u-boot/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
Peng Fan ee106eda7e imx: imx8mm_beacon: enable pinctrl_wdog in SPL
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-06-14 21:33:13 +02:00

110 lines
1.1 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2020 Compass Electronics Group, LLC
*/
#include "imx8mm-u-boot.dtsi"
/ {
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
u-boot,dm-spl;
};
};
&reg_usdhc2_vmmc {
u-boot,off-on-delay-us = <20000>;
};
&fec1 {
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
&gpio1 {
u-boot,dm-spl;
};
&gpio2 {
u-boot,dm-spl;
};
&gpio3 {
u-boot,dm-spl;
};
&gpio4 {
u-boot,dm-spl;
};
&gpio5 {
u-boot,dm-spl;
};
&pca6416_0 {
compatible = "ti,tca6416";
};
&pca6416_1 {
compatible = "ti,tca6416";
};
&pinctrl_i2c1 {
u-boot,dm-spl;
};
&pinctrl_pmic {
u-boot,dm-spl;
};
&pinctrl_uart2 {
u-boot,dm-spl;
};
&pinctrl_usdhc2_gpio {
u-boot,dm-spl;
};
&pinctrl_usdhc2 {
u-boot,dm-spl;
};
&pinctrl_usdhc3 {
u-boot,dm-spl;
};
&pinctrl_wdog {
u-boot,dm-spl;
};
&uart2 {
u-boot,dm-spl;
};
&usbotg1 {
dr_mode="host";
};
&usdhc2 {
u-boot,dm-spl;
};
&usdhc3 {
u-boot,dm-spl;
};
&i2c1 {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} {
u-boot,dm-spl;
};
&wdog1 {
u-boot,dm-spl;
};