u-boot/arch/mips/dts/sagem,f@st1704.dts
Neil Armstrong ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30

73 lines
1 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
*/
/dts-v1/;
#include "brcm,bcm6338.dtsi"
/ {
model = "Sagem F@ST1704";
compatible = "sagem,f@st1704", "brcm,bcm6338";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
inet_green {
label = "F@ST1704:green:inet";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
power_green {
label = "F@ST1704:green:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
inet_red {
label = "F@ST1704:red:inet";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
};
&enet {
status = "okay";
phy = <&enetphy>;
phy-mode = "mii";
enetphy: fixed-link {
reg = <1>;
speed = <100>;
full-duplex;
};
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
spi-flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
};
};
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
};