mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
5bbeea86eb
The following changes are based on kernel UCC ethernet performance:
1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
switch to enable this setting.
The following changes are based on the App Note AN3369 and
verified to improve memory latency using LMbench:
3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
previously.
5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
Twr=15ns, and this was already the setting in DDR_MODE)
6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
Trp=15ns)
7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
Tras=40ns)
8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
Trcd=15ns)
9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
Trfc=75ns)
10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
on Tfaw=50ns)
11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
on CL=3 and WL=2).
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
|
||
|---|---|---|
| .. | ||
| 74xx_7xx | ||
| arm720t | ||
| arm920t | ||
| arm925t | ||
| arm926ejs | ||
| arm946es | ||
| arm1136 | ||
| arm_intcm | ||
| at32ap | ||
| bf533 | ||
| bf537 | ||
| bf561 | ||
| i386 | ||
| ixp | ||
| lh7a40x | ||
| mcf52x2 | ||
| mcf523x | ||
| mcf532x | ||
| mcf547x_8x | ||
| mcf5227x | ||
| mcf5445x | ||
| microblaze | ||
| mips | ||
| mpc5xx | ||
| mpc5xxx | ||
| mpc8xx | ||
| mpc83xx | ||
| mpc85xx | ||
| mpc86xx | ||
| mpc512x | ||
| mpc824x | ||
| mpc8220 | ||
| mpc8260 | ||
| nios | ||
| nios2 | ||
| ppc4xx | ||
| pxa | ||
| s3c44b0 | ||
| sa1100 | ||
| sh3 | ||
| sh4 | ||