mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 16:10:58 +00:00
257 lines
6.7 KiB
C
257 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <serial.h>
|
|
#include <watchdog.h>
|
|
#include <asm/cpm_8xx.h>
|
|
#include <linux/compiler.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
|
|
#define SMC_INDEX 0
|
|
#define PROFF_SMC PROFF_SMC1
|
|
#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
|
|
#define IOPINS 0xc0
|
|
|
|
#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
|
|
#define SMC_INDEX 1
|
|
#define PROFF_SMC PROFF_SMC2
|
|
#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
|
|
#define IOPINS 0xc00
|
|
|
|
#endif /* CONFIG_8xx_CONS_SMCx */
|
|
|
|
struct serialbuffer {
|
|
cbd_t rxbd; /* Rx BD */
|
|
cbd_t txbd; /* Tx BD */
|
|
uint rxindex; /* index for next character to read */
|
|
uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
|
|
uchar txbuf; /* tx buffers */
|
|
};
|
|
|
|
static void serial_setdivisor(cpm8xx_t __iomem *cp, int baudrate)
|
|
{
|
|
int divisor = (gd->cpu_clk + 8 * baudrate) / 16 / baudrate;
|
|
|
|
if (divisor / 16 > 0x1000) {
|
|
/* bad divisor, assume 50MHz clock and 9600 baud */
|
|
divisor = (50 * 1000 * 1000 + 8 * 9600) / 16 / 9600;
|
|
}
|
|
|
|
divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
|
|
|
|
if (divisor <= 0x1000)
|
|
out_be32(&cp->cp_brgc1, ((divisor - 1) << 1) | CPM_BRG_EN);
|
|
else
|
|
out_be32(&cp->cp_brgc1, ((divisor / 16 - 1) << 1) | CPM_BRG_EN |
|
|
CPM_BRG_DIV16);
|
|
}
|
|
|
|
/*
|
|
* Minimal serial functions needed to use one of the SMC ports
|
|
* as serial console interface.
|
|
*/
|
|
|
|
static int serial_mpc8xx_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
cpm8xx_t __iomem *cp = &(im->im_cpm);
|
|
|
|
/* Set up the baud rate generator.
|
|
* See 8xx_io/commproc.c for details.
|
|
*
|
|
* Wire BRG1 to SMCx
|
|
*/
|
|
|
|
out_be32(&cp->cp_simode, 0);
|
|
|
|
serial_setdivisor(cp, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_mpc8xx_probe(struct udevice *dev)
|
|
{
|
|
immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
smc_t __iomem *sp;
|
|
smc_uart_t __iomem *up;
|
|
cpm8xx_t __iomem *cp = &(im->im_cpm);
|
|
struct serialbuffer __iomem *rtx;
|
|
|
|
/* initialize pointers to SMC */
|
|
|
|
sp = cp->cp_smc + SMC_INDEX;
|
|
up = (smc_uart_t __iomem *)&cp->cp_dparam[PROFF_SMC];
|
|
/* Disable relocation */
|
|
out_be16(&up->smc_rpbase, 0);
|
|
|
|
/* Disable transmitter/receiver. */
|
|
clrbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
|
|
|
/* Enable SDMA. */
|
|
out_be32(&im->im_siu_conf.sc_sdcr, 1);
|
|
|
|
/* clear error conditions */
|
|
out_8(&im->im_sdma.sdma_sdsr, CONFIG_SYS_SDSR);
|
|
|
|
/* clear SDMA interrupt mask */
|
|
out_8(&im->im_sdma.sdma_sdmr, CONFIG_SYS_SDMR);
|
|
|
|
/* Use Port B for SMCx instead of other functions. */
|
|
setbits_be32(&cp->cp_pbpar, IOPINS);
|
|
clrbits_be32(&cp->cp_pbdir, IOPINS);
|
|
clrbits_be16(&cp->cp_pbodr, IOPINS);
|
|
|
|
/* Set the physical address of the host memory buffers in
|
|
* the buffer descriptors.
|
|
*/
|
|
rtx = (struct serialbuffer __iomem *)&cp->cp_dpmem[CPM_SERIAL_BASE];
|
|
/* Allocate space for two buffer descriptors in the DP ram.
|
|
* For now, this address seems OK, but it may have to
|
|
* change with newer versions of the firmware.
|
|
* damm: allocating space after the two buffers for rx/tx data
|
|
*/
|
|
|
|
out_be32(&rtx->rxbd.cbd_bufaddr, (__force uint)&rtx->rxbuf);
|
|
out_be16(&rtx->rxbd.cbd_sc, 0);
|
|
|
|
out_be32(&rtx->txbd.cbd_bufaddr, (__force uint)&rtx->txbuf);
|
|
out_be16(&rtx->txbd.cbd_sc, 0);
|
|
|
|
/* Set up the uart parameters in the parameter ram. */
|
|
out_be16(&up->smc_rbase, CPM_SERIAL_BASE);
|
|
out_be16(&up->smc_tbase, CPM_SERIAL_BASE + sizeof(cbd_t));
|
|
out_8(&up->smc_rfcr, SMC_EB);
|
|
out_8(&up->smc_tfcr, SMC_EB);
|
|
|
|
/* Set UART mode, 8 bit, no parity, one stop.
|
|
* Enable receive and transmit.
|
|
*/
|
|
out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART);
|
|
|
|
/* Mask all interrupts and remove anything pending.
|
|
*/
|
|
out_8(&sp->smc_smcm, 0);
|
|
out_8(&sp->smc_smce, 0xff);
|
|
|
|
/* Set up the baud rate generator */
|
|
serial_mpc8xx_setbrg(dev, gd->baudrate);
|
|
|
|
/* Make the first buffer the only buffer. */
|
|
setbits_be16(&rtx->txbd.cbd_sc, BD_SC_WRAP);
|
|
setbits_be16(&rtx->rxbd.cbd_sc, BD_SC_EMPTY | BD_SC_WRAP);
|
|
|
|
/* single/multi character receive. */
|
|
out_be16(&up->smc_mrblr, CONFIG_SYS_SMC_RXBUFLEN);
|
|
out_be16(&up->smc_maxidl, CONFIG_SYS_MAXIDLE);
|
|
out_be32(&rtx->rxindex, 0);
|
|
|
|
/* Initialize Tx/Rx parameters. */
|
|
while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */
|
|
;
|
|
|
|
out_be16(&cp->cp_cpcr,
|
|
mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG);
|
|
|
|
while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */
|
|
;
|
|
|
|
/* Enable transmitter/receiver. */
|
|
setbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_mpc8xx_putc(struct udevice *dev, const char c)
|
|
{
|
|
immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
cpm8xx_t __iomem *cpmp = &(im->im_cpm);
|
|
struct serialbuffer __iomem *rtx;
|
|
|
|
if (c == '\n')
|
|
serial_mpc8xx_putc(dev, '\r');
|
|
|
|
rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE];
|
|
|
|
/* Wait for last character to go. */
|
|
out_8(&rtx->txbuf, c);
|
|
out_be16(&rtx->txbd.cbd_datlen, 1);
|
|
setbits_be16(&rtx->txbd.cbd_sc, BD_SC_READY);
|
|
|
|
while (in_be16(&rtx->txbd.cbd_sc) & BD_SC_READY)
|
|
WATCHDOG_RESET();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_mpc8xx_getc(struct udevice *dev)
|
|
{
|
|
immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
cpm8xx_t __iomem *cpmp = &(im->im_cpm);
|
|
struct serialbuffer __iomem *rtx;
|
|
unsigned char c;
|
|
uint rxindex;
|
|
|
|
rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE];
|
|
|
|
/* Wait for character to show up. */
|
|
while (in_be16(&rtx->rxbd.cbd_sc) & BD_SC_EMPTY)
|
|
WATCHDOG_RESET();
|
|
|
|
/* the characters are read one by one,
|
|
* use the rxindex to know the next char to deliver
|
|
*/
|
|
rxindex = in_be32(&rtx->rxindex);
|
|
c = in_8(rtx->rxbuf + rxindex);
|
|
rxindex++;
|
|
|
|
/* check if all char are readout, then make prepare for next receive */
|
|
if (rxindex >= in_be16(&rtx->rxbd.cbd_datlen)) {
|
|
rxindex = 0;
|
|
setbits_be16(&rtx->rxbd.cbd_sc, BD_SC_EMPTY);
|
|
}
|
|
out_be32(&rtx->rxindex, rxindex);
|
|
return c;
|
|
}
|
|
|
|
static int serial_mpc8xx_pending(struct udevice *dev, bool input)
|
|
{
|
|
immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
|
|
cpm8xx_t __iomem *cpmp = &(im->im_cpm);
|
|
struct serialbuffer __iomem *rtx;
|
|
|
|
if (!input)
|
|
return 0;
|
|
|
|
rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE];
|
|
|
|
return !(in_be16(&rtx->rxbd.cbd_sc) & BD_SC_EMPTY);
|
|
}
|
|
|
|
static const struct dm_serial_ops serial_mpc8xx_ops = {
|
|
.putc = serial_mpc8xx_putc,
|
|
.pending = serial_mpc8xx_pending,
|
|
.getc = serial_mpc8xx_getc,
|
|
.setbrg = serial_mpc8xx_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id serial_mpc8xx_ids[] = {
|
|
{ .compatible = "fsl,pq1-smc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_mpc8xx) = {
|
|
.name = "serial_mpc8xx",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = serial_mpc8xx_ids,
|
|
.probe = serial_mpc8xx_probe,
|
|
.ops = &serial_mpc8xx_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|