u-boot/include/max8998_pmic.h
Łukasz Majewski 4d86bf0860 ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement
This patch enables LDO4 power line for preparing proper voltages to be
measured by ADC converter.
This measurement is used for determination of target board HW revision.

Test HW:
Universal_C210 (Exynos4210) rev. 0.0

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-05-15 08:31:28 +02:00

86 lines
2.2 KiB
C

/*
* Copyright (C) 2011 Samsung Electronics
* Lukasz Majewski <l.majewski@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __MAX8998_PMIC_H_
#define __MAX8998_PMIC_H_
/* MAX 8998 registers */
enum {
MAX8998_REG_IRQ1,
MAX8998_REG_IRQ2,
MAX8998_REG_IRQ3,
MAX8998_REG_IRQ4,
MAX8998_REG_IRQM1,
MAX8998_REG_IRQM2,
MAX8998_REG_IRQM3,
MAX8998_REG_IRQM4,
MAX8998_REG_STATUS1,
MAX8998_REG_STATUS2,
MAX8998_REG_STATUSM1,
MAX8998_REG_STATUSM2,
MAX8998_REG_CHGR1,
MAX8998_REG_CHGR2,
MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
MAX8998_REG_ONOFF1,
MAX8998_REG_ONOFF2,
MAX8998_REG_ONOFF3,
MAX8998_REG_ONOFF4,
MAX8998_REG_BUCK1_VOLTAGE1,
MAX8998_REG_BUCK1_VOLTAGE2,
MAX8998_REG_BUCK1_VOLTAGE3,
MAX8998_REG_BUCK1_VOLTAGE4,
MAX8998_REG_BUCK2_VOLTAGE1,
MAX8998_REG_BUCK2_VOLTAGE2,
MAX8998_REG_BUCK3,
MAX8998_REG_BUCK4,
MAX8998_REG_LDO2_LDO3,
MAX8998_REG_LDO4,
MAX8998_REG_LDO5,
MAX8998_REG_LDO6,
MAX8998_REG_LDO7,
MAX8998_REG_LDO8_LDO9,
MAX8998_REG_LDO10_LDO11,
MAX8998_REG_LDO12,
MAX8998_REG_LDO13,
MAX8998_REG_LDO14,
MAX8998_REG_LDO15,
MAX8998_REG_LDO16,
MAX8998_REG_LDO17,
MAX8998_REG_BKCHR,
MAX8998_REG_LBCNFG1,
MAX8998_REG_LBCNFG2,
PMIC_NUM_OF_REGS,
};
#define MAX8998_LDO3 (1 << 2)
#define MAX8998_LDO4 (1 << 1)
#define MAX8998_LDO8 (1 << 5)
#define MAX8998_SAFEOUT1 (1 << 4)
#define MAX8998_I2C_ADDR (0xCC >> 1)
enum { LDO_OFF, LDO_ON };
#endif /* __MAX8998_PMIC_H_ */