mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-23 08:01:59 +00:00
5d6a64f71d
This converts removes the following symbols: CONFIG_HAS_ETH0 CONFIG_HAS_ETH1 CONFIG_HAS_ETH2 CONFIG_HAS_ETH3 This is because at this point, only the ids8313 platform was using the code which was controlled by these symbols. In turn, this code already performs error checking on being able to perform the device tree fixup. Rather than convert these to Kconfig for a single platform, update the code to not need these checks and remove them from all the platforms they were unused on. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
196 lines
5.5 KiB
C
196 lines
5.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2019 NXP
|
|
* Copyright 2022 Linaro
|
|
*/
|
|
|
|
#ifndef __IMX8MP_RSB3720_H
|
|
#define __IMX8MP_RSB3720_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <linux/stringify.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
|
|
|
|
#define CONFIG_SPL_MAX_SIZE (152 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_STACK 0x960000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
|
|
|
|
#define CONFIG_MALLOC_F_ADDR 0x184000 /* malloc f used before \
|
|
* GD_FLG_FULL_MALLOC_INIT \
|
|
* set \
|
|
*/
|
|
|
|
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
|
|
|
|
#if defined(CONFIG_NAND_BOOT)
|
|
#define CONFIG_SPL_NAND_MXS
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/* ENET Config */
|
|
/* ENET1 */
|
|
#if defined(CONFIG_CMD_NET)
|
|
#define CONFIG_ETHPRIME "eth1" /* Set eqos to primary since we use its MDIO */
|
|
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 4
|
|
#define FEC_QUIRK_ENET_MAC
|
|
|
|
#define DWC_NET_PHYADDR 4
|
|
#ifdef CONFIG_DWC_ETH_QOS
|
|
#define CONFIG_SYS_NONCACHED_MEMORY (1 * SZ_1M) /* 1M */
|
|
#endif
|
|
|
|
#define PHY_ANEG_TIMEOUT 20000
|
|
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_MMC)
|
|
# define BOOT_TARGET_MMC(func) \
|
|
func(MMC, mmc, 2) \
|
|
func(MMC, mmc, 1)
|
|
#else
|
|
# define BOOT_TARGET_MMC(func)
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_PXE)
|
|
# define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
|
|
#else
|
|
# define BOOT_TARGET_PXE(func)
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_DHCP)
|
|
# define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
|
|
#else
|
|
# define BOOT_TARGET_DHCP(func)
|
|
#endif
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_MMC(func) \
|
|
BOOT_TARGET_PXE(func) \
|
|
BOOT_TARGET_DHCP(func)
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BOOTENV \
|
|
"script=boot.scr\0" \
|
|
"image=Image\0" \
|
|
"splashimage=0x50000000\0" \
|
|
"console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \
|
|
"fdt_addr=0x43000000\0" \
|
|
"fdt_addr_r=0x43000000\0" \
|
|
"boot_fit=no\0" \
|
|
"dfu_alt_info=mmc 2=flash-bin raw 0 0x1B00 mmcpart 1\0" \
|
|
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"initrd_addr=0x43800000\0" \
|
|
"bootm_size=0x10000000\0" \
|
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
|
"mmcpart=1\0" \
|
|
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
|
"mmcautodetect=yes\0" \
|
|
"mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
|
|
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"kernel_addr_r=0x40480000\0" \
|
|
"pxefile_addr_r=0x40480000\0" \
|
|
"ramdisk_addr_r=0x43800000\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
|
|
"bootm ${loadaddr}; " \
|
|
"else " \
|
|
"if run loadfdt; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi;\0" \
|
|
"netargs=setenv bootargs ${jh_clk} console=${console} " \
|
|
"root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run netargs; " \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"${get_cmd} ${loadaddr} ${image}; " \
|
|
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
|
|
"bootm ${loadaddr}; " \
|
|
"else " \
|
|
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi;\0"
|
|
|
|
/* Link Definitions */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
|
|
|
|
/* Totally 6GB or 4G DDR */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
#define PHYS_SDRAM 0x40000000
|
|
#if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G)
|
|
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3 GB */
|
|
#define PHYS_SDRAM_2 0x100000000
|
|
#define PHYS_SDRAM_2_SIZE 0xC0000000 /* 3 GB */
|
|
#elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)
|
|
#define PHYS_SDRAM_SIZE 0x80000000 /* 2 GB */
|
|
#define PHYS_SDRAM_2 0xC0000000
|
|
#define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */
|
|
#endif
|
|
|
|
#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 2048
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
#ifdef CONFIG_FSL_FSPI
|
|
#define FSL_FSPI_FLASH_SIZE SZ_32M
|
|
#define FSL_FSPI_FLASH_NUM 1
|
|
#define FSPI0_BASE_ADDR 0x30bb0000
|
|
#define FSPI0_AMBA_BASE 0x0
|
|
#define CONFIG_FSPI_QUAD_SUPPORT
|
|
|
|
#define CONFIG_SYS_FSL_FSPI_AHB
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_MXS
|
|
|
|
/* NAND stuff */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x20000000
|
|
#endif /* CONFIG_NAND_MXS */
|
|
|
|
#endif /* __IMX8MP_RSB3720_H */
|