u-boot/board/beacon/imx8mn/README
Wolfgang Denk 66356b4c06 WS cleanup: remove trailing empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30 08:08:56 -04:00

38 lines
1,008 B
Text

U-Boot for the Beacon EmbeddedWorks i.MX8M Nano Devkit
Quick Start
===========
- Build the ARM Trusted firmware binary
- Get ddr firmware
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
======================================
Note: $(srctree) is U-Boot source directory
$ git clone https://source.codeaurora.org/external/imx/imx-atf
$ git checkout imx_5.4.47_2.2.0
$ make PLAT=imx8mn bl31 CROSS_COMPILE=aarch64-linux-gnu-
$ cp build/imx8mm/release/bl31.bin $(srctree)
Get the DDR firmware
====================
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
$ chmod +x firmware-imx-8.9.bin
$ ./firmware-imx-8.9
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
Build U-Boot
============
$ make imx8mn_beacon_defconfig
$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x960000
Burn U-Boot to microSD Card
===========================
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
Boot
====
Set baseboard DIP switch:
S17: 1100XXXX