mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 14:14:32 +00:00
7803a5bda9
AM64 EVM board has a micro USB 2.0 AB connector and the USB0_VBUS is connected with a resistor divider in between. USB0_DRVVBUS pin is muxed between USB0_DRVVBUS and GPIO1_79 signals. Add the corresponding properties and set the pinmux mode for USB subsystem in the evm dts file. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-7-a-govindraju@ti.com
357 lines
8.8 KiB
Text
357 lines
8.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
#include "k3-am642.dtsi"
|
|
|
|
/ {
|
|
compatible = "ti,am642-evm", "ti,am642";
|
|
model = "Texas Instruments AM642 EVM";
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
/* 2G RAM */
|
|
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
|
|
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
secure_ddr: optee@9e800000 {
|
|
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
|
|
alignment = <0x1000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
evm_12v0: fixedregulator-evm12v0 {
|
|
/* main DC jack */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "evm_12v0";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsys_5v0: fixedregulator-vsys5v0 {
|
|
/* output of LM5140 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys_5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&evm_12v0>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsys_3v3: fixedregulator-vsys3v3 {
|
|
/* output of LM5140 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&evm_12v0>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_mmc1: fixed-regulator-sd {
|
|
/* TPS2051BD */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_mmc1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
vin-supply = <&vsys_3v3>;
|
|
gpio = <&exp1 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vddb: fixedregulator-vddb {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vddb_3v3_display";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vsys_3v3>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "am64-evm:red:heartbeat";
|
|
gpios = <&exp1 16 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
mdio_mux: mux-controller {
|
|
compatible = "gpio-mux";
|
|
#mux-control-cells = <0>;
|
|
|
|
mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
mdio-mux-1 {
|
|
compatible = "mdio-mux-multiplexer";
|
|
mux-controls = <&mdio_mux>;
|
|
mdio-parent-bus = <&cpsw3g_mdio>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mdio@1 {
|
|
reg = <0x1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpsw3g_phy3: ethernet-phy@3 {
|
|
reg = <3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
main_mmc1_pins_default: main-mmc1-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
|
|
AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
|
|
AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
|
|
AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
|
|
AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
|
|
AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
|
|
AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
|
|
AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */
|
|
AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */
|
|
>;
|
|
};
|
|
|
|
main_uart0_pins_default: main-uart0-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
|
|
AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
|
|
AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
|
|
AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
|
|
>;
|
|
};
|
|
|
|
main_i2c1_pins_default: main-i2c1-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
|
|
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
|
|
>;
|
|
};
|
|
|
|
mdio1_pins_default: mdio1-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
|
|
AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
|
|
>;
|
|
};
|
|
|
|
rgmii1_pins_default: rgmii1-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
|
|
AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
|
|
AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
|
|
AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
|
|
AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
|
|
AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
|
|
AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
|
|
AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
|
|
AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
|
|
AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
|
|
AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
|
|
AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
|
|
>;
|
|
};
|
|
|
|
rgmii2_pins_default: rgmii2-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
|
|
AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
|
|
AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
|
|
AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
|
|
AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
|
|
AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
|
|
AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
|
|
AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
|
|
AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
|
|
AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
|
|
AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
|
|
AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
|
|
>;
|
|
};
|
|
|
|
main_usb0_pins_default: main-usb0-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_uart0_pins_default>;
|
|
};
|
|
|
|
/* main_uart1 is reserved for firmware usage */
|
|
&main_uart1 {
|
|
status = "reserved";
|
|
};
|
|
|
|
&main_uart2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcu_uart0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcu_uart1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c1_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp1: gpio@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL",
|
|
"GPIO_CPSW1_RST", "GPIO_RGMII1_RST",
|
|
"GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT",
|
|
"MMC1_SD_EN", "FSI_FET_SEL",
|
|
"MCAN0_STB_3V3", "MCAN1_STB_3V3",
|
|
"CPSW_FET_SEL", "CPSW_FET2_SEL",
|
|
"PRG1_RGMII2_FET_SEL", "TEST_GPIO2",
|
|
"GPIO_OLED_RESETn", "VPP_LDO_EN",
|
|
"TEST_LED1", "TP92", "TP90", "TP88",
|
|
"TP87", "TP86", "TP89", "TP91";
|
|
};
|
|
|
|
/* osd9616p0899-10 */
|
|
display@3c {
|
|
compatible = "solomon,ssd1306fb-i2c";
|
|
reg = <0x3c>;
|
|
reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>;
|
|
vbat-supply = <&vddb>;
|
|
solomon,height = <16>;
|
|
solomon,width = <96>;
|
|
solomon,com-seq;
|
|
solomon,com-invdir;
|
|
solomon,page-offset = <0>;
|
|
solomon,prechargep1 = <2>;
|
|
solomon,prechargep2 = <13>;
|
|
};
|
|
};
|
|
|
|
&mcu_i2c0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcu_i2c1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcu_spi0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcu_spi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&cpsw3g {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio1_pins_default
|
|
&rgmii1_pins_default
|
|
&rgmii2_pins_default>;
|
|
};
|
|
|
|
&cpsw_port1 {
|
|
phy-mode = "rgmii-rxid";
|
|
phy-handle = <&cpsw3g_phy0>;
|
|
};
|
|
|
|
&cpsw_port2 {
|
|
phy-mode = "rgmii-rxid";
|
|
phy-handle = <&cpsw3g_phy3>;
|
|
};
|
|
|
|
&cpsw3g_mdio {
|
|
cpsw3g_phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
};
|
|
};
|
|
|
|
&sdhci0 {
|
|
/* emmc */
|
|
bus-width = <8>;
|
|
non-removable;
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
};
|
|
|
|
&sdhci1 {
|
|
/* SD/MMC */
|
|
vmmc-supply = <&vdd_mmc1>;
|
|
pinctrl-names = "default";
|
|
bus-width = <4>;
|
|
pinctrl-0 = <&main_mmc1_pins_default>;
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
};
|
|
|
|
&usbss0 {
|
|
ti,vbus-divider;
|
|
ti,usb2-only;
|
|
};
|
|
|
|
&usb0 {
|
|
dr_mode = "otg";
|
|
maximum-speed = "high-speed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_usb0_pins_default>;
|
|
};
|