mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-29 02:42:16 +00:00
5d68d2f41d
This converts the following to Kconfig: CONFIG_SYS_FLASH_ERASE_TOUT CONFIG_SYS_FLASH_LOCK_TOUT CONFIG_SYS_FLASH_UNLOCK_TOUT CONFIG_SYS_FLASH_WRITE_TOUT In practice, for two m68k platforms we move to hard-coding with a comment the timeout values, rather than try and make convoluted Kconfig logic. We add options for the write and erase options to the pic32 flash driver, as this driver does make use of them. Everywhere else these are unreferenced values. Signed-off-by: Tom Rini <trini@konsulko.com>
92 lines
2.7 KiB
C
92 lines
2.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2010-2017 CS Systemes d'Information
|
|
* Christophe Leroy <christophe.leroy@c-s.fr>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* High Level Configuration Options */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"sdram_type=SDRAM\0" \
|
|
"flash_type=AM29LV160DB\0" \
|
|
"loadaddr=0x400000\0" \
|
|
"filename=uImage.lzma\0" \
|
|
"nfsroot=/opt/ofs\0" \
|
|
"dhcp_ip=ip=:::::eth0:dhcp\0" \
|
|
"console_args=console=ttyCPM0,115200N8\0" \
|
|
"flashboot=setenv bootargs " \
|
|
"${console_args} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"mcr3k:eth0:off;" \
|
|
"${ofl_args}; " \
|
|
"bootm 0x04060000 - 0x04050000\0" \
|
|
"tftpboot=setenv bootargs " \
|
|
"${console_args} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"mcr3k:eth0:off " \
|
|
"${ofl_args}; " \
|
|
"tftp ${loadaddr} ${filename};" \
|
|
"tftp 0xf00000 mcr3000.dtb;" \
|
|
"bootm ${loadaddr} - 0xf00000\0" \
|
|
"netboot=dhcp ${loadaddr} ${filename};" \
|
|
"tftp 0xf00000 mcr3000.dtb;" \
|
|
"setenv bootargs " \
|
|
"root=/dev/nfs rw " \
|
|
"${console_args} " \
|
|
"${dhcp_ip};" \
|
|
"bootm ${loadaddr} - 0xf00000\0" \
|
|
"nfsboot=setenv bootargs " \
|
|
"root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} " \
|
|
"${console_args} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"mcr3k:eth0:off;" \
|
|
"bootm 0x04060000 - 0x04050000\0" \
|
|
"dhcpboot=dhcp ${loadaddr} ${filename};" \
|
|
"tftp 0xf00000 mcr3000.dtb;" \
|
|
"setenv bootargs " \
|
|
"${console_args} " \
|
|
"${dhcp_ip} " \
|
|
"${ofl_args}; " \
|
|
"bootm ${loadaddr} - 0xf00000\0"
|
|
|
|
#define CONFIG_IPADDR 192.168.0.3
|
|
#define CONFIG_SERVERIP 192.168.0.1
|
|
#define CONFIG_NETMASK 255.0.0.0
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
/* Definitions for initial stack pointer and data area (in DPRAM) */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800)
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800)
|
|
|
|
/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
|
|
/* FLASH organization */
|
|
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 35
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
|
#define CONFIG_SYS_MONITOR_LEN (320 << 10)
|
|
|
|
/* Environment Configuration */
|
|
|
|
/* environment is in FLASH */
|
|
|
|
/* Ethernet configuration part */
|
|
|
|
/* NAND configuration part */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x0C000000
|
|
|
|
#endif /* __CONFIG_H */
|