mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
4ff083f09b
Upstream dwc3 U-Boot driver is not able to handle child nodes properly that's why comment them in DT for now. This patch should be reverted when dwc3 driver handles it properly. DT node itself is aligned with dt schema. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/537c91a7ac0843358c4e33aa10d9e035d8e92faf.1699286139.git.michal.simek@amd.com
398 lines
8.2 KiB
Text
398 lines
8.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* dts file for KR260 revA Carrier Card
|
|
*
|
|
* (C) Copyright 2021, Xilinx, Inc.
|
|
*
|
|
* Michal Simek <michal.simek@amd.com>
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
&{/} {
|
|
compatible = "xlnx,zynqmp-sk-kr260-revA",
|
|
"xlnx,zynqmp-sk-kr260", "xlnx,zynqmp";
|
|
model = "ZynqMP KR260 revA";
|
|
|
|
ina260-u14 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
|
|
};
|
|
|
|
si5332_0: si5332_0 { /* u17 - GEM0/1 */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <125000000>;
|
|
};
|
|
|
|
si5332_1: si5332_1 { /* u17 - DP */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
si5332_2: si5332_2 { /* u17 - USB */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <26000000>;
|
|
};
|
|
|
|
si5332_3: si5332_3 { /* u17 - SFP+ */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <156250000>;
|
|
};
|
|
|
|
si5332_4: si5332_4 { /* u17 - GEM2 */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
si5332_5: si5332_5 { /* u17 - GEM3 */
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
};
|
|
|
|
&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c1_default>;
|
|
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
|
scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
|
|
u14: ina260@40 { /* u14 */
|
|
compatible = "ti,ina260";
|
|
#io-channel-cells = <1>;
|
|
label = "ina260-u14";
|
|
reg = <0x40>;
|
|
};
|
|
|
|
slg7xl45106: gpio@11 { /* u19 - reset logic */
|
|
compatible = "dlg,slg7xl45106";
|
|
reg = <0x11>;
|
|
label = "resetchip";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
|
|
"SD_RESET_B", "USB0_HUB_RESET_B",
|
|
"USB1_HUB_RESET_B", "PS_GEM0_RESET_B",
|
|
"PS_GEM1_RESET_B", "";
|
|
};
|
|
|
|
i2c-mux@74 { /* u18 */
|
|
compatible = "nxp,pca9546";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x74>;
|
|
usbhub_i2c0: i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
usbhub_i2c1: i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
/* Bus 2/3 are not connected */
|
|
};
|
|
|
|
/* si5332@6a - u17 - clock-generator */
|
|
};
|
|
|
|
/* GEM SGMII/DP and USB 3.0 */
|
|
&psgtr {
|
|
status = "okay";
|
|
/* gem0/1, dp, usb */
|
|
clocks = <&si5332_0>, <&si5332_1>, <&si5332_2>;
|
|
clock-names = "ref0", "ref1", "ref2";
|
|
};
|
|
|
|
&zynqmp_dpsub {
|
|
status = "okay";
|
|
phy-names = "dp-phy0";
|
|
phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
|
|
assigned-clock-rates = <27000000>, <25000000>, <300000000>;
|
|
};
|
|
|
|
&zynqmp_dpdma {
|
|
status = "okay";
|
|
assigned-clock-rates = <600000000>;
|
|
};
|
|
|
|
&usb0 { /* mio52 - mio63 */
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb0_default>;
|
|
phy-names = "usb3-phy";
|
|
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
|
|
reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
|
|
assigned-clock-rates = <250000000>, <20000000>;
|
|
#if 0
|
|
usbhub0: usb-hub { /* u43 */
|
|
i2c-bus = <&usbhub_i2c0>;
|
|
compatible = "microchip,usb5744";
|
|
reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
usb2244: usb-sd { /* u38 */
|
|
compatible = "microchip,usb2244";
|
|
reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
#endif
|
|
};
|
|
|
|
&dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
snps,usb3_lpm_capable;
|
|
maximum-speed = "super-speed";
|
|
};
|
|
|
|
&usb1 { /* mio64 - mio75 */
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb1_default>;
|
|
phy-names = "usb3-phy";
|
|
phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
|
|
reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
|
|
assigned-clock-rates = <250000000>, <20000000>;
|
|
|
|
usbhub1: usb-hub { /* u84 */
|
|
i2c-bus = <&usbhub_i2c1>;
|
|
compatible = "microchip,usb5744";
|
|
reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&dwc3_1 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
snps,usb3_lpm_capable;
|
|
maximum-speed = "super-speed";
|
|
};
|
|
|
|
&gem0 { /* mdio mio50/51 */
|
|
status = "okay";
|
|
phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "sgmii";
|
|
is-internal-pcspma;
|
|
assigned-clock-rates = <250000000>;
|
|
};
|
|
|
|
&gem1 { /* mdio mio50/51, gem mio38 - mio49 */
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gem1_default>;
|
|
phy-handle = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
assigned-clock-rates = <250000000>;
|
|
|
|
mdio: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy0: ethernet-phy@4 { /* u81 */
|
|
#phy-cells = <1>;
|
|
compatible = "ethernet-phy-id2000.a231";
|
|
reg = <4>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
reset-assert-us = <300>;
|
|
reset-deassert-us = <280>;
|
|
reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
phy1: ethernet-phy@8 { /* u36 */
|
|
#phy-cells = <1>;
|
|
compatible = "ethernet-phy-id2000.a231";
|
|
reg = <8>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
reset-assert-us = <100>;
|
|
reset-deassert-us = <280>;
|
|
reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* gem2/gem3 via PL with phys u79@2 and u80@3 */
|
|
|
|
&pinctrl0 {
|
|
status = "okay";
|
|
|
|
pinctrl_uart1_default: uart1-default {
|
|
conf {
|
|
groups = "uart1_9_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO37";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO36";
|
|
bias-disable;
|
|
output-enable;
|
|
};
|
|
|
|
mux {
|
|
groups = "uart1_9_grp";
|
|
function = "uart1";
|
|
};
|
|
};
|
|
|
|
pinctrl_i2c1_default: i2c1-default {
|
|
conf {
|
|
groups = "i2c1_6_grp";
|
|
bias-pull-up;
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
mux {
|
|
groups = "i2c1_6_grp";
|
|
function = "i2c1";
|
|
};
|
|
};
|
|
|
|
pinctrl_i2c1_gpio: i2c1-gpio {
|
|
conf {
|
|
groups = "gpio0_24_grp", "gpio0_25_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
mux {
|
|
groups = "gpio0_24_grp", "gpio0_25_grp";
|
|
function = "gpio0";
|
|
};
|
|
};
|
|
|
|
pinctrl_gem1_default: gem1-default {
|
|
conf {
|
|
groups = "ethernet1_0_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO44", "MIO46", "MIO48";
|
|
bias-high-impedance;
|
|
low-power-disable;
|
|
};
|
|
|
|
conf-bootstrap {
|
|
pins = "MIO45", "MIO47", "MIO49";
|
|
bias-disable;
|
|
output-enable;
|
|
low-power-disable;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO38", "MIO39", "MIO40",
|
|
"MIO41", "MIO42", "MIO43";
|
|
bias-disable;
|
|
output-enable;
|
|
low-power-enable;
|
|
};
|
|
|
|
conf-mdio {
|
|
groups = "mdio1_0_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
bias-disable;
|
|
output-enable;
|
|
};
|
|
|
|
mux-mdio {
|
|
function = "mdio1";
|
|
groups = "mdio1_0_grp";
|
|
};
|
|
|
|
mux {
|
|
function = "ethernet1";
|
|
groups = "ethernet1_0_grp";
|
|
};
|
|
};
|
|
|
|
pinctrl_usb0_default: usb0-default {
|
|
conf {
|
|
groups = "usb0_0_grp";
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO52", "MIO53", "MIO55";
|
|
bias-high-impedance;
|
|
drive-strength = <12>;
|
|
slew-rate = <SLEW_RATE_FAST>;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
|
|
"MIO60", "MIO61", "MIO62", "MIO63";
|
|
bias-disable;
|
|
output-enable;
|
|
drive-strength = <4>;
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
};
|
|
|
|
mux {
|
|
groups = "usb0_0_grp";
|
|
function = "usb0";
|
|
};
|
|
};
|
|
|
|
pinctrl_usb1_default: usb1-default {
|
|
conf {
|
|
groups = "usb1_0_grp";
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO64", "MIO65", "MIO67";
|
|
bias-high-impedance;
|
|
drive-strength = <12>;
|
|
slew-rate = <SLEW_RATE_FAST>;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
|
|
"MIO72", "MIO73", "MIO74", "MIO75";
|
|
bias-disable;
|
|
output-enable;
|
|
drive-strength = <4>;
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
};
|
|
|
|
mux {
|
|
groups = "usb1_0_grp";
|
|
function = "usb1";
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_default>;
|
|
};
|