mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
121 lines
2.9 KiB
C
121 lines
2.9 KiB
C
/*
|
|
* Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <linux/types.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#define ESDCTL_DDR2_EMR2 0x04000000
|
|
#define ESDCTL_DDR2_EMR3 0x06000000
|
|
#define ESDCTL_PRECHARGE 0x00000400
|
|
#define ESDCTL_DDR2_EN_DLL 0x02000400
|
|
#define ESDCTL_DDR2_RESET_DLL 0x00000333
|
|
#define ESDCTL_DDR2_MR 0x00000233
|
|
#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780
|
|
|
|
enum {
|
|
SMODE_NORMAL = 0,
|
|
SMODE_PRECHARGE,
|
|
SMODE_AUTO_REFRESH,
|
|
SMODE_LOAD_REG,
|
|
SMODE_MANUAL_REFRESH
|
|
};
|
|
|
|
#define set_mode(x, en, m) (x | (en << 31) | (m << 28))
|
|
|
|
static inline void dram_wait(unsigned int count)
|
|
{
|
|
volatile unsigned int wait = count;
|
|
|
|
while (wait--)
|
|
;
|
|
|
|
}
|
|
|
|
void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
|
|
u32 row, u32 col, u32 dsize, u32 refresh)
|
|
{
|
|
struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
|
|
u32 *cfg_reg, *ctl_reg;
|
|
u32 val;
|
|
u32 ctlval;
|
|
|
|
switch (start_address) {
|
|
case CSD0_BASE_ADDR:
|
|
cfg_reg = &esdc->esdcfg0;
|
|
ctl_reg = &esdc->esdctl0;
|
|
break;
|
|
case CSD1_BASE_ADDR:
|
|
cfg_reg = &esdc->esdcfg1;
|
|
ctl_reg = &esdc->esdctl1;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
/* The MX35 supports 11 up to 14 rows */
|
|
if (row < 11 || row > 14 || col < 8 || col > 10)
|
|
return;
|
|
ctlval = (row - 11) << 24 | (col - 8) << 20 | (dsize << 16);
|
|
|
|
/* Initialize MISC register for DDR2 */
|
|
val = ESDC_MISC_RST | ESDC_MISC_MDDR_EN | ESDC_MISC_MDDR_DL_RST |
|
|
ESDC_MISC_DDR_EN | ESDC_MISC_DDR2_EN;
|
|
writel(val, &esdc->esdmisc);
|
|
val &= ~(ESDC_MISC_RST | ESDC_MISC_MDDR_DL_RST);
|
|
writel(val, &esdc->esdmisc);
|
|
|
|
/*
|
|
* according to DDR2 specs, wait a while before
|
|
* the PRECHARGE_ALL command
|
|
*/
|
|
dram_wait(0x20000);
|
|
|
|
/* Load DDR2 config and timing */
|
|
writel(ddr2_config, cfg_reg);
|
|
|
|
/* Precharge ALL */
|
|
writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
|
|
ctl_reg);
|
|
writel(0xda, start_address + ESDCTL_PRECHARGE);
|
|
|
|
/* Load mode */
|
|
writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
|
|
ctl_reg);
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EMR2); /* EMRS2 */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EMR3); /* EMRS3 */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_RESET_DLL); /* Reset DLL */
|
|
|
|
/* Precharge ALL */
|
|
writel(set_mode(ctlval, 1, SMODE_PRECHARGE),
|
|
ctl_reg);
|
|
writel(0xda, start_address + ESDCTL_PRECHARGE);
|
|
|
|
/* Set mode auto refresh : at least two refresh are required */
|
|
writel(set_mode(ctlval, 1, SMODE_AUTO_REFRESH),
|
|
ctl_reg);
|
|
writel(0xda, start_address);
|
|
writel(0xda, start_address);
|
|
|
|
writel(set_mode(ctlval, 1, SMODE_LOAD_REG),
|
|
ctl_reg);
|
|
writeb(0xda, start_address + ESDCTL_DDR2_MR);
|
|
writeb(0xda, start_address + ESDCTL_DDR2_OCD_DEFAULT);
|
|
|
|
/* OCD mode exit */
|
|
writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */
|
|
|
|
/* Set normal mode */
|
|
writel(set_mode(ctlval, 1, SMODE_NORMAL) | refresh,
|
|
ctl_reg);
|
|
|
|
dram_wait(0x20000);
|
|
|
|
/* Do not set delay lines, only for MDDR */
|
|
}
|