u-boot/configs/evb-rk3036_defconfig
Tuomas Tynkkynen ad12dc1844 cmd: Toggle the default value of CONFIG_CMD_IMLS
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:

../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
   i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10 17:51:04 -04:00

52 lines
1.3 KiB
Text

CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ROCKCHIP_RK3036=y
CONFIG_TARGET_EVB_RK3036=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
CONFIG_DEBUG_UART=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x0
# CONFIG_ANDROID_BOOT_IMAGE is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_PARTITION_UUIDS=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_LED=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ROCKCHIP_RK3036=y
# CONFIG_SPL_DM_SERIAL is not set
CONFIG_DEBUG_UART_BASE=0x20068000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
CONFIG_USB_GADGET_VENDOR_NUM=0x2207
CONFIG_USB_GADGET_PRODUCT_NUM=0x310a
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y