mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
cba0635386
This patch sets the serial# environment variable by reading the board serial number from the OTP memory region. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
149 lines
3.4 KiB
C
149 lines
3.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2019 Western Digital Corporation or its affiliates.
|
|
*
|
|
* Authors:
|
|
* Anup Patel <anup.patel@wdc.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
|
|
#define FU540_OTP_BASE_ADDR 0x10070000
|
|
|
|
struct fu540_otp_regs {
|
|
u32 pa; /* Address input */
|
|
u32 paio; /* Program address input */
|
|
u32 pas; /* Program redundancy cell selection input */
|
|
u32 pce; /* OTP Macro enable input */
|
|
u32 pclk; /* Clock input */
|
|
u32 pdin; /* Write data input */
|
|
u32 pdout; /* Read data output */
|
|
u32 pdstb; /* Deep standby mode enable input (active low) */
|
|
u32 pprog; /* Program mode enable input */
|
|
u32 ptc; /* Test column enable input */
|
|
u32 ptm; /* Test mode enable input */
|
|
u32 ptm_rep;/* Repair function test mode enable input */
|
|
u32 ptr; /* Test row enable input */
|
|
u32 ptrim; /* Repair function enable input */
|
|
u32 pwe; /* Write enable input (defines program cycle) */
|
|
} __packed;
|
|
|
|
#define BYTES_PER_FUSE 4
|
|
#define NUM_FUSES 0x1000
|
|
|
|
static int fu540_otp_read(int offset, void *buf, int size)
|
|
{
|
|
struct fu540_otp_regs *regs = (void __iomem *)FU540_OTP_BASE_ADDR;
|
|
unsigned int i;
|
|
int fuseidx = offset / BYTES_PER_FUSE;
|
|
int fusecount = size / BYTES_PER_FUSE;
|
|
u32 fusebuf[fusecount];
|
|
|
|
/* check bounds */
|
|
if (offset < 0 || size < 0)
|
|
return -EINVAL;
|
|
if (fuseidx >= NUM_FUSES)
|
|
return -EINVAL;
|
|
if ((fuseidx + fusecount) > NUM_FUSES)
|
|
return -EINVAL;
|
|
|
|
/* init OTP */
|
|
writel(0x01, ®s->pdstb); /* wake up from stand-by */
|
|
writel(0x01, ®s->ptrim); /* enable repair function */
|
|
writel(0x01, ®s->pce); /* enable input */
|
|
|
|
/* read all requested fuses */
|
|
for (i = 0; i < fusecount; i++, fuseidx++) {
|
|
writel(fuseidx, ®s->pa);
|
|
|
|
/* cycle clock to read */
|
|
writel(0x01, ®s->pclk);
|
|
mdelay(1);
|
|
writel(0x00, ®s->pclk);
|
|
mdelay(1);
|
|
|
|
/* read the value */
|
|
fusebuf[i] = readl(®s->pdout);
|
|
}
|
|
|
|
/* shut down */
|
|
writel(0, ®s->pce);
|
|
writel(0, ®s->ptrim);
|
|
writel(0, ®s->pdstb);
|
|
|
|
/* copy out */
|
|
memcpy(buf, fusebuf, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 fu540_read_serialnum(void)
|
|
{
|
|
int ret;
|
|
u32 serial[2] = {0};
|
|
|
|
for (int i = 0xfe * 4; i > 0; i -= 8) {
|
|
ret = fu540_otp_read(i, serial, sizeof(serial));
|
|
if (ret) {
|
|
printf("%s: error reading from OTP\n", __func__);
|
|
break;
|
|
}
|
|
if (serial[0] == ~serial[1])
|
|
return serial[0];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fu540_setup_macaddr(u32 serialnum)
|
|
{
|
|
/* Default MAC address */
|
|
unsigned char mac[6] = { 0x70, 0xb3, 0xd5, 0x92, 0xf0, 0x00 };
|
|
|
|
/*
|
|
* We derive our board MAC address by ORing last three bytes
|
|
* of board serial number to above default MAC address.
|
|
*
|
|
* This logic of deriving board MAC address is taken from
|
|
* SiFive FSBL and is kept unchanged.
|
|
*/
|
|
mac[5] |= (serialnum >> 0) & 0xff;
|
|
mac[4] |= (serialnum >> 8) & 0xff;
|
|
mac[3] |= (serialnum >> 16) & 0xff;
|
|
|
|
/* Update environment variable */
|
|
eth_env_set_enetaddr("ethaddr", mac);
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u32 serial_num;
|
|
char buf[9] = {0};
|
|
|
|
/* Set ethaddr environment variable from board serial number */
|
|
if (!env_get("serial#")) {
|
|
serial_num = fu540_read_serialnum();
|
|
if (!serial_num) {
|
|
WARN(true, "Board serial number should not be 0 !!\n");
|
|
return 0;
|
|
}
|
|
snprintf(buf, sizeof(buf), "%08x", serial_num);
|
|
env_set("serial#", buf);
|
|
fu540_setup_macaddr(serial_num);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
/* For now nothing to do here. */
|
|
|
|
return 0;
|
|
}
|