Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-16 09:48:16 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/tsec.c
Joe Hershberger 1fd92db83d net: cosmetic: Fix var naming net <-> eth drivers 
Update the naming convention used in the network stack functions and
variables that Ethernet drivers use to interact with it.

This cleans up the temporary hacks that were added to this interface
along with the DM support.

This patch has a few remaining checkpatch.pl failures that would be out
of the scope of this patch to fix (drivers that are in gross violation
of checkpatch.pl).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00

698 lines
18 KiB
C
Raw Blame History

/*
* Freescale Three Speed Ethernet Controller driver
*
* This software may be used and distributed according to the
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
* Copyright 2004-2011, 2013 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
*/
#include <config.h>
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <command.h>
#include <tsec.h>
#include <fsl_mdio.h>
#include <asm/errno.h>
#include <asm/processor.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define TX_BUF_CNT 2
static uint rx_idx; /* index of the current RX buffer */
static uint tx_idx; /* index of the current TX buffer */
#ifdef __GNUC__
static struct txbd8 __iomem txbd[TX_BUF_CNT] __aligned(8);
static struct rxbd8 __iomem rxbd[PKTBUFSRX] __aligned(8);
#else
#error "rtx must be 64-bit aligned"
#endif
static int tsec_send(struct eth_device *dev, void *packet, int length);
/* Default initializations for TSEC controllers. */
static struct tsec_info_struct tsec_info[] = {
#ifdef CONFIG_TSEC1
STD_TSEC_INFO(1), /* TSEC1 */
#endif
#ifdef CONFIG_TSEC2
STD_TSEC_INFO(2), /* TSEC2 */
#endif
#ifdef CONFIG_MPC85XX_FEC
{
.regs = TSEC_GET_REGS(2, 0x2000),
.devname = CONFIG_MPC85XX_FEC_NAME,
.phyaddr = FEC_PHY_ADDR,
.flags = FEC_FLAGS,
.mii_devname = DEFAULT_MII_NAME
}, /* FEC */
#endif
#ifdef CONFIG_TSEC3
STD_TSEC_INFO(3), /* TSEC3 */
#endif
#ifdef CONFIG_TSEC4
STD_TSEC_INFO(4), /* TSEC4 */
#endif
};
#define TBIANA_SETTINGS ( \
TBIANA_ASYMMETRIC_PAUSE \
| TBIANA_SYMMETRIC_PAUSE \
| TBIANA_FULL_DUPLEX \
)
/* By default force the TBI PHY into 1000Mbps full duplex when in SGMII mode */
#ifndef CONFIG_TSEC_TBICR_SETTINGS
#define CONFIG_TSEC_TBICR_SETTINGS ( \
TBICR_PHY_RESET \
| TBICR_ANEG_ENABLE \
| TBICR_FULL_DUPLEX \
| TBICR_SPEED1_SET \
)
#endif /* CONFIG_TSEC_TBICR_SETTINGS */
/* Configure the TBI for SGMII operation */
static void tsec_configure_serdes(struct tsec_private *priv)
{
/* Access TBI PHY registers at given TSEC register offset as opposed
* to the register offset used for external PHY accesses */
tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
0, TBI_ANA, TBIANA_SETTINGS);
tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
0, TBI_TBICON, TBICON_CLK_SELECT);
tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
0, TBI_CR, CONFIG_TSEC_TBICR_SETTINGS);
}
#ifdef CONFIG_MCAST_TFTP
/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */
/* Set the appropriate hash bit for the given addr */
/* The algorithm works like so:
* 1) Take the Destination Address (ie the multicast address), and
* do a CRC on it (little endian), and reverse the bits of the
* result.
* 2) Use the 8 most significant bits as a hash into a 256-entry
* table. The table is controlled through 8 32-bit registers:
* gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is entry
* 255. This means that the 3 most significant bits in the
* hash index which gaddr register to use, and the 5 other bits
* indicate which bit (assuming an IBM numbering scheme, which
* for PowerPC (tm) is usually the case) in the register holds
* the entry. */
static int
tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
u32 result, value;
u8 whichbit, whichreg;
result = ether_crc(MAC_ADDR_LEN, mcast_mac);
whichbit = (result >> 24) & 0x1f; /* the 5 LSB = which bit to set */
whichreg = result >> 29; /* the 3 MSB = which reg to set it in */
value = 1 << (31-whichbit);
if (set)
setbits_be32(&regs->hash.gaddr0 + whichreg, value);
else
clrbits_be32(&regs->hash.gaddr0 + whichreg, value);
return 0;
}
#endif /* Multicast TFTP ? */
/* Initialized required registers to appropriate values, zeroing
* those we don't care about (unless zero is bad, in which case,
* choose a more appropriate value)
*/
static void init_registers(struct tsec __iomem *regs)
{
/* Clear IEVENT */
out_be32(&regs->ievent, IEVENT_INIT_CLEAR);
out_be32(&regs->imask, IMASK_INIT_CLEAR);
out_be32(&regs->hash.iaddr0, 0);
out_be32(&regs->hash.iaddr1, 0);
out_be32(&regs->hash.iaddr2, 0);
out_be32(&regs->hash.iaddr3, 0);
out_be32(&regs->hash.iaddr4, 0);
out_be32(&regs->hash.iaddr5, 0);
out_be32(&regs->hash.iaddr6, 0);
out_be32(&regs->hash.iaddr7, 0);
out_be32(&regs->hash.gaddr0, 0);
out_be32(&regs->hash.gaddr1, 0);
out_be32(&regs->hash.gaddr2, 0);
out_be32(&regs->hash.gaddr3, 0);
out_be32(&regs->hash.gaddr4, 0);
out_be32(&regs->hash.gaddr5, 0);
out_be32(&regs->hash.gaddr6, 0);
out_be32(&regs->hash.gaddr7, 0);
out_be32(&regs->rctrl, 0x00000000);
/* Init RMON mib registers */
memset((void *)&regs->rmon, 0, sizeof(regs->rmon));
out_be32(&regs->rmon.cam1, 0xffffffff);
out_be32(&regs->rmon.cam2, 0xffffffff);
out_be32(&regs->mrblr, MRBLR_INIT_SETTINGS);
out_be32(&regs->minflr, MINFLR_INIT_SETTINGS);
out_be32(&regs->attr, ATTR_INIT_SETTINGS);
out_be32(&regs->attreli, ATTRELI_INIT_SETTINGS);
}
/* Configure maccfg2 based on negotiated speed and duplex
* reported by PHY handling code
*/
static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
{
struct tsec __iomem *regs = priv->regs;
u32 ecntrl, maccfg2;
if (!phydev->link) {
printf("%s: No link.\n", phydev->dev->name);
return;
}
/* clear all bits relative with interface mode */
ecntrl = in_be32(&regs->ecntrl);
ecntrl &= ~ECNTRL_R100;
maccfg2 = in_be32(&regs->maccfg2);
maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX);
if (phydev->duplex)
maccfg2 |= MACCFG2_FULL_DUPLEX;
switch (phydev->speed) {
case 1000:
maccfg2 |= MACCFG2_GMII;
break;
case 100:
case 10:
maccfg2 |= MACCFG2_MII;
/* Set R100 bit in all modes although
* it is only used in RGMII mode
*/
if (phydev->speed == 100)
ecntrl |= ECNTRL_R100;
break;
default:
printf("%s: Speed was bad\n", phydev->dev->name);
break;
}
out_be32(&regs->ecntrl, ecntrl);
out_be32(&regs->maccfg2, maccfg2);
printf("Speed: %d, %s duplex%s\n", phydev->speed,
(phydev->duplex) ? "full" : "half",
(phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
}
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
/*
* When MACCFG1[Rx_EN] is enabled during system boot as part
* of the eTSEC port initialization sequence,
* the eTSEC Rx logic may not be properly initialized.
*/
void redundant_init(struct eth_device *dev)
{
struct tsec_private *priv = dev->priv;
struct tsec __iomem *regs = priv->regs;
uint t, count = 0;
int fail = 1;
static const u8 pkt[] = {
0x00, 0x1e, 0x4f, 0x12, 0xcb, 0x2c, 0x00, 0x25,
0x64, 0xbb, 0xd1, 0xab, 0x08, 0x00, 0x45, 0x00,
0x00, 0x5c, 0xdd, 0x22, 0x00, 0x00, 0x80, 0x01,
0x1f, 0x71, 0x0a, 0xc1, 0x14, 0x22, 0x0a, 0xc1,
0x14, 0x6a, 0x08, 0x00, 0xef, 0x7e, 0x02, 0x00,
0x94, 0x05, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66,
0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e,
0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76,
0x77, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70,
0x71, 0x72};
/* Enable promiscuous mode */
setbits_be32(&regs->rctrl, 0x8);
/* Enable loopback mode */
setbits_be32(&regs->maccfg1, MACCFG1_LOOPBACK);
/* Enable transmit and receive */
setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
/* Tell the DMA it is clear to go */
setbits_be32(&regs->dmactrl, DMACTRL_INIT_SETTINGS);
out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
#ifdef CONFIG_LS102XA
setbits_be32(&regs->dmactrl, DMACTRL_LE);
#endif
do {
uint16_t status;
tsec_send(dev, (void *)pkt, sizeof(pkt));
/* Wait for buffer to be received */
for (t = 0; in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY; t++) {
if (t >= 10 * TOUT_LOOP) {
printf("%s: tsec: rx error\n", dev->name);
break;
}
}
if (!memcmp(pkt, (void *)net_rx_packets[rx_idx], sizeof(pkt)))
fail = 0;
out_be16(&rxbd[rx_idx].length, 0);
status = RXBD_EMPTY;
if ((rx_idx + 1) == PKTBUFSRX)
status |= RXBD_WRAP;
out_be16(&rxbd[rx_idx].status, status);
rx_idx = (rx_idx + 1) % PKTBUFSRX;
if (in_be32(&regs->ievent) & IEVENT_BSY) {
out_be32(&regs->ievent, IEVENT_BSY);
out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
}
if (fail) {
printf("loopback recv packet error!\n");
clrbits_be32(&regs->maccfg1, MACCFG1_RX_EN);
udelay(1000);
setbits_be32(&regs->maccfg1, MACCFG1_RX_EN);
}
} while ((count++ < 4) && (fail == 1));
if (fail)
panic("eTSEC init fail!\n");
/* Disable promiscuous mode */
clrbits_be32(&regs->rctrl, 0x8);
/* Disable loopback mode */
clrbits_be32(&regs->maccfg1, MACCFG1_LOOPBACK);
}
#endif
/* Set up the buffers and their descriptors, and bring up the
* interface
*/
static void startup_tsec(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
uint16_t status;
int i;
/* reset the indices to zero */
rx_idx = 0;
tx_idx = 0;
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
uint svr;
#endif
/* Point to the buffer descriptors */
out_be32(&regs->tbase, (u32)&txbd[0]);
out_be32(&regs->rbase, (u32)&rxbd[0]);
/* Initialize the Rx Buffer descriptors */
for (i = 0; i < PKTBUFSRX; i++) {
out_be16(&rxbd[i].status, RXBD_EMPTY);
out_be16(&rxbd[i].length, 0);
out_be32(&rxbd[i].bufptr, (u32)net_rx_packets[i]);
}
status = in_be16(&rxbd[PKTBUFSRX - 1].status);
out_be16(&rxbd[PKTBUFSRX - 1].status, status | RXBD_WRAP);
/* Initialize the TX Buffer Descriptors */
for (i = 0; i < TX_BUF_CNT; i++) {
out_be16(&txbd[i].status, 0);
out_be16(&txbd[i].length, 0);
out_be32(&txbd[i].bufptr, 0);
}
status = in_be16(&txbd[TX_BUF_CNT - 1].status);
out_be16(&txbd[TX_BUF_CNT - 1].status, status | TXBD_WRAP);
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
svr = get_svr();
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
redundant_init(dev);
#endif
/* Enable Transmit and Receive */
setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
/* Tell the DMA it is clear to go */
setbits_be32(&regs->dmactrl, DMACTRL_INIT_SETTINGS);
out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
#ifdef CONFIG_LS102XA
setbits_be32(&regs->dmactrl, DMACTRL_LE);
#endif
}
/* This returns the status bits of the device. The return value
* is never checked, and this is what the 8260 driver did, so we
* do the same. Presumably, this would be zero if there were no
* errors
*/
static int tsec_send(struct eth_device *dev, void *packet, int length)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
uint16_t status;
int result = 0;
int i;
/* Find an empty buffer descriptor */
for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx buffers full\n", dev->name);
return result;
}
}
out_be32(&txbd[tx_idx].bufptr, (u32)packet);
out_be16(&txbd[tx_idx].length, length);
status = in_be16(&txbd[tx_idx].status);
out_be16(&txbd[tx_idx].status, status |
(TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT));
/* Tell the DMA to go */
out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
/* Wait for buffer to be transmitted */
for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx error\n", dev->name);
return result;
}
}
tx_idx = (tx_idx + 1) % TX_BUF_CNT;
result = in_be16(&txbd[tx_idx].status) & TXBD_STATS;
return result;
}
static int tsec_recv(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
while (!(in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY)) {
int length = in_be16(&rxbd[rx_idx].length);
uint16_t status = in_be16(&rxbd[rx_idx].status);
/* Send the packet up if there were no errors */
if (!(status & RXBD_STATS))
net_process_received_packet(net_rx_packets[rx_idx],
length - 4);
else
printf("Got error %x\n", (status & RXBD_STATS));
out_be16(&rxbd[rx_idx].length, 0);
status = RXBD_EMPTY;
/* Set the wrap bit if this is the last element in the list */
if ((rx_idx + 1) == PKTBUFSRX)
status |= RXBD_WRAP;
out_be16(&rxbd[rx_idx].status, status);
rx_idx = (rx_idx + 1) % PKTBUFSRX;
}
if (in_be32(&regs->ievent) & IEVENT_BSY) {
out_be32(&regs->ievent, IEVENT_BSY);
out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
}
return -1;
}
/* Stop the interface */
static void tsec_halt(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
while ((in_be32(&regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))
!= (IEVENT_GRSC | IEVENT_GTSC))
;
clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
/* Shut down the PHY, as needed */
phy_shutdown(priv->phydev);
}
/* Initializes data structures and registers for the controller,
* and brings the interface up. Returns the link status, meaning
* that it returns success if the link is up, failure otherwise.
* This allows u-boot to find the first active controller.
*/
static int tsec_init(struct eth_device *dev, bd_t * bd)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
u32 tempval;
int ret;
/* Make sure the controller is stopped */
tsec_halt(dev);
/* Init MACCFG2. Defaults to GMII */
out_be32(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
/* Init ECNTRL */
out_be32(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
/* Copy the station address into the address registers.
* For a station address of 0x12345678ABCD in transmission
* order (BE), MACnADDR1 is set to 0xCDAB7856 and
* MACnADDR2 is set to 0x34120000.
*/
tempval = (dev->enetaddr[5] << 24) | (dev->enetaddr[4] << 16) |
(dev->enetaddr[3] << 8) | dev->enetaddr[2];
out_be32(&regs->macstnaddr1, tempval);
tempval = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16);
out_be32(&regs->macstnaddr2, tempval);
/* Clear out (for the most part) the other registers */
init_registers(regs);
/* Ready the device for tx/rx */
startup_tsec(dev);
/* Start up the PHY */
ret = phy_startup(priv->phydev);
if (ret) {
printf("Could not initialize PHY %s\n",
priv->phydev->dev->name);
return ret;
}
adjust_link(priv, priv->phydev);
/* If there's no link, fail */
return priv->phydev->link ? 0 : -1;
}
static phy_interface_t tsec_get_interface(struct tsec_private *priv)
{
struct tsec __iomem *regs = priv->regs;
u32 ecntrl;
ecntrl = in_be32(&regs->ecntrl);
if (ecntrl & ECNTRL_SGMII_MODE)
return PHY_INTERFACE_MODE_SGMII;
if (ecntrl & ECNTRL_TBI_MODE) {
if (ecntrl & ECNTRL_REDUCED_MODE)
return PHY_INTERFACE_MODE_RTBI;
else
return PHY_INTERFACE_MODE_TBI;
}
if (ecntrl & ECNTRL_REDUCED_MODE) {
if (ecntrl & ECNTRL_REDUCED_MII_MODE)
return PHY_INTERFACE_MODE_RMII;
else {
phy_interface_t interface = priv->interface;
/*
* This isn't autodetected, so it must
* be set by the platform code.
*/
if ((interface == PHY_INTERFACE_MODE_RGMII_ID) ||
(interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
(interface == PHY_INTERFACE_MODE_RGMII_RXID))
return interface;
return PHY_INTERFACE_MODE_RGMII;
}
}
if (priv->flags & TSEC_GIGABIT)
return PHY_INTERFACE_MODE_GMII;
return PHY_INTERFACE_MODE_MII;
}
/* Discover which PHY is attached to the device, and configure it
* properly. If the PHY is not recognized, then return 0
* (failure). Otherwise, return 1
*/
static int init_phy(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct phy_device *phydev;
struct tsec __iomem *regs = priv->regs;
u32 supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full);
if (priv->flags & TSEC_GIGABIT)
supported |= SUPPORTED_1000baseT_Full;
/* Assign a Physical address to the TBI */
out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
priv->interface = tsec_get_interface(priv);
if (priv->interface == PHY_INTERFACE_MODE_SGMII)
tsec_configure_serdes(priv);
phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
if (!phydev)
return 0;
phydev->supported &= supported;
phydev->advertising = phydev->supported;
priv->phydev = phydev;
phy_config(phydev);
return 1;
}
/* Initialize device structure. Returns success if PHY
* initialization succeeded (i.e. if it recognizes the PHY)
*/
static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
{
struct eth_device *dev;
int i;
struct tsec_private *priv;
dev = (struct eth_device *)malloc(sizeof *dev);
if (NULL == dev)
return 0;
memset(dev, 0, sizeof *dev);
priv = (struct tsec_private *)malloc(sizeof(*priv));
if (NULL == priv)
return 0;
priv->regs = tsec_info->regs;
priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
priv->phyaddr = tsec_info->phyaddr;
priv->flags = tsec_info->flags;
sprintf(dev->name, tsec_info->devname);
priv->interface = tsec_info->interface;
priv->bus = miiphy_get_dev_by_name(tsec_info->mii_devname);
dev->iobase = 0;
dev->priv = priv;
dev->init = tsec_init;
dev->halt = tsec_halt;
dev->send = tsec_send;
dev->recv = tsec_recv;
#ifdef CONFIG_MCAST_TFTP
dev->mcast = tsec_mcast_addr;
#endif
/* Tell u-boot to get the addr from the env */
for (i = 0; i < 6; i++)
dev->enetaddr[i] = 0;
eth_register(dev);
/* Reset the MAC */
setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
udelay(2); /* Soft Reset must be asserted for 3 TX clocks */
clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
/* Try to initialize PHY here, and return */
return init_phy(dev);
}
/*
* Initialize all the TSEC devices
*
* Returns the number of TSEC devices that were initialized
*/
int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
{
int i;
int ret, count = 0;
for (i = 0; i < num; i++) {
ret = tsec_initialize(bis, &tsecs[i]);
if (ret > 0)
count += ret;
}
return count;
}
int tsec_standard_init(bd_t *bis)
{
struct fsl_pq_mdio_info info;
info.regs = TSEC_GET_MDIO_REGS_BASE(1);
info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &info);
return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
}
Reference in a new issue View git blame Copy permalink