u-boot/arch/arm/include/asm/arch-sunxi/sys_proto.h
Hans de Goede fc8991c61c sunxi: Fix gmac not working due to cpu_eth_init no longer being called
cpu_eth_init is no longer called for dm enabled eth drivers, this
was causing the sunxi gmac eth controller to no longer work in u-boot.

This commit fixes this by calling the clock, reset and pinmux setup
function from s_init() and enabling the phy power pin (if any) from
board_init().

The enabling of phy power cannot be done from s_init because it uses dm
and dm is not ready yet at this point.

Note that the mdelay is dropped as the phy gets enabled much earlier
now, so it is no longer needed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Tested-by: Karsten Merker <merker@debian.org>
Tested-by: Michael Haas <haas@computerlinguist.org>
2016-03-23 22:04:13 +01:00

33 lines
780 B
C

/*
* (C) Copyright 2007-2012
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
#include <linux/types.h>
void sdelay(unsigned long);
/* return_to_fel() - Return to BROM from SPL
*
* This returns back into the BROM after U-Boot SPL has performed its initial
* init. It uses the provided lr and sp to do so.
*
* @lr: BROM link register value (return address)
* @sp: BROM stack pointer
*/
void return_to_fel(uint32_t lr, uint32_t sp);
/* Board / SoC level designware gmac init */
#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
void eth_init_board(void);
#else
static inline void eth_init_board(void) {}
#endif
#endif