mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
e7e05fcb3e
Disable and free clock when remove driver. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
564 lines
13 KiB
C
564 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Designware master SPI core controller driver
|
|
*
|
|
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
|
|
*
|
|
* Very loosely based on the Linux driver:
|
|
* drivers/spi/spi-dw.c, which is:
|
|
* Copyright (c) 2009, Intel Corporation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <fdtdec.h>
|
|
#include <reset.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/iopoll.h>
|
|
#include <asm/io.h>
|
|
|
|
/* Register offsets */
|
|
#define DW_SPI_CTRL0 0x00
|
|
#define DW_SPI_CTRL1 0x04
|
|
#define DW_SPI_SSIENR 0x08
|
|
#define DW_SPI_MWCR 0x0c
|
|
#define DW_SPI_SER 0x10
|
|
#define DW_SPI_BAUDR 0x14
|
|
#define DW_SPI_TXFLTR 0x18
|
|
#define DW_SPI_RXFLTR 0x1c
|
|
#define DW_SPI_TXFLR 0x20
|
|
#define DW_SPI_RXFLR 0x24
|
|
#define DW_SPI_SR 0x28
|
|
#define DW_SPI_IMR 0x2c
|
|
#define DW_SPI_ISR 0x30
|
|
#define DW_SPI_RISR 0x34
|
|
#define DW_SPI_TXOICR 0x38
|
|
#define DW_SPI_RXOICR 0x3c
|
|
#define DW_SPI_RXUICR 0x40
|
|
#define DW_SPI_MSTICR 0x44
|
|
#define DW_SPI_ICR 0x48
|
|
#define DW_SPI_DMACR 0x4c
|
|
#define DW_SPI_DMATDLR 0x50
|
|
#define DW_SPI_DMARDLR 0x54
|
|
#define DW_SPI_IDR 0x58
|
|
#define DW_SPI_VERSION 0x5c
|
|
#define DW_SPI_DR 0x60
|
|
|
|
/* Bit fields in CTRLR0 */
|
|
#define SPI_DFS_OFFSET 0
|
|
|
|
#define SPI_FRF_OFFSET 4
|
|
#define SPI_FRF_SPI 0x0
|
|
#define SPI_FRF_SSP 0x1
|
|
#define SPI_FRF_MICROWIRE 0x2
|
|
#define SPI_FRF_RESV 0x3
|
|
|
|
#define SPI_MODE_OFFSET 6
|
|
#define SPI_SCPH_OFFSET 6
|
|
#define SPI_SCOL_OFFSET 7
|
|
|
|
#define SPI_TMOD_OFFSET 8
|
|
#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
|
|
#define SPI_TMOD_TR 0x0 /* xmit & recv */
|
|
#define SPI_TMOD_TO 0x1 /* xmit only */
|
|
#define SPI_TMOD_RO 0x2 /* recv only */
|
|
#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
|
|
|
|
#define SPI_SLVOE_OFFSET 10
|
|
#define SPI_SRL_OFFSET 11
|
|
#define SPI_CFS_OFFSET 12
|
|
|
|
/* Bit fields in SR, 7 bits */
|
|
#define SR_MASK GENMASK(6, 0) /* cover 7 bits */
|
|
#define SR_BUSY BIT(0)
|
|
#define SR_TF_NOT_FULL BIT(1)
|
|
#define SR_TF_EMPT BIT(2)
|
|
#define SR_RF_NOT_EMPT BIT(3)
|
|
#define SR_RF_FULL BIT(4)
|
|
#define SR_TX_ERR BIT(5)
|
|
#define SR_DCOL BIT(6)
|
|
|
|
#define RX_TIMEOUT 1000 /* timeout in ms */
|
|
|
|
struct dw_spi_platdata {
|
|
s32 frequency; /* Default clock frequency, -1 for none */
|
|
void __iomem *regs;
|
|
};
|
|
|
|
struct dw_spi_priv {
|
|
void __iomem *regs;
|
|
unsigned int freq; /* Default frequency */
|
|
unsigned int mode;
|
|
struct clk clk;
|
|
unsigned long bus_clk_rate;
|
|
|
|
struct gpio_desc cs_gpio; /* External chip-select gpio */
|
|
|
|
int bits_per_word;
|
|
u8 cs; /* chip select pin */
|
|
u8 tmode; /* TR/TO/RO/EEPROM */
|
|
u8 type; /* SPI/SSP/MicroWire */
|
|
int len;
|
|
|
|
u32 fifo_len; /* depth of the FIFO buffer */
|
|
void *tx;
|
|
void *tx_end;
|
|
void *rx;
|
|
void *rx_end;
|
|
|
|
struct reset_ctl_bulk resets;
|
|
};
|
|
|
|
static inline u32 dw_read(struct dw_spi_priv *priv, u32 offset)
|
|
{
|
|
return __raw_readl(priv->regs + offset);
|
|
}
|
|
|
|
static inline void dw_write(struct dw_spi_priv *priv, u32 offset, u32 val)
|
|
{
|
|
__raw_writel(val, priv->regs + offset);
|
|
}
|
|
|
|
static int request_gpio_cs(struct udevice *bus)
|
|
{
|
|
#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_SPL_BUILD)
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
/* External chip select gpio line is optional */
|
|
ret = gpio_request_by_name(bus, "cs-gpio", 0, &priv->cs_gpio, 0);
|
|
if (ret == -ENOENT)
|
|
return 0;
|
|
|
|
if (ret < 0) {
|
|
printf("Error: %d: Can't get %s gpio!\n", ret, bus->name);
|
|
return ret;
|
|
}
|
|
|
|
if (dm_gpio_is_valid(&priv->cs_gpio)) {
|
|
dm_gpio_set_dir_flags(&priv->cs_gpio,
|
|
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
|
|
}
|
|
|
|
debug("%s: used external gpio for CS management\n", __func__);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int dw_spi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct dw_spi_platdata *plat = bus->platdata;
|
|
|
|
plat->regs = (struct dw_spi *)devfdt_get_addr(bus);
|
|
|
|
/* Use 500KHz as a suitable default */
|
|
plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
|
|
500000);
|
|
debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs,
|
|
plat->frequency);
|
|
|
|
return request_gpio_cs(bus);
|
|
}
|
|
|
|
static inline void spi_enable_chip(struct dw_spi_priv *priv, int enable)
|
|
{
|
|
dw_write(priv, DW_SPI_SSIENR, (enable ? 1 : 0));
|
|
}
|
|
|
|
/* Restart the controller, disable all interrupts, clean rx fifo */
|
|
static void spi_hw_init(struct dw_spi_priv *priv)
|
|
{
|
|
spi_enable_chip(priv, 0);
|
|
dw_write(priv, DW_SPI_IMR, 0xff);
|
|
spi_enable_chip(priv, 1);
|
|
|
|
/*
|
|
* Try to detect the FIFO depth if not set by interface driver,
|
|
* the depth could be from 2 to 256 from HW spec
|
|
*/
|
|
if (!priv->fifo_len) {
|
|
u32 fifo;
|
|
|
|
for (fifo = 1; fifo < 256; fifo++) {
|
|
dw_write(priv, DW_SPI_TXFLTR, fifo);
|
|
if (fifo != dw_read(priv, DW_SPI_TXFLTR))
|
|
break;
|
|
}
|
|
|
|
priv->fifo_len = (fifo == 1) ? 0 : fifo;
|
|
dw_write(priv, DW_SPI_TXFLTR, 0);
|
|
}
|
|
debug("%s: fifo_len=%d\n", __func__, priv->fifo_len);
|
|
}
|
|
|
|
/*
|
|
* We define dw_spi_get_clk function as 'weak' as some targets
|
|
* (like SOCFPGA_GEN5 and SOCFPGA_ARRIA10) don't use standard clock API
|
|
* and implement dw_spi_get_clk their own way in their clock manager.
|
|
*/
|
|
__weak int dw_spi_get_clk(struct udevice *bus, ulong *rate)
|
|
{
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(bus, 0, &priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret && ret != -ENOSYS && ret != -ENOTSUPP)
|
|
return ret;
|
|
|
|
*rate = clk_get_rate(&priv->clk);
|
|
if (!*rate)
|
|
goto err_rate;
|
|
|
|
debug("%s: get spi controller clk via device tree: %lu Hz\n",
|
|
__func__, *rate);
|
|
|
|
return 0;
|
|
|
|
err_rate:
|
|
clk_disable(&priv->clk);
|
|
clk_free(&priv->clk);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int dw_spi_reset(struct udevice *bus)
|
|
{
|
|
int ret;
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
ret = reset_get_bulk(bus, &priv->resets);
|
|
if (ret) {
|
|
/*
|
|
* Return 0 if error due to !CONFIG_DM_RESET and reset
|
|
* DT property is not present.
|
|
*/
|
|
if (ret == -ENOENT || ret == -ENOTSUPP)
|
|
return 0;
|
|
|
|
dev_warn(bus, "Can't get reset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_deassert_bulk(&priv->resets);
|
|
if (ret) {
|
|
reset_release_bulk(&priv->resets);
|
|
dev_err(bus, "Failed to reset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_spi_probe(struct udevice *bus)
|
|
{
|
|
struct dw_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
priv->regs = plat->regs;
|
|
priv->freq = plat->frequency;
|
|
|
|
ret = dw_spi_get_clk(bus, &priv->bus_clk_rate);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dw_spi_reset(bus);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Currently only bits_per_word == 8 supported */
|
|
priv->bits_per_word = 8;
|
|
|
|
priv->tmode = 0; /* Tx & Rx */
|
|
|
|
/* Basic HW init */
|
|
spi_hw_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Return the max entries we can fill into tx fifo */
|
|
static inline u32 tx_max(struct dw_spi_priv *priv)
|
|
{
|
|
u32 tx_left, tx_room, rxtx_gap;
|
|
|
|
tx_left = (priv->tx_end - priv->tx) / (priv->bits_per_word >> 3);
|
|
tx_room = priv->fifo_len - dw_read(priv, DW_SPI_TXFLR);
|
|
|
|
/*
|
|
* Another concern is about the tx/rx mismatch, we
|
|
* thought about using (priv->fifo_len - rxflr - txflr) as
|
|
* one maximum value for tx, but it doesn't cover the
|
|
* data which is out of tx/rx fifo and inside the
|
|
* shift registers. So a control from sw point of
|
|
* view is taken.
|
|
*/
|
|
rxtx_gap = ((priv->rx_end - priv->rx) - (priv->tx_end - priv->tx)) /
|
|
(priv->bits_per_word >> 3);
|
|
|
|
return min3(tx_left, tx_room, (u32)(priv->fifo_len - rxtx_gap));
|
|
}
|
|
|
|
/* Return the max entries we should read out of rx fifo */
|
|
static inline u32 rx_max(struct dw_spi_priv *priv)
|
|
{
|
|
u32 rx_left = (priv->rx_end - priv->rx) / (priv->bits_per_word >> 3);
|
|
|
|
return min_t(u32, rx_left, dw_read(priv, DW_SPI_RXFLR));
|
|
}
|
|
|
|
static void dw_writer(struct dw_spi_priv *priv)
|
|
{
|
|
u32 max = tx_max(priv);
|
|
u16 txw = 0;
|
|
|
|
while (max--) {
|
|
/* Set the tx word if the transfer's original "tx" is not null */
|
|
if (priv->tx_end - priv->len) {
|
|
if (priv->bits_per_word == 8)
|
|
txw = *(u8 *)(priv->tx);
|
|
else
|
|
txw = *(u16 *)(priv->tx);
|
|
}
|
|
dw_write(priv, DW_SPI_DR, txw);
|
|
debug("%s: tx=0x%02x\n", __func__, txw);
|
|
priv->tx += priv->bits_per_word >> 3;
|
|
}
|
|
}
|
|
|
|
static void dw_reader(struct dw_spi_priv *priv)
|
|
{
|
|
u32 max = rx_max(priv);
|
|
u16 rxw;
|
|
|
|
while (max--) {
|
|
rxw = dw_read(priv, DW_SPI_DR);
|
|
debug("%s: rx=0x%02x\n", __func__, rxw);
|
|
|
|
/* Care about rx if the transfer's original "rx" is not null */
|
|
if (priv->rx_end - priv->len) {
|
|
if (priv->bits_per_word == 8)
|
|
*(u8 *)(priv->rx) = rxw;
|
|
else
|
|
*(u16 *)(priv->rx) = rxw;
|
|
}
|
|
priv->rx += priv->bits_per_word >> 3;
|
|
}
|
|
}
|
|
|
|
static int poll_transfer(struct dw_spi_priv *priv)
|
|
{
|
|
do {
|
|
dw_writer(priv);
|
|
dw_reader(priv);
|
|
} while (priv->rx_end > priv->rx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We define external_cs_manage function as 'weak' as some targets
|
|
* (like MSCC Ocelot) don't control the external CS pin using a GPIO
|
|
* controller. These SoCs use specific registers to control by
|
|
* software the SPI pins (and especially the CS).
|
|
*/
|
|
__weak void external_cs_manage(struct udevice *dev, bool on)
|
|
{
|
|
#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_SPL_BUILD)
|
|
struct dw_spi_priv *priv = dev_get_priv(dev->parent);
|
|
|
|
if (!dm_gpio_is_valid(&priv->cs_gpio))
|
|
return;
|
|
|
|
dm_gpio_set_value(&priv->cs_gpio, on ? 1 : 0);
|
|
#endif
|
|
}
|
|
|
|
static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
const u8 *tx = dout;
|
|
u8 *rx = din;
|
|
int ret = 0;
|
|
u32 cr0 = 0;
|
|
u32 val;
|
|
u32 cs;
|
|
|
|
/* spi core configured to do 8 bit transfers */
|
|
if (bitlen % 8) {
|
|
debug("Non byte aligned SPI transfer.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Start the transaction if necessary. */
|
|
if (flags & SPI_XFER_BEGIN)
|
|
external_cs_manage(dev, false);
|
|
|
|
cr0 = (priv->bits_per_word - 1) | (priv->type << SPI_FRF_OFFSET) |
|
|
(priv->mode << SPI_MODE_OFFSET) |
|
|
(priv->tmode << SPI_TMOD_OFFSET);
|
|
|
|
if (rx && tx)
|
|
priv->tmode = SPI_TMOD_TR;
|
|
else if (rx)
|
|
priv->tmode = SPI_TMOD_RO;
|
|
else
|
|
/*
|
|
* In transmit only mode (SPI_TMOD_TO) input FIFO never gets
|
|
* any data which breaks our logic in poll_transfer() above.
|
|
*/
|
|
priv->tmode = SPI_TMOD_TR;
|
|
|
|
cr0 &= ~SPI_TMOD_MASK;
|
|
cr0 |= (priv->tmode << SPI_TMOD_OFFSET);
|
|
|
|
priv->len = bitlen >> 3;
|
|
debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len);
|
|
|
|
priv->tx = (void *)tx;
|
|
priv->tx_end = priv->tx + priv->len;
|
|
priv->rx = rx;
|
|
priv->rx_end = priv->rx + priv->len;
|
|
|
|
/* Disable controller before writing control registers */
|
|
spi_enable_chip(priv, 0);
|
|
|
|
debug("%s: cr0=%08x\n", __func__, cr0);
|
|
/* Reprogram cr0 only if changed */
|
|
if (dw_read(priv, DW_SPI_CTRL0) != cr0)
|
|
dw_write(priv, DW_SPI_CTRL0, cr0);
|
|
|
|
/*
|
|
* Configure the desired SS (slave select 0...3) in the controller
|
|
* The DW SPI controller will activate and deactivate this CS
|
|
* automatically. So no cs_activate() etc is needed in this driver.
|
|
*/
|
|
cs = spi_chip_select(dev);
|
|
dw_write(priv, DW_SPI_SER, 1 << cs);
|
|
|
|
/* Enable controller after writing control registers */
|
|
spi_enable_chip(priv, 1);
|
|
|
|
/* Start transfer in a polling loop */
|
|
ret = poll_transfer(priv);
|
|
|
|
/*
|
|
* Wait for current transmit operation to complete.
|
|
* Otherwise if some data still exists in Tx FIFO it can be
|
|
* silently flushed, i.e. dropped on disabling of the controller,
|
|
* which happens when writing 0 to DW_SPI_SSIENR which happens
|
|
* in the beginning of new transfer.
|
|
*/
|
|
if (readl_poll_timeout(priv->regs + DW_SPI_SR, val,
|
|
(val & SR_TF_EMPT) && !(val & SR_BUSY),
|
|
RX_TIMEOUT * 1000)) {
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
|
|
/* Stop the transaction if necessary */
|
|
if (flags & SPI_XFER_END)
|
|
external_cs_manage(dev, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct dw_spi_platdata *plat = bus->platdata;
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
u16 clk_div;
|
|
|
|
if (speed > plat->frequency)
|
|
speed = plat->frequency;
|
|
|
|
/* Disable controller before writing control registers */
|
|
spi_enable_chip(priv, 0);
|
|
|
|
/* clk_div doesn't support odd number */
|
|
clk_div = priv->bus_clk_rate / speed;
|
|
clk_div = (clk_div + 1) & 0xfffe;
|
|
dw_write(priv, DW_SPI_BAUDR, clk_div);
|
|
|
|
/* Enable controller after writing control registers */
|
|
spi_enable_chip(priv, 1);
|
|
|
|
priv->freq = speed;
|
|
debug("%s: regs=%p speed=%d clk_div=%d\n", __func__, priv->regs,
|
|
priv->freq, clk_div);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/*
|
|
* Can't set mode yet. Since this depends on if rx, tx, or
|
|
* rx & tx is requested. So we have to defer this to the
|
|
* real transfer function.
|
|
*/
|
|
priv->mode = mode;
|
|
debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_spi_remove(struct udevice *bus)
|
|
{
|
|
struct dw_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
ret = reset_release_bulk(&priv->resets);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_disable(&priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_free(&priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops dw_spi_ops = {
|
|
.xfer = dw_spi_xfer,
|
|
.set_speed = dw_spi_set_speed,
|
|
.set_mode = dw_spi_set_mode,
|
|
/*
|
|
* cs_info is not needed, since we require all chip selects to be
|
|
* in the device tree explicitly
|
|
*/
|
|
};
|
|
|
|
static const struct udevice_id dw_spi_ids[] = {
|
|
{ .compatible = "snps,dw-apb-ssi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dw_spi) = {
|
|
.name = "dw_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = dw_spi_ids,
|
|
.ops = &dw_spi_ops,
|
|
.ofdata_to_platdata = dw_spi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct dw_spi_priv),
|
|
.probe = dw_spi_probe,
|
|
.remove = dw_spi_remove,
|
|
};
|