mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
d429688754
For the KVM and XEN hypervisors to be usable, we need to enter the kernel in HYP mode. Now that we already are in non-secure state, HYP mode switching is within short reach. While doing the non-secure switch, we have to enable the HVC instruction and setup the HYP mode HVBAR (while still secure). The actual switch is done by dropping back from a HYP mode handler without actually leaving HYP mode, so we introduce a new handler routine in our new secure exception vector table. In the assembly switching routine we save and restore the banked LR and SP registers around the hypercall to do the actual HYP mode switch. The C routine first checks whether we are in HYP mode already and also whether the virtualization extensions are available. It also checks whether the HYP mode switch was finally successful. The bootm command part only calls the new function after the non-secure switch. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
92 lines
2.6 KiB
C
92 lines
2.6 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
* Aneesh V <aneesh@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef ARMV7_H
|
|
#define ARMV7_H
|
|
|
|
/* Cortex-A9 revisions */
|
|
#define MIDR_CORTEX_A9_R0P1 0x410FC091
|
|
#define MIDR_CORTEX_A9_R1P2 0x411FC092
|
|
#define MIDR_CORTEX_A9_R1P3 0x411FC093
|
|
#define MIDR_CORTEX_A9_R2P10 0x412FC09A
|
|
|
|
/* Cortex-A15 revisions */
|
|
#define MIDR_CORTEX_A15_R0P0 0x410FC0F0
|
|
#define MIDR_CORTEX_A15_R2P2 0x412FC0F2
|
|
|
|
/* Cortex-A7 revisions */
|
|
#define MIDR_CORTEX_A7_R0P0 0x410FC070
|
|
|
|
#define MIDR_PRIMARY_PART_MASK 0xFF0FFFF0
|
|
|
|
/* ID_PFR1 feature fields */
|
|
#define CPUID_ARM_SEC_SHIFT 4
|
|
#define CPUID_ARM_SEC_MASK (0xF << CPUID_ARM_SEC_SHIFT)
|
|
#define CPUID_ARM_VIRT_SHIFT 12
|
|
#define CPUID_ARM_VIRT_MASK (0xF << CPUID_ARM_VIRT_SHIFT)
|
|
#define CPUID_ARM_GENTIMER_SHIFT 16
|
|
#define CPUID_ARM_GENTIMER_MASK (0xF << CPUID_ARM_GENTIMER_SHIFT)
|
|
|
|
/* valid bits in CBAR register / PERIPHBASE value */
|
|
#define CBAR_MASK 0xFFFF8000
|
|
|
|
/* CCSIDR */
|
|
#define CCSIDR_LINE_SIZE_OFFSET 0
|
|
#define CCSIDR_LINE_SIZE_MASK 0x7
|
|
#define CCSIDR_ASSOCIATIVITY_OFFSET 3
|
|
#define CCSIDR_ASSOCIATIVITY_MASK (0x3FF << 3)
|
|
#define CCSIDR_NUM_SETS_OFFSET 13
|
|
#define CCSIDR_NUM_SETS_MASK (0x7FFF << 13)
|
|
|
|
/*
|
|
* Values for InD field in CSSELR
|
|
* Selects the type of cache
|
|
*/
|
|
#define ARMV7_CSSELR_IND_DATA_UNIFIED 0
|
|
#define ARMV7_CSSELR_IND_INSTRUCTION 1
|
|
|
|
/* Values for Ctype fields in CLIDR */
|
|
#define ARMV7_CLIDR_CTYPE_NO_CACHE 0
|
|
#define ARMV7_CLIDR_CTYPE_INSTRUCTION_ONLY 1
|
|
#define ARMV7_CLIDR_CTYPE_DATA_ONLY 2
|
|
#define ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA 3
|
|
#define ARMV7_CLIDR_CTYPE_UNIFIED 4
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#include <linux/types.h>
|
|
|
|
/*
|
|
* CP15 Barrier instructions
|
|
* Please note that we have separate barrier instructions in ARMv7
|
|
* However, we use the CP15 based instructtions because we use
|
|
* -march=armv5 in U-Boot
|
|
*/
|
|
#define CP15ISB asm volatile ("mcr p15, 0, %0, c7, c5, 4" : : "r" (0))
|
|
#define CP15DSB asm volatile ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0))
|
|
#define CP15DMB asm volatile ("mcr p15, 0, %0, c7, c10, 5" : : "r" (0))
|
|
|
|
void v7_outer_cache_enable(void);
|
|
void v7_outer_cache_disable(void);
|
|
void v7_outer_cache_flush_all(void);
|
|
void v7_outer_cache_inval_all(void);
|
|
void v7_outer_cache_flush_range(u32 start, u32 end);
|
|
void v7_outer_cache_inval_range(u32 start, u32 end);
|
|
|
|
#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
|
|
|
|
int armv7_switch_nonsec(void);
|
|
int armv7_switch_hyp(void);
|
|
|
|
/* defined in assembly file */
|
|
unsigned int _nonsec_init(void);
|
|
void _smp_pen(void);
|
|
void _switch_to_hyp(void);
|
|
#endif /* CONFIG_ARMV7_NONSEC || CONFIG_ARMV7_VIRT */
|
|
|
|
#endif /* ! __ASSEMBLY__ */
|
|
|
|
#endif
|