u-boot/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
Marek Vasut be1e9dc080 ARM: renesas: Enable R8A66597 USB host on GR Peach
Enable USB host support on GR Peach board.

To use USB host on GR Peach, it might be necessary to solder JP3 header
onto the board first and then short it. Shorting JP3 is mandatory to let
the U5 regulator to supply VBUS to the CN3 USB port.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:37 +02:00

92 lines
1.6 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source extras for U-Boot for the GR Peach board
*
* Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com>
*/
#include "r7s72100-gr-peach.dts"
/ {
aliases {
spi0 = &rpc;
};
soc {
u-boot,dm-pre-reloc;
};
leds {
led1 {
label = "peach:bottom:red";
};
led-red {
label = "peach:tri:red";
gpios = <&port6 13 GPIO_ACTIVE_HIGH>;
};
led-green {
label = "peach:tri:green";
gpios = <&port6 14 GPIO_ACTIVE_HIGH>;
};
led-blue {
label = "peach:tri:blue";
gpios = <&port6 15 GPIO_ACTIVE_HIGH>;
};
};
reg_usbhs0_vbus: regulator-usbhs0-vbus {
compatible = "regulator-fixed";
regulator-name = "usbhs0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&port4 1 GPIO_ACTIVE_LOW>;
};
rpc: rpc@0xee200000 {
compatible = "renesas,rpc-r7s72100", "renesas,rpc";
reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>;
bank-width = <2>;
num-cs = <1>;
status = "okay";
spi-max-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <0>;
flash0: spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
reg = <0>;
status = "okay";
};
};
};
&ostm0 {
u-boot,dm-pre-reloc;
};
&pinctrl {
u-boot,dm-pre-reloc;
};
&scif2 {
u-boot,dm-pre-reloc;
clock = <66666666>; /* ToDo: Replace by DM clock driver */
};
&scif2_pins {
u-boot,dm-pre-reloc;
};
&usbhs0 {
vbus-supply = <&reg_usbhs0_vbus>;
status = "okay";
};