u-boot/drivers/serial/serial_sh.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

370 lines
7.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* SuperH SCIF device driver.
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2007,2008,2010, 2014 Nobuhiro Iwamatsu
* Copyright (C) 2002 - 2008 Paul Mundt
*/
#include <common.h>
#include <errno.h>
#include <clk.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <serial.h>
#include <linux/compiler.h>
#include <dm/platform_data/serial_sh.h>
#include "serial_sh.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCRFDR) & 0xff;
}
#elif defined(CONFIG_CPU_SH7763)
static int scif_rxfill(struct uart_port *port)
{
if ((port->mapbase == 0xffe00000) ||
(port->mapbase == 0xffe08000)) {
/* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
} else {
/* SCIF2 */
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
#elif defined(CONFIG_ARCH_SH7372)
static int scif_rxfill(struct uart_port *port)
{
if (port->type == PORT_SCIFA)
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
else
return sci_in(port, SCRFDR);
}
#else
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
static void sh_serial_init_generic(struct uart_port *port)
{
sci_out(port, SCSCR , SCSCR_INIT(port));
sci_out(port, SCSCR , SCSCR_INIT(port));
sci_out(port, SCSMR, 0);
sci_out(port, SCSMR, 0);
sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
sci_in(port, SCFCR);
sci_out(port, SCFCR, 0);
}
static void
sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate)
{
if (port->clk_mode == EXT_CLK) {
unsigned short dl = DL_VALUE(baudrate, clk);
sci_out(port, DL, dl);
/* Need wait: Clock * 1/dl * 1/16 */
udelay((1000000 * dl * 16 / clk) * 1000 + 1);
} else {
sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk));
}
}
static void handle_error(struct uart_port *port)
{
sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
sci_in(port, SCLSR);
sci_out(port, SCLSR, 0x00);
}
static int serial_raw_putc(struct uart_port *port, const char c)
{
/* Tx fifo is empty */
if (!(sci_in(port, SCxSR) & SCxSR_TEND(port)))
return -EAGAIN;
sci_out(port, SCxTDR, c);
sci_out(port, SCxSR, sci_in(port, SCxSR) & ~SCxSR_TEND(port));
return 0;
}
static int serial_rx_fifo_level(struct uart_port *port)
{
return scif_rxfill(port);
}
static int sh_serial_tstc_generic(struct uart_port *port)
{
if (sci_in(port, SCxSR) & SCIF_ERRORS) {
handle_error(port);
return 0;
}
return serial_rx_fifo_level(port) ? 1 : 0;
}
static int serial_getc_check(struct uart_port *port)
{
unsigned short status;
status = sci_in(port, SCxSR);
if (status & SCIF_ERRORS)
handle_error(port);
if (sci_in(port, SCLSR) & SCxSR_ORER(port))
handle_error(port);
return status & (SCIF_DR | SCxSR_RDxF(port));
}
static int sh_serial_getc_generic(struct uart_port *port)
{
unsigned short status;
char ch;
if (!serial_getc_check(port))
return -EAGAIN;
ch = sci_in(port, SCxRDR);
status = sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
if (status & SCIF_ERRORS)
handle_error(port);
if (sci_in(port, SCLSR) & SCxSR_ORER(port))
handle_error(port);
return ch;
}
#if CONFIG_IS_ENABLED(DM_SERIAL)
static int sh_serial_pending(struct udevice *dev, bool input)
{
struct uart_port *priv = dev_get_priv(dev);
return sh_serial_tstc_generic(priv);
}
static int sh_serial_putc(struct udevice *dev, const char ch)
{
struct uart_port *priv = dev_get_priv(dev);
return serial_raw_putc(priv, ch);
}
static int sh_serial_getc(struct udevice *dev)
{
struct uart_port *priv = dev_get_priv(dev);
return sh_serial_getc_generic(priv);
}
static int sh_serial_setbrg(struct udevice *dev, int baudrate)
{
struct sh_serial_platdata *plat = dev_get_platdata(dev);
struct uart_port *priv = dev_get_priv(dev);
sh_serial_setbrg_generic(priv, plat->clk, baudrate);
return 0;
}
static int sh_serial_probe(struct udevice *dev)
{
struct sh_serial_platdata *plat = dev_get_platdata(dev);
struct uart_port *priv = dev_get_priv(dev);
priv->membase = (unsigned char *)plat->base;
priv->mapbase = plat->base;
priv->type = plat->type;
priv->clk_mode = plat->clk_mode;
sh_serial_init_generic(priv);
return 0;
}
static const struct dm_serial_ops sh_serial_ops = {
.putc = sh_serial_putc,
.pending = sh_serial_pending,
.getc = sh_serial_getc,
.setbrg = sh_serial_setbrg,
};
#if CONFIG_IS_ENABLED(OF_CONTROL)
static const struct udevice_id sh_serial_id[] ={
{.compatible = "renesas,sci", .data = PORT_SCI},
{.compatible = "renesas,scif", .data = PORT_SCIF},
{.compatible = "renesas,scifa", .data = PORT_SCIFA},
{}
};
static int sh_serial_ofdata_to_platdata(struct udevice *dev)
{
struct sh_serial_platdata *plat = dev_get_platdata(dev);
struct clk sh_serial_clk;
fdt_addr_t addr;
int ret;
addr = devfdt_get_addr(dev);
if (!addr)
return -EINVAL;
plat->base = addr;
ret = clk_get_by_name(dev, "fck", &sh_serial_clk);
if (!ret) {
ret = clk_enable(&sh_serial_clk);
if (!ret)
plat->clk = clk_get_rate(&sh_serial_clk);
} else {
plat->clk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"clock", 1);
}
plat->type = dev_get_driver_data(dev);
return 0;
}
#endif
U_BOOT_DRIVER(serial_sh) = {
.name = "serial_sh",
.id = UCLASS_SERIAL,
.of_match = of_match_ptr(sh_serial_id),
.ofdata_to_platdata = of_match_ptr(sh_serial_ofdata_to_platdata),
.platdata_auto_alloc_size = sizeof(struct sh_serial_platdata),
.probe = sh_serial_probe,
.ops = &sh_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
.priv_auto_alloc_size = sizeof(struct uart_port),
};
#else /* CONFIG_DM_SERIAL */
#if defined(CONFIG_CONS_SCIF0)
# define SCIF_BASE SCIF0_BASE
#elif defined(CONFIG_CONS_SCIF1)
# define SCIF_BASE SCIF1_BASE
#elif defined(CONFIG_CONS_SCIF2)
# define SCIF_BASE SCIF2_BASE
#elif defined(CONFIG_CONS_SCIF3)
# define SCIF_BASE SCIF3_BASE
#elif defined(CONFIG_CONS_SCIF4)
# define SCIF_BASE SCIF4_BASE
#elif defined(CONFIG_CONS_SCIF5)
# define SCIF_BASE SCIF5_BASE
#elif defined(CONFIG_CONS_SCIF6)
# define SCIF_BASE SCIF6_BASE
#elif defined(CONFIG_CONS_SCIF7)
# define SCIF_BASE SCIF7_BASE
#elif defined(CONFIG_CONS_SCIFA0)
# define SCIF_BASE SCIFA0_BASE
#else
# error "Default SCIF doesn't set....."
#endif
#if defined(CONFIG_SCIF_A)
#define SCIF_BASE_PORT PORT_SCIFA
#elif defined(CONFIG_SCI)
#define SCIF_BASE_PORT PORT_SCI
#else
#define SCIF_BASE_PORT PORT_SCIF
#endif
static struct uart_port sh_sci = {
.membase = (unsigned char *)SCIF_BASE,
.mapbase = SCIF_BASE,
.type = SCIF_BASE_PORT,
#ifdef CONFIG_SCIF_USE_EXT_CLK
.clk_mode = EXT_CLK,
#endif
};
static void sh_serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
struct uart_port *port = &sh_sci;
sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate);
}
static int sh_serial_init(void)
{
struct uart_port *port = &sh_sci;
sh_serial_init_generic(port);
serial_setbrg();
return 0;
}
static void sh_serial_putc(const char c)
{
struct uart_port *port = &sh_sci;
if (c == '\n') {
while (1) {
if (serial_raw_putc(port, '\r') != -EAGAIN)
break;
}
}
while (1) {
if (serial_raw_putc(port, c) != -EAGAIN)
break;
}
}
static int sh_serial_tstc(void)
{
struct uart_port *port = &sh_sci;
return sh_serial_tstc_generic(port);
}
static int sh_serial_getc(void)
{
struct uart_port *port = &sh_sci;
int ch;
while (1) {
ch = sh_serial_getc_generic(port);
if (ch != -EAGAIN)
break;
}
return ch;
}
static struct serial_device sh_serial_drv = {
.name = "sh_serial",
.start = sh_serial_init,
.stop = NULL,
.setbrg = sh_serial_setbrg,
.putc = sh_serial_putc,
.puts = default_serial_puts,
.getc = sh_serial_getc,
.tstc = sh_serial_tstc,
};
void sh_serial_initialize(void)
{
serial_register(&sh_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &sh_serial_drv;
}
#endif /* CONFIG_DM_SERIAL */