Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 18:10:13 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/ls1021aqds.h
Tom Rini 2f420f135f net: tsec: Remove non-DM_ETH support code 
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.  Doing this removes some board support code
which was also unused. Finally, this removes some CONFIG symbols that
otherwise needed to be migrated to Kconfig, but were unused in code now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00

278 lines
8.2 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE
#ifdef CONFIG_NAND_BOOT
#define CFG_SYS_NAND_U_BOOT_SIZE (400 << 10)
#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#endif
#define SPD_EEPROM_ADDRESS 0x51
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#ifdef CONFIG_DDR_ECC
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#endif
/*
* IFC Definitions
*/
#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
#define CFG_SYS_FLASH_BASE 0x60000000
#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
#define CFG_SYS_NOR0_CSPR_EXT (0x0)
#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \
CSPR_PORT_SIZE_16 | \
CSPR_MSEL_NOR | \
CSPR_V)
#define CFG_SYS_NOR1_CSPR_EXT (0x0)
#define CFG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS \
+ 0x8000000) | \
CSPR_PORT_SIZE_16 | \
CSPR_MSEL_NOR | \
CSPR_V)
#define CFG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
#define CFG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
CSOR_NOR_TRHZ_80)
#define CFG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
FTIM0_NOR_TEADC(0x5) | \
FTIM0_NOR_TEAHC(0x5))
#define CFG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
FTIM1_NOR_TRAD_NOR(0x1a) | \
FTIM1_NOR_TSEQRAD_NOR(0x13))
#define CFG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
FTIM2_NOR_TCH(0x4) | \
FTIM2_NOR_TWPH(0xe) | \
FTIM2_NOR_TWP(0x1c))
#define CFG_SYS_NOR_FTIM3 0
#define CONFIG_FLASH_SHOW_PROGRESS 45
#define CFG_SYS_WRITE_SWAPPED_DATA
#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS, \
CFG_SYS_FLASH_BASE_PHYS + 0x8000000}
/*
* NAND Flash Definitions
*/
#define CFG_SYS_NAND_BASE 0x7e800000
#define CFG_SYS_NAND_BASE_PHYS CFG_SYS_NAND_BASE
#define CFG_SYS_NAND_CSPR_EXT (0x0)
#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
| CSPR_PORT_SIZE_8 \
| CSPR_MSEL_NAND \
| CSPR_V)
#define CFG_SYS_NAND_AMASK IFC_AMASK(64*1024)
#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
| CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \
| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
| CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
| CSOR_NAND_PB(64)) /* 64 Pages Per Block */
#define CFG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \
FTIM0_NAND_TWP(0x18) | \
FTIM0_NAND_TWCHT(0x7) | \
FTIM0_NAND_TWH(0xa))
#define CFG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
FTIM1_NAND_TWBE(0x39) | \
FTIM1_NAND_TRR(0xe) | \
FTIM1_NAND_TRP(0x18))
#define CFG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \
FTIM2_NAND_TREH(0xa) | \
FTIM2_NAND_TWHRE(0x1e))
#define CFG_SYS_NAND_FTIM3 0x0
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
#endif
/*
* QIXIS Definitions
*/
#ifdef CONFIG_FSL_QIXIS
#define QIXIS_BASE 0x7fb00000
#define QIXIS_BASE_PHYS QIXIS_BASE
#define CFG_SYS_I2C_FPGA_ADDR 0x66
#define QIXIS_LBMAP_SWITCH 6
#define QIXIS_LBMAP_MASK 0x0f
#define QIXIS_LBMAP_SHIFT 0
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x04
#define QIXIS_PWR_CTL 0x21
#define QIXIS_PWR_CTL_POWEROFF 0x80
#define QIXIS_RST_CTL_RESET 0x44
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_CTL_SYS 0x5
#define QIXIS_CTL_SYS_EVTSW_MASK 0x0c
#define QIXIS_CTL_SYS_EVTSW_IRQ 0x04
#define QIXIS_RST_FORCE_3 0x45
#define QIXIS_RST_FORCE_3_PCIESLOT1 0x80
#define QIXIS_PWR_CTL2 0x21
#define QIXIS_PWR_CTL2_PCTL 0x2
#define CFG_SYS_FPGA_CSPR_EXT (0x0)
#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
CSPR_PORT_SIZE_8 | \
CSPR_MSEL_GPCM | \
CSPR_V)
#define CFG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
CSOR_NOR_NOR_MODE_AVD_NOR | \
CSOR_NOR_TRHZ_80)
/*
* QIXIS Timing parameters for IFC GPCM
*/
#define CFG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xe) | \
FTIM0_GPCM_TEADC(0xe) | \
FTIM0_GPCM_TEAHC(0xe))
#define CFG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xe) | \
FTIM1_GPCM_TRAD(0x1f))
#define CFG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xe) | \
FTIM2_GPCM_TCH(0xe) | \
FTIM2_GPCM_TWP(0xf0))
#define CFG_SYS_FPGA_FTIM3 0x0
#endif
#if defined(CONFIG_NAND_BOOT)
#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT
#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR
#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK
#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR
#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0
#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1
#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2
#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3
#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT
#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR
#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK
#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR
#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0
#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1
#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2
#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3
#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR1_CSPR_EXT
#define CFG_SYS_CSPR2 CFG_SYS_NOR1_CSPR
#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK
#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR
#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0
#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1
#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2
#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3
#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT
#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR
#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK
#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR
#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0
#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1
#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2
#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3
#else
#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT
#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR
#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR1_CSPR_EXT
#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR
#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK
#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR
#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0
#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1
#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2
#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3
#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT
#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR
#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK
#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR
#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0
#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1
#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2
#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3
#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT
#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR
#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK
#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR
#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0
#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1
#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2
#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3
#endif
/*
* Serial Port
*/
#ifndef CONFIG_LPUART
#define CFG_SYS_NS16550_CLK get_serial_clock()
#endif
/*
* I2C
*/
/* GPIO */
/*
* I2C bus multiplexer
*/
#define I2C_MUX_PCA_ADDR_PRI 0x77
#define I2C_MUX_CH_DEFAULT 0x8
#define I2C_MUX_CH_CH7301 0xC
/*
* MMC
*/
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define HWCONFIG_BUFFER_SIZE 256
#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
"initrd_high=0xffffffff\0" \
"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0" \
"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_SYS_BOOTMAPSZ (256 << 20)
/*
* Environment
*/
#include <asm/fsl_secure_boot.h>
#endif
Reference in a new issue View git blame Copy permalink