mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 17:10:11 +00:00
6c739c5d8a
Sunxi platforms come with at least 3 TWI (I2C) controllers and some platforms even have up to 5. This adds support for every controller on each supported platform, which is especially useful when using expansion ports on single-board- computers. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
489 lines
14 KiB
C
489 lines
14 KiB
C
/*
|
|
* (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
|
|
* (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
|
|
*
|
|
* (C) Copyright 2007-2011
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Tom Cubie <tangliang@allwinnertech.com>
|
|
*
|
|
* Some board init for the Allwinner A10-evb board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mmc.h>
|
|
#ifdef CONFIG_AXP152_POWER
|
|
#include <axp152.h>
|
|
#endif
|
|
#ifdef CONFIG_AXP209_POWER
|
|
#include <axp209.h>
|
|
#endif
|
|
#ifdef CONFIG_AXP221_POWER
|
|
#include <axp221.h>
|
|
#endif
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/display.h>
|
|
#include <asm/arch/dram.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/usbc.h>
|
|
#include <asm/io.h>
|
|
#include <linux/usb/musb.h>
|
|
#include <net.h>
|
|
|
|
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
|
|
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
|
|
int soft_i2c_gpio_sda;
|
|
int soft_i2c_gpio_scl;
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* add board specific code here */
|
|
int board_init(void)
|
|
{
|
|
int id_pfr1;
|
|
|
|
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
|
|
|
|
asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
|
|
debug("id_pfr1: 0x%08x\n", id_pfr1);
|
|
/* Generic Timer Extension available? */
|
|
if ((id_pfr1 >> 16) & 0xf) {
|
|
debug("Setting CNTFRQ\n");
|
|
/* CNTFRQ == 24 MHz */
|
|
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
static void mmc_pinmux_setup(int sdc)
|
|
{
|
|
unsigned int pin;
|
|
__maybe_unused int pins;
|
|
|
|
switch (sdc) {
|
|
case 0:
|
|
/* SDC0: PF0-PF5 */
|
|
for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPF_SDC0);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
pins = sunxi_name_to_gpio_bank(CONFIG_MMC1_PINS);
|
|
|
|
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
|
|
if (pins == SUNXI_GPIO_H) {
|
|
/* SDC1: PH22-PH-27 */
|
|
for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN4I_GPH_SDC1);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
} else {
|
|
/* SDC1: PG0-PG5 */
|
|
for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN4I_GPG_SDC1);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
}
|
|
#elif defined(CONFIG_MACH_SUN5I)
|
|
/* SDC1: PG3-PG8 */
|
|
for (pin = SUNXI_GPG(3); pin <= SUNXI_GPG(8); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN5I_GPG_SDC1);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
#elif defined(CONFIG_MACH_SUN6I)
|
|
/* SDC1: PG0-PG5 */
|
|
for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN6I_GPG_SDC1);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
#elif defined(CONFIG_MACH_SUN8I)
|
|
if (pins == SUNXI_GPIO_D) {
|
|
/* SDC1: PD2-PD7 */
|
|
for (pin = SUNXI_GPD(2); pin <= SUNXI_GPD(7); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN8I_GPD_SDC1);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
} else {
|
|
/* SDC1: PG0-PG5 */
|
|
for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN8I_GPG_SDC1);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
case 2:
|
|
pins = sunxi_name_to_gpio_bank(CONFIG_MMC2_PINS);
|
|
|
|
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
|
|
/* SDC2: PC6-PC11 */
|
|
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
#elif defined(CONFIG_MACH_SUN5I)
|
|
if (pins == SUNXI_GPIO_E) {
|
|
/* SDC2: PE4-PE9 */
|
|
for (pin = SUNXI_GPE(4); pin <= SUNXI_GPD(9); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN5I_GPE_SDC2);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
} else {
|
|
/* SDC2: PC6-PC15 */
|
|
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
}
|
|
#elif defined(CONFIG_MACH_SUN6I)
|
|
if (pins == SUNXI_GPIO_A) {
|
|
/* SDC2: PA9-PA14 */
|
|
for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_SDC2);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
} else {
|
|
/* SDC2: PC6-PC15, PC24 */
|
|
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_SDC2);
|
|
sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
|
|
}
|
|
#elif defined(CONFIG_MACH_SUN8I)
|
|
/* SDC2: PC5-PC6, PC8-PC16 */
|
|
for (pin = SUNXI_GPC(5); pin <= SUNXI_GPC(6); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
|
|
for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(16); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
case 3:
|
|
pins = sunxi_name_to_gpio_bank(CONFIG_MMC3_PINS);
|
|
|
|
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
|
|
/* SDC3: PI4-PI9 */
|
|
for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPI_SDC3);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
#elif defined(CONFIG_MACH_SUN6I)
|
|
if (pins == SUNXI_GPIO_A) {
|
|
/* SDC3: PA9-PA14 */
|
|
for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_SDC3);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
} else {
|
|
/* SDC3: PC6-PC15, PC24 */
|
|
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
|
|
sunxi_gpio_set_cfgpin(pin, SUN6I_GPC_SDC3);
|
|
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(pin, 2);
|
|
}
|
|
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUN6I_GPC_SDC3);
|
|
sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
|
|
sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
default:
|
|
printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
__maybe_unused struct mmc *mmc0, *mmc1;
|
|
__maybe_unused char buf[512];
|
|
|
|
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
|
|
mmc0 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
|
|
if (!mmc0)
|
|
return -1;
|
|
|
|
#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
|
|
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
|
|
mmc1 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
|
|
if (!mmc1)
|
|
return -1;
|
|
#endif
|
|
|
|
#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
|
|
/*
|
|
* Both mmc0 and mmc2 are bootable, figure out where we're booting
|
|
* from. Try mmc0 first, just like the brom does.
|
|
*/
|
|
if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
|
|
mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
|
|
buf[12] = 0;
|
|
if (strcmp(&buf[4], "eGON.BT0") == 0)
|
|
return 0;
|
|
}
|
|
|
|
/* no bootable card in mmc0, so we must be booting from mmc2, swap */
|
|
mmc0->block_dev.dev = 1;
|
|
mmc1->block_dev.dev = 0;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void i2c_init_board(void)
|
|
{
|
|
#ifdef CONFIG_I2C0_ENABLE
|
|
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
|
|
clock_twi_onoff(0, 1);
|
|
#elif defined(CONFIG_MACH_SUN6I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
|
|
clock_twi_onoff(0, 1);
|
|
#elif defined(CONFIG_MACH_SUN8I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
|
|
clock_twi_onoff(0, 1);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_I2C1_ENABLE
|
|
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
|
|
clock_twi_onoff(1, 1);
|
|
#elif defined(CONFIG_MACH_SUN5I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
|
|
clock_twi_onoff(1, 1);
|
|
#elif defined(CONFIG_MACH_SUN6I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
|
|
clock_twi_onoff(1, 1);
|
|
#elif defined(CONFIG_MACH_SUN8I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
|
|
clock_twi_onoff(1, 1);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_I2C2_ENABLE
|
|
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
|
|
clock_twi_onoff(2, 1);
|
|
#elif defined(CONFIG_MACH_SUN5I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
|
|
clock_twi_onoff(2, 1);
|
|
#elif defined(CONFIG_MACH_SUN6I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
|
|
clock_twi_onoff(2, 1);
|
|
#elif defined(CONFIG_MACH_SUN8I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
|
|
clock_twi_onoff(2, 1);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_I2C3_ENABLE
|
|
#if defined(CONFIG_MACH_SUN6I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
|
|
clock_twi_onoff(3, 1);
|
|
#elif defined(CONFIG_MACH_SUN7I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
|
|
clock_twi_onoff(3, 1);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_I2C4_ENABLE
|
|
#if defined(CONFIG_MACH_SUN7I)
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
|
|
clock_twi_onoff(4, 1);
|
|
#endif
|
|
#endif
|
|
|
|
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
|
|
soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
|
|
soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void sunxi_board_init(void)
|
|
{
|
|
int power_failed = 0;
|
|
unsigned long ramsize;
|
|
|
|
#ifdef CONFIG_AXP152_POWER
|
|
power_failed = axp152_init();
|
|
power_failed |= axp152_set_dcdc2(1400);
|
|
power_failed |= axp152_set_dcdc3(1500);
|
|
power_failed |= axp152_set_dcdc4(1250);
|
|
power_failed |= axp152_set_ldo2(3000);
|
|
#endif
|
|
#ifdef CONFIG_AXP209_POWER
|
|
power_failed |= axp209_init();
|
|
power_failed |= axp209_set_dcdc2(1400);
|
|
power_failed |= axp209_set_dcdc3(1250);
|
|
power_failed |= axp209_set_ldo2(3000);
|
|
power_failed |= axp209_set_ldo3(2800);
|
|
power_failed |= axp209_set_ldo4(2800);
|
|
#endif
|
|
#ifdef CONFIG_AXP221_POWER
|
|
power_failed = axp221_init();
|
|
power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT);
|
|
power_failed |= axp221_set_dcdc2(1200); /* A31:VDD-GPU, A23:VDD-SYS */
|
|
power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */
|
|
#ifdef CONFIG_MACH_SUN6I
|
|
power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */
|
|
#else
|
|
power_failed |= axp221_set_dcdc4(0); /* A23:unused */
|
|
#endif
|
|
power_failed |= axp221_set_dcdc5(1500); /* VCC-DRAM */
|
|
power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT);
|
|
power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT);
|
|
power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
|
|
power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
|
|
power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
|
|
power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
|
|
#endif
|
|
|
|
printf("DRAM:");
|
|
ramsize = sunxi_dram_init();
|
|
printf(" %lu MiB\n", ramsize >> 20);
|
|
if (!ramsize)
|
|
hang();
|
|
|
|
/*
|
|
* Only clock up the CPU to full speed if we are reasonably
|
|
* assured it's being powered with suitable core voltage
|
|
*/
|
|
if (!power_failed)
|
|
clock_set_pll1(CONFIG_SYS_CLK_FREQ);
|
|
else
|
|
printf("Failed to set core voltage! Can't set CPU frequency\n");
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
|
|
static struct musb_hdrc_config musb_config = {
|
|
.multipoint = 1,
|
|
.dyn_fifo = 1,
|
|
.num_eps = 6,
|
|
.ram_bits = 11,
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data musb_plat = {
|
|
#if defined(CONFIG_MUSB_HOST)
|
|
.mode = MUSB_HOST,
|
|
#else
|
|
.mode = MUSB_PERIPHERAL,
|
|
#endif
|
|
.config = &musb_config,
|
|
.power = 250,
|
|
.platform_ops = &sunxi_musb_ops,
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_GADGET
|
|
int g_dnl_board_usb_cable_connected(void)
|
|
{
|
|
return sunxi_usbc_vbus_detect(0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
int misc_init_r(void)
|
|
{
|
|
char serial_string[17] = { 0 };
|
|
unsigned int sid[4];
|
|
uint8_t mac_addr[6];
|
|
int ret;
|
|
|
|
ret = sunxi_get_sid(sid);
|
|
if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
|
|
if (!getenv("ethaddr")) {
|
|
/* Non OUI / registered MAC address */
|
|
mac_addr[0] = 0x02;
|
|
mac_addr[1] = (sid[0] >> 0) & 0xff;
|
|
mac_addr[2] = (sid[3] >> 24) & 0xff;
|
|
mac_addr[3] = (sid[3] >> 16) & 0xff;
|
|
mac_addr[4] = (sid[3] >> 8) & 0xff;
|
|
mac_addr[5] = (sid[3] >> 0) & 0xff;
|
|
|
|
eth_setenv_enetaddr("ethaddr", mac_addr);
|
|
}
|
|
|
|
if (!getenv("serial#")) {
|
|
snprintf(serial_string, sizeof(serial_string),
|
|
"%08x%08x", sid[0], sid[3]);
|
|
|
|
setenv("serial#", serial_string);
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
|
|
musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
|
|
return sunxi_simplefb_setup(blob);
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_OF_BOARD_SETUP */
|