mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-19 17:53:08 +00:00
51656ae1d1
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
67 lines
1.6 KiB
Text
67 lines
1.6 KiB
Text
if ROCKCHIP_PX30
|
|
|
|
config TARGET_EVB_PX30
|
|
bool "EVB_PX30"
|
|
help
|
|
This target config option used for below listed px30 boards.
|
|
|
|
EVB_PX30:
|
|
* EVB_PX30 is an evaluation board for Rockchip PX30.
|
|
|
|
config TARGET_ODROID_GO2
|
|
bool "ODROID_GO2"
|
|
|
|
config TARGET_PX30_CORE
|
|
bool "Engicam PX30.Core"
|
|
help
|
|
PX30.Core EDIMM2.2:
|
|
* PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
|
|
* EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam.
|
|
* PX30.Core needs to mount on top of EDIMM2.2 for creating complete
|
|
PX30.Core EDIMM2.2 Starter Kit.
|
|
|
|
PX30.Core CTOUCH2:
|
|
* PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
|
|
* CTOUCH2.0 is a general purpose Carrier board with capacitive
|
|
touch interface support.
|
|
* PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
|
|
PX30.Core C.TOUCH Carrier board.
|
|
|
|
config ROCKCHIP_BOOT_MODE_REG
|
|
default 0xff010200
|
|
|
|
config SYS_SOC
|
|
default "px30"
|
|
|
|
config SYS_MALLOC_F_LEN
|
|
default 0x400
|
|
|
|
config SPL_SERIAL_SUPPORT
|
|
default y
|
|
|
|
config TPL_LDSCRIPT
|
|
default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
|
|
|
|
config TPL_TEXT_BASE
|
|
default 0xff0e1000
|
|
|
|
config TPL_MAX_SIZE
|
|
default 10240
|
|
|
|
config TPL_STACK
|
|
default 0xff0e4fff
|
|
|
|
config DEBUG_UART_CHANNEL
|
|
int "Mux channel to use for debug UART2/UART3"
|
|
depends on DEBUG_UART_BOARD_INIT
|
|
default 0
|
|
help
|
|
UART2 and UART3 can use two different set of pins to route the output.
|
|
For using the UART for early debugging the route to use needs
|
|
to be declared (0 or 1).
|
|
|
|
source "board/engicam/px30_core/Kconfig"
|
|
source "board/hardkernel/odroid_go2/Kconfig"
|
|
source "board/rockchip/evb_px30/Kconfig"
|
|
|
|
endif
|