u-boot/arch/x86/Kconfig
Bin Meng 5ce378cfcf x86: kconfig: Add two options for SMBIOS manufacturer and product name
This introduces two Kconfig options to be used by SMBIOS tables:
board manufacturer and product name.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23 15:27:42 +08:00

573 lines
17 KiB
Text

menu "x86 architecture"
depends on X86
config SYS_ARCH
default "x86"
choice
prompt "Mainboard vendor"
default VENDOR_EMULATION
config VENDOR_CONGATEC
bool "congatec"
config VENDOR_COREBOOT
bool "coreboot"
config VENDOR_EFI
bool "efi"
config VENDOR_EMULATION
bool "emulation"
config VENDOR_GOOGLE
bool "Google"
config VENDOR_INTEL
bool "Intel"
endchoice
# board-specific options below
source "board/congatec/Kconfig"
source "board/coreboot/Kconfig"
source "board/efi/Kconfig"
source "board/emulation/Kconfig"
source "board/google/Kconfig"
source "board/intel/Kconfig"
# platform-specific options below
source "arch/x86/cpu/baytrail/Kconfig"
source "arch/x86/cpu/broadwell/Kconfig"
source "arch/x86/cpu/coreboot/Kconfig"
source "arch/x86/cpu/ivybridge/Kconfig"
source "arch/x86/cpu/qemu/Kconfig"
source "arch/x86/cpu/quark/Kconfig"
source "arch/x86/cpu/queensbay/Kconfig"
# architecture-specific options below
config AHCI
default y
config SYS_MALLOC_F_LEN
default 0x800
config RAMBASE
hex
default 0x100000
config XIP_ROM_SIZE
hex
depends on X86_RESET_VECTOR
default ROM_SIZE
config CPU_ADDR_BITS
int
default 36
config HPET_ADDRESS
hex
default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
config SMM_TSEG
bool
default n
config SMM_TSEG_SIZE
hex
config X86_RESET_VECTOR
bool
default n
config RESET_SEG_START
hex
depends on X86_RESET_VECTOR
default 0xffff0000
config RESET_SEG_SIZE
hex
depends on X86_RESET_VECTOR
default 0x10000
config RESET_VEC_LOC
hex
depends on X86_RESET_VECTOR
default 0xfffffff0
config SYS_X86_START16
hex
depends on X86_RESET_VECTOR
default 0xfffff800
config BOARD_ROMSIZE_KB_512
bool
config BOARD_ROMSIZE_KB_1024
bool
config BOARD_ROMSIZE_KB_2048
bool
config BOARD_ROMSIZE_KB_4096
bool
config BOARD_ROMSIZE_KB_8192
bool
config BOARD_ROMSIZE_KB_16384
bool
choice
prompt "ROM chip size"
depends on X86_RESET_VECTOR
default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
help
Select the size of the ROM chip you intend to flash U-Boot on.
The build system will take care of creating a u-boot.rom file
of the matching size.
config UBOOT_ROMSIZE_KB_512
bool "512 KB"
help
Choose this option if you have a 512 KB ROM chip.
config UBOOT_ROMSIZE_KB_1024
bool "1024 KB (1 MB)"
help
Choose this option if you have a 1024 KB (1 MB) ROM chip.
config UBOOT_ROMSIZE_KB_2048
bool "2048 KB (2 MB)"
help
Choose this option if you have a 2048 KB (2 MB) ROM chip.
config UBOOT_ROMSIZE_KB_4096
bool "4096 KB (4 MB)"
help
Choose this option if you have a 4096 KB (4 MB) ROM chip.
config UBOOT_ROMSIZE_KB_8192
bool "8192 KB (8 MB)"
help
Choose this option if you have a 8192 KB (8 MB) ROM chip.
config UBOOT_ROMSIZE_KB_16384
bool "16384 KB (16 MB)"
help
Choose this option if you have a 16384 KB (16 MB) ROM chip.
endchoice
# Map the config names to an integer (KB).
config UBOOT_ROMSIZE_KB
int
default 512 if UBOOT_ROMSIZE_KB_512
default 1024 if UBOOT_ROMSIZE_KB_1024
default 2048 if UBOOT_ROMSIZE_KB_2048
default 4096 if UBOOT_ROMSIZE_KB_4096
default 8192 if UBOOT_ROMSIZE_KB_8192
default 16384 if UBOOT_ROMSIZE_KB_16384
# Map the config names to a hex value (bytes).
config ROM_SIZE
hex
default 0x80000 if UBOOT_ROMSIZE_KB_512
default 0x100000 if UBOOT_ROMSIZE_KB_1024
default 0x200000 if UBOOT_ROMSIZE_KB_2048
default 0x400000 if UBOOT_ROMSIZE_KB_4096
default 0x800000 if UBOOT_ROMSIZE_KB_8192
default 0xc00000 if UBOOT_ROMSIZE_KB_12288
default 0x1000000 if UBOOT_ROMSIZE_KB_16384
config HAVE_INTEL_ME
bool "Platform requires Intel Management Engine"
help
Newer higher-end devices have an Intel Management Engine (ME)
which is a very large binary blob (typically 1.5MB) which is
required for the platform to work. This enforces a particular
SPI flash format. You will need to supply the me.bin file in
your board directory.
config X86_RAMTEST
bool "Perform a simple RAM test after SDRAM initialisation"
help
If there is something wrong with SDRAM then the platform will
often crash within U-Boot or the kernel. This option enables a
very simple RAM test that quickly checks whether the SDRAM seems
to work correctly. It is not exhaustive but can save time by
detecting obvious failures.
config HAVE_FSP
bool "Add an Firmware Support Package binary"
depends on !EFI
help
Select this option to add an Firmware Support Package binary to
the resulting U-Boot image. It is a binary blob which U-Boot uses
to set up SDRAM and other chipset specific initialization.
Note: Without this binary U-Boot will not be able to set up its
SDRAM so will not boot.
config FSP_FILE
string "Firmware Support Package binary filename"
depends on HAVE_FSP
default "fsp.bin"
help
The filename of the file to use as Firmware Support Package binary
in the board directory.
config FSP_ADDR
hex "Firmware Support Package binary location"
depends on HAVE_FSP
default 0xfffc0000
help
FSP is not Position Independent Code (PIC) and the whole FSP has to
be rebased if it is placed at a location which is different from the
perferred base address specified during the FSP build. Use Intel's
Binary Configuration Tool (BCT) to do the rebase.
The default base address of 0xfffc0000 indicates that the binary must
be located at offset 0xc0000 from the beginning of a 1MB flash device.
config FSP_TEMP_RAM_ADDR
hex
depends on HAVE_FSP
default 0x2000000
help
Stack top address which is used in fsp_init() after DRAM is ready and
CAR is disabled.
config FSP_SYS_MALLOC_F_LEN
hex
depends on HAVE_FSP
default 0x100000
help
Additional size of malloc() pool before relocation.
config FSP_USE_UPD
bool
depends on HAVE_FSP
default y
help
Most FSPs use UPD data region for some FSP customization. But there
are still some FSPs that might not even have UPD. For such FSPs,
override this to n in their platform Kconfig files.
config FSP_BROKEN_HOB
bool
depends on HAVE_FSP
help
Indicate some buggy FSPs that does not report memory used by FSP
itself as reserved in the resource descriptor HOB. Select this to
tell U-Boot to do some additional work to ensure U-Boot relocation
do not overwrite the important boot service data which is used by
FSP, otherwise the subsequent call to fsp_notify() will fail.
config ENABLE_MRC_CACHE
bool "Enable MRC cache"
depends on !EFI && !SYS_COREBOOT
help
Enable this feature to cause MRC data to be cached in NV storage
to be used for speeding up boot time on future reboots and/or
power cycles.
For platforms that use Intel FSP for the memory initialization,
please check FSP output HOB via U-Boot command 'fsp hob' to see
if there is FSP_NON_VOLATILE_STORAGE_HOB_GUID (asm/fsp/fsp_hob.h).
If such GUID does not exist, MRC cache is not avaiable on such
platform (eg: Intel Queensbay), which means selecting this option
here does not make any difference.
config HAVE_MRC
bool "Add a System Agent binary"
depends on !HAVE_FSP
help
Select this option to add a System Agent binary to
the resulting U-Boot image. MRC stands for Memory Reference Code.
It is a binary blob which U-Boot uses to set up SDRAM.
Note: Without this binary U-Boot will not be able to set up its
SDRAM so will not boot.
config CACHE_MRC_BIN
bool
depends on HAVE_MRC
default n
help
Enable caching for the memory reference code binary. This uses an
MTRR (memory type range register) to turn on caching for the section
of SPI flash that contains the memory reference code. This makes
SDRAM init run faster.
config CACHE_MRC_SIZE_KB
int
depends on HAVE_MRC
default 512
help
Sets the size of the cached area for the memory reference code.
This ends at the end of SPI flash (address 0xffffffff) and is
measured in KB. Typically this is set to 512, providing for 0.5MB
of cached space.
config DCACHE_RAM_BASE
hex
depends on HAVE_MRC
help
Sets the base of the data cache area in memory space. This is the
start address of the cache-as-RAM (CAR) area and the address varies
depending on the CPU. Once CAR is set up, read/write memory becomes
available at this address and can be used temporarily until SDRAM
is working.
config DCACHE_RAM_SIZE
hex
depends on HAVE_MRC
default 0x40000
help
Sets the total size of the data cache area in memory space. This
sets the size of the cache-as-RAM (CAR) area. Note that much of the
CAR space is required by the MRC. The CAR space available to U-Boot
is normally at the start and typically extends to 1/4 or 1/2 of the
available size.
config DCACHE_RAM_MRC_VAR_SIZE
hex
depends on HAVE_MRC
help
This is the amount of CAR (Cache as RAM) reserved for use by the
memory reference code. This depends on the implementation of the
memory reference code and must be set correctly or the board will
not boot.
config HAVE_REFCODE
bool "Add a Reference Code binary"
help
Select this option to add a Reference Code binary to the resulting
U-Boot image. This is an Intel binary blob that handles system
initialisation, in this case the PCH and System Agent.
Note: Without this binary (on platforms that need it such as
broadwell) U-Boot will be missing some critical setup steps.
Various peripherals may fail to work.
config SMP
bool "Enable Symmetric Multiprocessing"
default n
help
Enable use of more than one CPU in U-Boot and the Operating System
when loaded. Each CPU will be started up and information can be
obtained using the 'cpu' command. If this option is disabled, then
only one CPU will be enabled regardless of the number of CPUs
available.
config MAX_CPUS
int "Maximum number of CPUs permitted"
depends on SMP
default 4
help
When using multi-CPU chips it is possible for U-Boot to start up
more than one CPU. The stack memory used by all of these CPUs is
pre-allocated so at present U-Boot wants to know the maximum
number of CPUs that may be present. Set this to at least as high
as the number of CPUs in your system (it uses about 4KB of RAM for
each CPU).
config AP_STACK_SIZE
hex
depends on SMP
default 0x1000
help
Each additional CPU started by U-Boot requires its own stack. This
option sets the stack size used by each CPU and directly affects
the memory used by this initialisation process. Typically 4KB is
enough space.
config HAVE_VGA_BIOS
bool "Add a VGA BIOS image"
help
Select this option if you have a VGA BIOS image that you would
like to add to your ROM.
config VGA_BIOS_FILE
string "VGA BIOS image filename"
depends on HAVE_VGA_BIOS
default "vga.bin"
help
The filename of the VGA BIOS image in the board directory.
config VGA_BIOS_ADDR
hex "VGA BIOS image location"
depends on HAVE_VGA_BIOS
default 0xfff90000
help
The location of VGA BIOS image in the SPI flash. For example, base
address of 0xfff90000 indicates that the image will be put at offset
0x90000 from the beginning of a 1MB flash device.
menu "System tables"
depends on !EFI && !SYS_COREBOOT
config GENERATE_PIRQ_TABLE
bool "Generate a PIRQ table"
default n
help
Generate a PIRQ routing table for this board. The PIRQ routing table
is generated by U-Boot in the system memory from 0xf0000 to 0xfffff
at every 16-byte boundary with a PCI IRQ routing signature ("$PIR").
It specifies the interrupt router information as well how all the PCI
devices' interrupt pins are wired to PIRQs.
config GENERATE_SFI_TABLE
bool "Generate a SFI (Simple Firmware Interface) table"
help
The Simple Firmware Interface (SFI) provides a lightweight method
for platform firmware to pass information to the operating system
via static tables in memory. Kernel SFI support is required to
boot on SFI-only platforms. If you have ACPI tables then these are
used instead.
U-Boot writes this table in write_sfi_table() just before booting
the OS.
For more information, see http://simplefirmware.org
config GENERATE_MP_TABLE
bool "Generate an MP (Multi-Processor) table"
default n
help
Generate an MP (Multi-Processor) table for this board. The MP table
provides a way for the operating system to support for symmetric
multiprocessing as well as symmetric I/O interrupt handling with
the local APIC and I/O APIC.
config GENERATE_ACPI_TABLE
bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
default n
select QFW if QEMU
help
The Advanced Configuration and Power Interface (ACPI) specification
provides an open standard for device configuration and management
by the operating system. It defines platform-independent interfaces
for configuration and power management monitoring.
config GENERATE_SMBIOS_TABLE
bool "Generate an SMBIOS (System Management BIOS) table"
default y
help
The System Management BIOS (SMBIOS) specification addresses how
motherboard and system vendors present management information about
their products in a standard format by extending the BIOS interface
on Intel architecture systems.
Check http://www.dmtf.org/standards/smbios for details.
config SMBIOS_MANUFACTURER
string "SMBIOS Manufacturer"
depends on GENERATE_SMBIOS_TABLE
default SYS_VENDOR
help
The board manufacturer to store in SMBIOS structures.
Change this to override the default one (CONFIG_SYS_VENDOR).
config SMBIOS_PRODUCT_NAME
string "SMBIOS Product Name"
depends on GENERATE_SMBIOS_TABLE
default SYS_BOARD
help
The product name to store in SMBIOS structures.
Change this to override the default one (CONFIG_SYS_BOARD).
endmenu
config MAX_PIRQ_LINKS
int
default 8
help
This variable specifies the number of PIRQ interrupt links which are
routable. On most older chipsets, this is 4, PIRQA through PIRQD.
Some newer chipsets offer more than four links, commonly up to PIRQH.
config IRQ_SLOT_COUNT
int
default 128
help
U-Boot can support up to 254 IRQ slot info in the PIRQ routing table
which in turns forms a table of exact 4KiB. The default value 128
should be enough for most boards. If this does not fit your board,
change it according to your needs.
config PCIE_ECAM_BASE
hex
default 0xe0000000
help
This is the memory-mapped address of PCI configuration space, which
is only available through the Enhanced Configuration Access
Mechanism (ECAM) with PCI Express. It can be set up almost
anywhere. Before it is set up, it is possible to access PCI
configuration space through I/O access, but memory access is more
convenient. Using this, PCI can be scanned and configured. This
should be set to a region that does not conflict with memory
assigned to PCI devices - i.e. the memory and prefetch regions, as
passed to pci_set_region().
config PCIE_ECAM_SIZE
hex
default 0x10000000
help
This is the size of memory-mapped address of PCI configuration space,
which is only available through the Enhanced Configuration Access
Mechanism (ECAM) with PCI Express. Each bus consumes 1 MiB memory,
so a default 0x10000000 size covers all of the 256 buses which is the
maximum number of PCI buses as defined by the PCI specification.
config I8259_PIC
bool
default y
help
Intel 8259 ISA compatible chipset incorporates two 8259 (master and
slave) interrupt controllers. Include this to have U-Boot set up
the interrupt correctly.
config I8254_TIMER
bool
default y
help
Intel 8254 timer contains three counters which have fixed uses.
Include this to have U-Boot set up the timer correctly.
config I8042_KEYB
default y
config DM_KEYBOARD
default y
config SEABIOS
bool "Support booting SeaBIOS"
help
SeaBIOS is an open source implementation of a 16-bit X86 BIOS.
It can run in an emulator or natively on X86 hardware with the use
of coreboot/U-Boot. By turning on this option, U-Boot prepares
all the configuration tables that are necessary to boot SeaBIOS.
Check http://www.seabios.org/SeaBIOS for details.
config HIGH_TABLE_SIZE
hex "Size of configuration tables which reside in high memory"
default 0x10000
depends on SEABIOS
help
SeaBIOS itself resides in E seg and F seg, where U-Boot puts all
configuration tables like PIRQ/MP/ACPI. To avoid conflicts, U-Boot
puts a copy of configuration tables in high memory region which
is reserved on the stack before relocation. The region size is
determined by this option.
Increse it if the default size does not fit the board's needs.
This is most likely due to a large ACPI DSDT table is used.
source "arch/x86/lib/efi/Kconfig"
endmenu