
6.7 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc824x.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
#include <i2c.h>
|
|
#include <netdev.h>
|
|
|
|
int sysControlDisplay(int digit, uchar ascii_code);
|
|
extern void Plx9030Init(void);
|
|
extern void SPD67290Init(void);
|
|
|
|
/* We have to clear the initial data area here. Couldn't have done it
|
|
* earlier because DRAM had not been initialized.
|
|
*/
|
|
int board_early_init_f(void)
|
|
{
|
|
|
|
/* enable DUAL UART Mode on CPC45 */
|
|
*(uchar*)DUART_DCR |= 0x1; /* set DCM bit */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
/*
|
|
char revision = BOARD_REV;
|
|
*/
|
|
ulong busfreq = get_bus_freq(0);
|
|
char buf[32];
|
|
|
|
puts ("CPC45 ");
|
|
/*
|
|
printf("Revision %d ", revision);
|
|
*/
|
|
printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
int m, row, col, bank, i, ref;
|
|
unsigned long start, end;
|
|
uint32_t mccr1, mccr2;
|
|
uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
|
|
uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
|
|
uint8_t mber = 0;
|
|
unsigned int tmp;
|
|
|
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
if (i2c_reg_read (0x50, 2) != 0x04)
|
|
return 0; /* Memory type */
|
|
|
|
m = i2c_reg_read (0x50, 5); /* # of physical banks */
|
|
row = i2c_reg_read (0x50, 3); /* # of rows */
|
|
col = i2c_reg_read (0x50, 4); /* # of columns */
|
|
bank = i2c_reg_read (0x50, 17); /* # of logical banks */
|
|
ref = i2c_reg_read (0x50, 12); /* refresh rate / type */
|
|
|
|
CONFIG_READ_WORD(MCCR1, mccr1);
|
|
mccr1 &= 0xffff0000;
|
|
|
|
CONFIG_READ_WORD(MCCR2, mccr2);
|
|
mccr2 &= 0xffff0000;
|
|
|
|
start = CONFIG_SYS_SDRAM_BASE;
|
|
end = start + (1 << (col + row + 3) ) * bank - 1;
|
|
|
|
for (i = 0; i < m; i++) {
|
|
mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
|
|
if (i < 4) {
|
|
msar1 |= ((start >> 20) & 0xff) << i * 8;
|
|
emsar1 |= ((start >> 28) & 0xff) << i * 8;
|
|
mear1 |= ((end >> 20) & 0xff) << i * 8;
|
|
emear1 |= ((end >> 28) & 0xff) << i * 8;
|
|
} else {
|
|
msar2 |= ((start >> 20) & 0xff) << (i-4) * 8;
|
|
emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
|
|
mear2 |= ((end >> 20) & 0xff) << (i-4) * 8;
|
|
emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
|
|
}
|
|
mber |= 1 << i;
|
|
start += (1 << (col + row + 3) ) * bank;
|
|
end += (1 << (col + row + 3) ) * bank;
|
|
}
|
|
for (; i < 8; i++) {
|
|
if (i < 4) {
|
|
msar1 |= 0xff << i * 8;
|
|
emsar1 |= 0x30 << i * 8;
|
|
mear1 |= 0xff << i * 8;
|
|
emear1 |= 0x30 << i * 8;
|
|
} else {
|
|
msar2 |= 0xff << (i-4) * 8;
|
|
emsar2 |= 0x30 << (i-4) * 8;
|
|
mear2 |= 0xff << (i-4) * 8;
|
|
emear2 |= 0x30 << (i-4) * 8;
|
|
}
|
|
}
|
|
|
|
switch(ref) {
|
|
case 0x00:
|
|
case 0x80:
|
|
tmp = get_bus_freq(0) / 1000000 * 15625 / 1000 - 22;
|
|
break;
|
|
case 0x01:
|
|
case 0x81:
|
|
tmp = get_bus_freq(0) / 1000000 * 3900 / 1000 - 22;
|
|
break;
|
|
case 0x02:
|
|
case 0x82:
|
|
tmp = get_bus_freq(0) / 1000000 * 7800 / 1000 - 22;
|
|
break;
|
|
case 0x03:
|
|
case 0x83:
|
|
tmp = get_bus_freq(0) / 1000000 * 31300 / 1000 - 22;
|
|
break;
|
|
case 0x04:
|
|
case 0x84:
|
|
tmp = get_bus_freq(0) / 1000000 * 62500 / 1000 - 22;
|
|
break;
|
|
case 0x05:
|
|
case 0x85:
|
|
tmp = get_bus_freq(0) / 1000000 * 125000 / 1000 - 22;
|
|
break;
|
|
default:
|
|
tmp = 0x512;
|
|
break;
|
|
}
|
|
|
|
CONFIG_WRITE_WORD(MCCR1, mccr1);
|
|
CONFIG_WRITE_WORD(MCCR2, tmp << MCCR2_REFINT_SHIFT);
|
|
CONFIG_WRITE_WORD(MSAR1, msar1);
|
|
CONFIG_WRITE_WORD(EMSAR1, emsar1);
|
|
CONFIG_WRITE_WORD(MEAR1, mear1);
|
|
CONFIG_WRITE_WORD(EMEAR1, emear1);
|
|
CONFIG_WRITE_WORD(MSAR2, msar2);
|
|
CONFIG_WRITE_WORD(EMSAR2, emsar2);
|
|
CONFIG_WRITE_WORD(MEAR2, mear2);
|
|
CONFIG_WRITE_WORD(EMEAR2, emear2);
|
|
CONFIG_WRITE_BYTE(MBER, mber);
|
|
|
|
return (1 << (col + row + 3) ) * bank * m;
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize PCI Devices, report devices found.
|
|
*/
|
|
|
|
static struct pci_config_table pci_cpc45_config_table[] = {
|
|
#ifndef CONFIG_PCI_PNP
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0F, PCI_ANY_ID,
|
|
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0D, PCI_ANY_ID,
|
|
pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
|
|
PCI_PLX9030_MEMADDR,
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID,
|
|
pci_cfgfunc_config_device, { PCMCIA_IO_BASE,
|
|
PCMCIA_IO_BASE,
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_IO }},
|
|
#endif /*CONFIG_PCI_PNP*/
|
|
{ }
|
|
};
|
|
|
|
struct pci_controller hose = {
|
|
#ifndef CONFIG_PCI_PNP
|
|
config_table: pci_cpc45_config_table,
|
|
#endif
|
|
};
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
pci_mpc824x_init(&hose);
|
|
|
|
/* init PCI_to_LOCAL Bus BRIDGE */
|
|
Plx9030Init();
|
|
|
|
/* Clear Display */
|
|
DISP_CWORD = 0x0;
|
|
|
|
sysControlDisplay(0,' ');
|
|
sysControlDisplay(1,'C');
|
|
sysControlDisplay(2,'P');
|
|
sysControlDisplay(3,'C');
|
|
sysControlDisplay(4,' ');
|
|
sysControlDisplay(5,'4');
|
|
sysControlDisplay(6,'5');
|
|
sysControlDisplay(7,' ');
|
|
|
|
}
|
|
|
|
/**************************************************************************
|
|
*
|
|
* sysControlDisplay - controls one of the Alphanum. Display digits.
|
|
*
|
|
* This routine will write an ASCII character to the display digit requested.
|
|
*
|
|
* SEE ALSO:
|
|
*
|
|
* RETURNS: NA
|
|
*/
|
|
|
|
int sysControlDisplay (int digit, /* number of digit 0..7 */
|
|
uchar ascii_code /* ASCII code */
|
|
)
|
|
{
|
|
if ((digit < 0) || (digit > 7))
|
|
return (-1);
|
|
|
|
*((volatile uchar *) (DISP_CHR_RAM + digit)) = ascii_code;
|
|
|
|
return (0);
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_PCMCIA)
|
|
|
|
#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR
|
|
volatile unsigned char *pcmcia_mem = (unsigned char*)CONFIG_SYS_PCMCIA_MEM_ADDR;
|
|
#endif
|
|
|
|
int pcmcia_init(void)
|
|
{
|
|
u_int rc;
|
|
|
|
debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
|
|
|
|
rc = i82365_init();
|
|
|
|
return rc;
|
|
}
|
|
|
|
#endif
|
|
|
|
# ifdef CONFIG_IDE_LED
|
|
void ide_led (uchar led, uchar status)
|
|
{
|
|
u_char val;
|
|
/* We have one PCMCIA slot and use LED H4 for the IDE Interface */
|
|
val = readb(BCSR_BASE + 0x04);
|
|
if (status) { /* led on */
|
|
val |= B_CTRL_LED0;
|
|
} else {
|
|
val &= ~B_CTRL_LED0;
|
|
}
|
|
writeb(val, BCSR_BASE + 0x04);
|
|
}
|
|
# endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
return pci_eth_init(bis);
|
|
}
|