mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
129 lines
3 KiB
C
129 lines
3 KiB
C
/*
|
|
* (C) Copyright 2006
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#if defined(CONFIG_CMD_NAND)
|
|
|
|
#include <nand.h>
|
|
|
|
struct pdnb3_ndfc_regs {
|
|
uchar cmd;
|
|
uchar wait;
|
|
uchar addr;
|
|
uchar term;
|
|
uchar data;
|
|
};
|
|
|
|
static u8 hwctl;
|
|
static struct pdnb3_ndfc_regs *pdnb3_ndfc;
|
|
|
|
#define readb(addr) *(volatile u_char *)(addr)
|
|
#define readl(addr) *(volatile u_long *)(addr)
|
|
#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
|
|
|
|
/*
|
|
* The PDNB3 has a NAND Flash Controller (NDFC) that handles all accesses to
|
|
* the NAND devices. The NDFC has command, address and data registers that
|
|
* when accessed will set up the NAND flash pins appropriately. We'll use the
|
|
* hwcontrol function to save the configuration in a global variable.
|
|
* We can then use this information in the read and write functions to
|
|
* determine which NDFC register to access.
|
|
*
|
|
* There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte).
|
|
*/
|
|
static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
if ( ctrl & NAND_CLE )
|
|
hwctl |= 0x1;
|
|
else
|
|
hwctl &= ~0x1;
|
|
if ( ctrl & NAND_ALE )
|
|
hwctl |= 0x2;
|
|
else
|
|
hwctl &= ~0x2;
|
|
if ( (ctrl & NAND_NCE) != NAND_NCE)
|
|
writeb(0x00, &(pdnb3_ndfc->term));
|
|
}
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb(cmd, this->IO_ADDR_W);
|
|
}
|
|
|
|
|
|
static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
|
|
{
|
|
return readb(&(pdnb3_ndfc->data));
|
|
}
|
|
|
|
static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (hwctl & 0x1)
|
|
writeb(buf[i], &(pdnb3_ndfc->cmd));
|
|
else if (hwctl & 0x2)
|
|
writeb(buf[i], &(pdnb3_ndfc->addr));
|
|
else
|
|
writeb(buf[i], &(pdnb3_ndfc->data));
|
|
}
|
|
}
|
|
|
|
static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
buf[i] = readb(&(pdnb3_ndfc->data));
|
|
}
|
|
|
|
static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
if (buf[i] != readb(&(pdnb3_ndfc->data)))
|
|
return i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pdnb3_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
/*
|
|
* Blocking read to wait for NAND to be ready
|
|
*/
|
|
readb(&(pdnb3_ndfc->wait));
|
|
|
|
/*
|
|
* Return always true
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CONFIG_SYS_NAND_BASE;
|
|
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
|
|
/* Set address of NAND IO lines (Using Linear Data Access Region) */
|
|
nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
|
|
nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
|
|
/* Reference hardware control function */
|
|
nand->cmd_ctrl = pdnb3_nand_hwcontrol;
|
|
nand->read_byte = pdnb3_nand_read_byte;
|
|
nand->write_buf = pdnb3_nand_write_buf;
|
|
nand->read_buf = pdnb3_nand_read_buf;
|
|
nand->verify_buf = pdnb3_nand_verify_buf;
|
|
nand->dev_ready = pdnb3_nand_dev_ready;
|
|
return 0;
|
|
}
|
|
#endif
|