mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
401 lines
7.9 KiB
C
401 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2002
|
|
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
|
|
*/
|
|
|
|
/*
|
|
* Based on sc520cdp.c from rolo 1.6:
|
|
*----------------------------------------------------------------------
|
|
* (C) Copyright 2000
|
|
* Sysgo Real-Time Solutions GmbH
|
|
* Klein-Winternheim, Germany
|
|
*----------------------------------------------------------------------
|
|
*/
|
|
|
|
#include <config.h>
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <ali512x.h>
|
|
|
|
|
|
/* ALI M5123 Logical device numbers:
|
|
* 0 FDC
|
|
* 1 unused?
|
|
* 2 unused?
|
|
* 3 lpt
|
|
* 4 UART1
|
|
* 5 UART2
|
|
* 6 RTC
|
|
* 7 mouse/kbd
|
|
* 8 CIO
|
|
*/
|
|
|
|
/*
|
|
************************************************************
|
|
* Some access primitives for the ALi chip: *
|
|
************************************************************
|
|
*/
|
|
|
|
static void ali_write(u8 index, u8 value)
|
|
{
|
|
/* write an arbirary register */
|
|
outb(index, ALI_INDEX);
|
|
outb(value, ALI_DATA);
|
|
}
|
|
|
|
#if 0
|
|
static int ali_read(u8 index)
|
|
{
|
|
outb(index, ALI_INDEX);
|
|
return inb(ALI_DATA);
|
|
}
|
|
#endif
|
|
|
|
#define ALI_OPEN() \
|
|
outb(0x51, ALI_INDEX); \
|
|
outb(0x23, ALI_INDEX)
|
|
|
|
|
|
#define ALI_CLOSE() \
|
|
outb(0xbb, ALI_INDEX)
|
|
|
|
/* Select a logical device */
|
|
#define ALI_SELDEV(dev) \
|
|
ali_write(0x07, dev)
|
|
|
|
|
|
void ali512x_init(void)
|
|
{
|
|
ALI_OPEN();
|
|
|
|
ali_write(0x02, 0x01); /* soft reset */
|
|
ali_write(0x03, 0x03); /* disable access to CIOs */
|
|
ali_write(0x22, 0x00); /* disable direct powerdown */
|
|
ali_write(0x23, 0x00); /* disable auto powerdown */
|
|
ali_write(0x24, 0x00); /* IR 8 is active hi, pin26 is PDIR */
|
|
|
|
ALI_CLOSE();
|
|
}
|
|
|
|
void ali512x_set_fdc(int enabled, u16 io, u8 irq, u8 dma_channel)
|
|
{
|
|
ALI_OPEN();
|
|
ALI_SELDEV(0);
|
|
|
|
ali_write(0x30, enabled?1:0);
|
|
if (enabled) {
|
|
ali_write(0x60, io >> 8);
|
|
ali_write(0x61, io & 0xff);
|
|
ali_write(0x70, irq);
|
|
ali_write(0x74, dma_channel);
|
|
|
|
/* AT mode, no drive swap */
|
|
ali_write(0xf0, 0x08);
|
|
ali_write(0xf1, 0x00);
|
|
ali_write(0xf2, 0xff);
|
|
ali_write(0xf4, 0x00);
|
|
}
|
|
ALI_CLOSE();
|
|
}
|
|
|
|
|
|
void ali512x_set_pp(int enabled, u16 io, u8 irq, u8 dma_channel)
|
|
{
|
|
ALI_OPEN();
|
|
ALI_SELDEV(3);
|
|
|
|
ali_write(0x30, enabled?1:0);
|
|
if (enabled) {
|
|
ali_write(0x60, io >> 8);
|
|
ali_write(0x61, io & 0xff);
|
|
ali_write(0x70, irq);
|
|
ali_write(0x74, dma_channel);
|
|
|
|
/* mode: EPP 1.9, ECP FIFO threshold = 7, IRQ active low */
|
|
ali_write(0xf0, 0xbc);
|
|
/* 12 MHz, Burst DMA in ECP */
|
|
ali_write(0xf1, 0x05);
|
|
}
|
|
ALI_CLOSE();
|
|
|
|
}
|
|
|
|
void ali512x_set_uart(int enabled, int index, u16 io, u8 irq)
|
|
{
|
|
ALI_OPEN();
|
|
ALI_SELDEV(index?5:4);
|
|
|
|
ali_write(0x30, enabled?1:0);
|
|
if (enabled) {
|
|
ali_write(0x60, io >> 8);
|
|
ali_write(0x61, io & 0xff);
|
|
ali_write(0x70, irq);
|
|
|
|
ali_write(0xf0, 0x00);
|
|
ali_write(0xf1, 0x00);
|
|
|
|
/* huh? write 0xf2 twice - a typo in rolo
|
|
* or some secret ali errata? Who knows?
|
|
*/
|
|
if (index) {
|
|
ali_write(0xf2, 0x00);
|
|
}
|
|
ali_write(0xf2, 0x0c);
|
|
}
|
|
ALI_CLOSE();
|
|
|
|
}
|
|
|
|
void ali512x_set_uart2_irda(int enabled)
|
|
{
|
|
ALI_OPEN();
|
|
ALI_SELDEV(5);
|
|
|
|
ali_write(0xf1, enabled?0x48:0x00); /* fullduplex IrDa */
|
|
ALI_CLOSE();
|
|
|
|
}
|
|
|
|
void ali512x_set_rtc(int enabled, u16 io, u8 irq)
|
|
{
|
|
ALI_OPEN();
|
|
ALI_SELDEV(6);
|
|
|
|
ali_write(0x30, enabled?1:0);
|
|
if (enabled) {
|
|
ali_write(0x60, io >> 8);
|
|
ali_write(0x61, io & 0xff);
|
|
ali_write(0x70, irq);
|
|
|
|
ali_write(0xf0, 0x00);
|
|
}
|
|
ALI_CLOSE();
|
|
}
|
|
|
|
void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
|
|
{
|
|
ALI_OPEN();
|
|
ALI_SELDEV(7);
|
|
|
|
ali_write(0x30, enabled?1:0);
|
|
if (enabled) {
|
|
ali_write(0x70, kbc_irq);
|
|
ali_write(0x72, mouse_irq);
|
|
|
|
ali_write(0xf0, 0x00);
|
|
}
|
|
ALI_CLOSE();
|
|
}
|
|
|
|
|
|
/* Common I/O
|
|
*
|
|
* (This descripotsion is base on several incompete sources
|
|
* since I have not been able to obtain any datasheet for the device
|
|
* there may be some mis-understandings burried in here.
|
|
* -- Daniel daniel@omicron.se)
|
|
*
|
|
* There are 22 CIO pins numbered
|
|
* 10-17
|
|
* 20-25
|
|
* 30-37
|
|
*
|
|
* 20-24 are dedicated CIO pins, the other 17 are muliplexed with
|
|
* other functions.
|
|
*
|
|
* Secondary
|
|
* CIO Pin Function Decription
|
|
* =======================================================
|
|
* CIO10 IRQIN1 Interrupt input 1?
|
|
* CIO11 IRQIN2 Interrupt input 2?
|
|
* CIO12 IRRX IrDa Receive
|
|
* CIO13 IRTX IrDa Transmit
|
|
* CIO14 P21 KBC P21 fucntion
|
|
* CIO15 P20 KBC P21 fucntion
|
|
* CIO16 I2C_CLK I2C Clock
|
|
* CIO17 I2C_DAT I2C Data
|
|
*
|
|
* CIO20 -
|
|
* CIO21 -
|
|
* CIO22 -
|
|
* CIO23 -
|
|
* CIO24 -
|
|
* CIO25 LOCK Keylock
|
|
*
|
|
* CIO30 KBC_CLK Keybaord Clock
|
|
* CIO31 CS0J General Chip Select decoder CS0J
|
|
* CIO32 CS1J General Chip Select decoder CS1J
|
|
* CIO33 ALT_KCLK Alternative Keyboard Clock
|
|
* CIO34 ALT_KDAT Alternative Keyboard Data
|
|
* CIO35 ALT_MCLK Alternative Mouse Clock
|
|
* CIO36 ALT_MDAT Alternative Mouse Data
|
|
* CIO37 ALT_KBC Alternative KBC select
|
|
*
|
|
* The CIO use an indirect address scheme.
|
|
*
|
|
* Reigster 3 in the SIO is used to select the index and data
|
|
* port addresses where the CIO I/O registers show up.
|
|
* The function selection registers are accessible under
|
|
* function SIO 8.
|
|
*
|
|
* SIO reigster 3 (CIO Address Selection) bit definitions:
|
|
* bit 7 CIO index and data registers enabled
|
|
* bit 1-0 CIO indirect registers port address select
|
|
* 0 index = 0xE0 data = 0xE1
|
|
* 1 index = 0xE2 data = 0xE3
|
|
* 2 index = 0xE4 data = 0xE5
|
|
* 3 index = 0xEA data = 0xEB
|
|
*
|
|
* There are three CIO I/O register accessed via CIO index port and CIO data port
|
|
* 0x01 CIO 10-17 data
|
|
* 0x02 CIO 20-25 data (bits 7-6 unused)
|
|
* 0x03 CIO 30-37 data
|
|
*
|
|
*
|
|
* The pin function is accessed through normal
|
|
* SIO registers, each register have the same format:
|
|
*
|
|
* Bit Function Value
|
|
* 0 Input/output 1=input
|
|
* 1 Polarity of signal 1=inverted
|
|
* 2 Unused ??
|
|
* 3 Function (normal or special) 1=special
|
|
* 7-4 Unused
|
|
*
|
|
* SIO REG
|
|
* 0xe0 CIO 10 Config
|
|
* 0xe1 CIO 11 Config
|
|
* 0xe2 CIO 12 Config
|
|
* 0xe3 CIO 13 Config
|
|
* 0xe4 CIO 14 Config
|
|
* 0xe5 CIO 15 Config
|
|
* 0xe6 CIO 16 Config
|
|
* 0xe7 CIO 16 Config
|
|
*
|
|
* 0xe8 CIO 20 Config
|
|
* 0xe9 CIO 21 Config
|
|
* 0xea CIO 22 Config
|
|
* 0xeb CIO 23 Config
|
|
* 0xec CIO 24 Config
|
|
* 0xed CIO 25 Config
|
|
*
|
|
* 0xf5 CIO 30 Config
|
|
* 0xf6 CIO 31 Config
|
|
* 0xf7 CIO 32 Config
|
|
* 0xf8 CIO 33 Config
|
|
* 0xf9 CIO 34 Config
|
|
* 0xfa CIO 35 Config
|
|
* 0xfb CIO 36 Config
|
|
* 0xfc CIO 37 Config
|
|
*
|
|
*/
|
|
|
|
#define ALI_CIO_PORT_SEL 0x83
|
|
#define ALI_CIO_INDEX 0xea
|
|
#define ALI_CIO_DATA 0xeb
|
|
|
|
void ali512x_set_cio(int enabled)
|
|
{
|
|
int i;
|
|
|
|
ALI_OPEN();
|
|
|
|
if (enabled) {
|
|
ali_write(0x3, ALI_CIO_PORT_SEL); /* Enable CIO data register */
|
|
} else {
|
|
ali_write(0x3, ALI_CIO_PORT_SEL & ~0x80);
|
|
}
|
|
|
|
ALI_SELDEV(8);
|
|
|
|
ali_write(0x30, enabled?1:0);
|
|
|
|
/* set all pins to input to start with */
|
|
for (i=0xe0;i<0xee;i++) {
|
|
ali_write(i, 1);
|
|
}
|
|
|
|
for (i=0xf5;i<0xfe;i++) {
|
|
ali_write(i, 1);
|
|
}
|
|
|
|
ALI_CLOSE();
|
|
}
|
|
|
|
|
|
void ali512x_cio_function(int pin, int special, int inv, int input)
|
|
{
|
|
u8 data;
|
|
u8 addr;
|
|
|
|
/* valid pins are 10-17, 20-25 and 30-37 */
|
|
if (pin >= 10 && pin <= 17) {
|
|
addr = 0xe0+(pin&7);
|
|
} else if (pin >= 20 && pin <= 25) {
|
|
addr = 0xe8+(pin&7);
|
|
} else if (pin >= 30 && pin <= 37) {
|
|
addr = 0xf5+(pin&7);
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
ALI_OPEN();
|
|
|
|
ALI_SELDEV(8);
|
|
|
|
|
|
data=0xf4;
|
|
if (special) {
|
|
data |= 0x08;
|
|
} else {
|
|
if (inv) {
|
|
data |= 0x02;
|
|
}
|
|
if (input) {
|
|
data |= 0x01;
|
|
}
|
|
}
|
|
|
|
ali_write(addr, data);
|
|
|
|
ALI_CLOSE();
|
|
}
|
|
|
|
void ali512x_cio_out(int pin, int value)
|
|
{
|
|
u8 reg;
|
|
u8 data;
|
|
u8 bit;
|
|
|
|
reg = pin/10;
|
|
bit = 1 << (pin%10);
|
|
|
|
|
|
outb(reg, ALI_CIO_INDEX); /* select I/O register */
|
|
data = inb(ALI_CIO_DATA);
|
|
if (value) {
|
|
data |= bit;
|
|
} else {
|
|
data &= ~bit;
|
|
}
|
|
outb(data, ALI_CIO_DATA);
|
|
}
|
|
|
|
int ali512x_cio_in(int pin)
|
|
{
|
|
u8 reg;
|
|
u8 data;
|
|
u8 bit;
|
|
|
|
/* valid pins are 10-17, 20-25 and 30-37 */
|
|
reg = pin/10;
|
|
bit = 1 << (pin%10);
|
|
|
|
|
|
outb(reg, ALI_CIO_INDEX); /* select I/O register */
|
|
data = inb(ALI_CIO_DATA);
|
|
|
|
return data & bit;
|
|
}
|