mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
283 lines
6.5 KiB
C
283 lines
6.5 KiB
C
/*
|
|
* (C) Copyright 2000-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2002
|
|
* Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc824x.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
#include <ide.h>
|
|
#include <netdev.h>
|
|
#include <timestamp.h>
|
|
#include "piix_pci.h"
|
|
#include "eXalion.h"
|
|
|
|
int checkboard (void)
|
|
{
|
|
ulong busfreq = get_bus_freq (0);
|
|
char buf[32];
|
|
|
|
printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
|
|
printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
|
|
printf ("Local Bus: %s MHz\n", strmhz (buf, busfreq));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkflash (void)
|
|
{
|
|
printf ("checkflash\n");
|
|
flash_init ();
|
|
return (0);
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
int i, cnt;
|
|
volatile uchar *base = CONFIG_SYS_SDRAM_BASE;
|
|
volatile ulong *addr;
|
|
ulong save[32];
|
|
ulong val, ret = 0;
|
|
|
|
for (i = 0, cnt = (CONFIG_SYS_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
|
|
cnt >>= 1) {
|
|
addr = (volatile ulong *) base + cnt;
|
|
save[i++] = *addr;
|
|
*addr = ~cnt;
|
|
}
|
|
|
|
addr = (volatile ulong *) base;
|
|
save[i] = *addr;
|
|
*addr = 0;
|
|
|
|
if (*addr != 0) {
|
|
*addr = save[i];
|
|
goto Done;
|
|
}
|
|
|
|
for (cnt = 1; cnt <= CONFIG_SYS_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
|
|
addr = (volatile ulong *) base + cnt;
|
|
val = *addr;
|
|
*addr = save[--i];
|
|
if (val != ~cnt) {
|
|
ulong new_bank0_end = cnt * sizeof (long) - 1;
|
|
ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
|
|
ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);
|
|
|
|
mear1 = (mear1 & 0xFFFFFF00) |
|
|
((new_bank0_end & MICR_ADDR_MASK) >>
|
|
MICR_ADDR_SHIFT);
|
|
emear1 = (emear1 & 0xFFFFFF00) |
|
|
((new_bank0_end & MICR_ADDR_MASK) >>
|
|
MICR_EADDR_SHIFT);
|
|
mpc824x_mpc107_setreg (MEAR1, mear1);
|
|
mpc824x_mpc107_setreg (EMEAR1, emear1);
|
|
|
|
ret = cnt * sizeof (long);
|
|
goto Done;
|
|
}
|
|
}
|
|
|
|
ret = CONFIG_SYS_MAX_RAM_SIZE;
|
|
Done:
|
|
return ret;
|
|
}
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
pci_dev_t bdf;
|
|
u32 val32;
|
|
u8 val8;
|
|
|
|
puts ("ISA: ");
|
|
bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_ISA_DEV_ID, 0);
|
|
if (bdf == -1) {
|
|
puts ("Unable to find PIIX4 ISA bridge !\n");
|
|
hang ();
|
|
}
|
|
|
|
/* set device for normal ISA instead EIO */
|
|
pci_read_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, &val32);
|
|
val32 |= 0x00000001;
|
|
pci_write_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, val32);
|
|
printf ("PIIX4 ISA bridge (%d,%d,%d)\n", PCI_BUS (bdf),
|
|
PCI_DEV (bdf), PCI_FUNC (bdf));
|
|
|
|
puts ("ISA: ");
|
|
bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_IDE_DEV_ID, 0);
|
|
if (bdf == -1) {
|
|
puts ("Unable to find PIIX4 IDE controller !\n");
|
|
hang ();
|
|
}
|
|
|
|
/* Init BMIBA register */
|
|
/* pci_read_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, &val32); */
|
|
/* val32 |= 0x1000; */
|
|
/* pci_write_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, val32); */
|
|
|
|
/* Enable BUS master and IO access */
|
|
val32 = PCI_COMMAND_MASTER | PCI_COMMAND_IO;
|
|
pci_write_config_dword (bdf, PCI_COMMAND, val32);
|
|
|
|
/* Set latency */
|
|
pci_read_config_byte (bdf, PCI_LATENCY_TIMER, &val8);
|
|
val8 = 0x40;
|
|
pci_write_config_byte (bdf, PCI_LATENCY_TIMER, val8);
|
|
|
|
/* Enable Primary ATA/IDE */
|
|
pci_read_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, &val32);
|
|
/* val32 = 0xa307a307; */
|
|
val32 = 0x00008000;
|
|
pci_write_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, val32);
|
|
|
|
|
|
printf ("PIIX4 IDE controller (%d,%d,%d)\n", PCI_BUS (bdf),
|
|
PCI_DEV (bdf), PCI_FUNC (bdf));
|
|
|
|
/* Try to get FAT working... */
|
|
/* fat_register_read(ide_read); */
|
|
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Show/Init PCI devices on the specified bus number.
|
|
*/
|
|
|
|
void pci_eXalion_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
|
|
{
|
|
unsigned char line;
|
|
|
|
switch (PCI_DEV (dev)) {
|
|
case 16:
|
|
line = PCI_INT_A;
|
|
break;
|
|
case 17:
|
|
line = PCI_INT_B;
|
|
break;
|
|
case 18:
|
|
line = PCI_INT_C;
|
|
break;
|
|
case 19:
|
|
line = PCI_INT_D;
|
|
break;
|
|
#if defined (CONFIG_MPC8245)
|
|
case 20:
|
|
line = PCI_INT_A;
|
|
break;
|
|
case 21:
|
|
line = PCI_INT_B;
|
|
break;
|
|
case 22:
|
|
line = PCI_INT_NA;
|
|
break;
|
|
#endif
|
|
default:
|
|
line = PCI_INT_A;
|
|
break;
|
|
}
|
|
pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, line);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize PCI Devices, report devices found.
|
|
*/
|
|
#ifndef CONFIG_PCI_PNP
|
|
#if defined (CONFIG_MPC8240)
|
|
static struct pci_config_table pci_eXalion_config_table[] = {
|
|
{
|
|
/* Intel 82559ER ethernet controller */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
|
|
pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER}},
|
|
{
|
|
/* Intel 82371AB PIIX4 PCI to ISA bridge */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
|
|
pci_cfgfunc_config_device, {0,
|
|
0,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
|
|
{
|
|
/* Intel 82371AB PIIX4 IDE controller */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x01,
|
|
pci_cfgfunc_config_device, {0,
|
|
0,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
|
|
{}
|
|
};
|
|
#elif defined (CONFIG_MPC8245)
|
|
static struct pci_config_table pci_eXalion_config_table[] = {
|
|
{
|
|
/* Intel 82559ER ethernet controller */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 17, 0x00,
|
|
pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER}},
|
|
{
|
|
/* Intel 82559ER ethernet controller */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
|
|
pci_cfgfunc_config_device, {PCI_ENET1_IOADDR,
|
|
PCI_ENET1_MEMADDR,
|
|
PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER}},
|
|
{
|
|
/* Broadcom BCM5690 Gigabit switch */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
|
|
pci_cfgfunc_config_device, {PCI_ENET2_IOADDR,
|
|
PCI_ENET2_MEMADDR,
|
|
PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER}},
|
|
{
|
|
/* Broadcom BCM5690 Gigabit switch */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 21, 0x00,
|
|
pci_cfgfunc_config_device, {PCI_ENET3_IOADDR,
|
|
PCI_ENET3_MEMADDR,
|
|
PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER}},
|
|
{
|
|
/* Intel 82371AB PIIX4 PCI to ISA bridge */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x00,
|
|
pci_cfgfunc_config_device, {0,
|
|
0,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
|
|
{
|
|
/* Intel 82371AB PIIX4 IDE controller */
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x01,
|
|
pci_cfgfunc_config_device, {0,
|
|
0,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
|
|
{}
|
|
};
|
|
#else
|
|
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
|
|
#endif
|
|
|
|
#endif /* #ifndef CONFIG_PCI_PNP */
|
|
|
|
struct pci_controller hose = {
|
|
#ifndef CONFIG_PCI_PNP
|
|
config_table:pci_eXalion_config_table,
|
|
fixup_irq:pci_eXalion_fixup_irq,
|
|
#endif
|
|
};
|
|
|
|
void pci_init_board (void)
|
|
{
|
|
pci_mpc824x_init (&hose);
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
return pci_eth_init(bis);
|
|
}
|