mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
75b942df87
The implicit fallback mechanism for searching the whole MDIO bus for at
least one PHY has been gone with the following commit b882005a18
("drivers/net/fec: phy_init: remove redundant logic"). This lead to the
Ethernet driver erroring out as follows:
Net: Could not get PHY for FEC0: addr -19
eth-1: fec@400d1000
Colibri VFxx # dhcp
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
No ethernet found.
Could not get PHY for FEC0: addr -19
Colibri VFxx #
This commit adds an explicit PHY node which makes it work again.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
243 lines
6.2 KiB
Text
243 lines
6.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* Copyright 2014-2019 Toradex AG
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "vf.dtsi"
|
|
#include "vf610-pinfunc.h"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
aliases {
|
|
usb0 = &ehci0; /* required for ums */
|
|
};
|
|
|
|
reg_usbh_vbus: regulator-usbh-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh1_reg>;
|
|
regulator-name = "VCC_USB[1-4]";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN */
|
|
};
|
|
};
|
|
|
|
&dspi1 {
|
|
bus-num = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dspi1>;
|
|
status = "okay";
|
|
|
|
spi_cmd: sspi@0 {
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
};
|
|
};
|
|
|
|
&ehci0 {
|
|
dr_mode = "otg";
|
|
fsl,cdet-gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
vbus-supply = <®_usbh_vbus>;
|
|
};
|
|
|
|
&esdhc1 {
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Ethernet */
|
|
&fec1 {
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
max-speed = <100>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0>;
|
|
status = "okay";
|
|
|
|
/* M41T0M6 real time clock on carrier board */
|
|
rtc: m41t0m6@68 {
|
|
compatible = "st,m41t0";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ddr>;
|
|
|
|
pinctrl_ddr: ddrgrp {
|
|
fsl,pins = <
|
|
VF610_PAD_DDR_A15__DDR_A_15 0x180
|
|
VF610_PAD_DDR_A14__DDR_A_14 0x180
|
|
VF610_PAD_DDR_A13__DDR_A_13 0x180
|
|
VF610_PAD_DDR_A12__DDR_A_12 0x180
|
|
VF610_PAD_DDR_A11__DDR_A_11 0x180
|
|
VF610_PAD_DDR_A10__DDR_A_10 0x180
|
|
VF610_PAD_DDR_A9__DDR_A_9 0x180
|
|
VF610_PAD_DDR_A8__DDR_A_8 0x180
|
|
VF610_PAD_DDR_A7__DDR_A_7 0x180
|
|
VF610_PAD_DDR_A6__DDR_A_6 0x180
|
|
VF610_PAD_DDR_A5__DDR_A_5 0x180
|
|
VF610_PAD_DDR_A4__DDR_A_4 0x180
|
|
VF610_PAD_DDR_A3__DDR_A_3 0x180
|
|
VF610_PAD_DDR_A2__DDR_A_2 0x180
|
|
VF610_PAD_DDR_A1__DDR_A_1 0x180
|
|
VF610_PAD_DDR_A0__DDR_A_0 0x180
|
|
VF610_PAD_DDR_BA2__DDR_BA_2 0x180
|
|
VF610_PAD_DDR_BA1__DDR_BA_1 0x180
|
|
VF610_PAD_DDR_BA0__DDR_BA_0 0x180
|
|
VF610_PAD_DDR_CAS__DDR_CAS_B 0x180
|
|
VF610_PAD_DDR_CKE__DDR_CKE_0 0x180
|
|
VF610_PAD_DDR_CLK__DDR_CLK_0 0x180
|
|
VF610_PAD_DDR_CS__DDR_CS_B_0 0x180
|
|
VF610_PAD_DDR_D15__DDR_D_15 0x10180
|
|
VF610_PAD_DDR_D14__DDR_D_14 0x10180
|
|
VF610_PAD_DDR_D13__DDR_D_13 0x10180
|
|
VF610_PAD_DDR_D12__DDR_D_12 0x10180
|
|
VF610_PAD_DDR_D11__DDR_D_11 0x10180
|
|
VF610_PAD_DDR_D10__DDR_D_10 0x10180
|
|
VF610_PAD_DDR_D9__DDR_D_9 0x10180
|
|
VF610_PAD_DDR_D8__DDR_D_8 0x10180
|
|
VF610_PAD_DDR_D7__DDR_D_7 0x10180
|
|
VF610_PAD_DDR_D6__DDR_D_6 0x10180
|
|
VF610_PAD_DDR_D5__DDR_D_5 0x10180
|
|
VF610_PAD_DDR_D4__DDR_D_4 0x10180
|
|
VF610_PAD_DDR_D3__DDR_D_3 0x10180
|
|
VF610_PAD_DDR_D2__DDR_D_2 0x10180
|
|
VF610_PAD_DDR_D1__DDR_D_1 0x10180
|
|
VF610_PAD_DDR_D0__DDR_D_0 0x10180
|
|
VF610_PAD_DDR_DQM1__DDR_DQM_1 0x10180
|
|
VF610_PAD_DDR_DQM0__DDR_DQM_0 0x10180
|
|
VF610_PAD_DDR_DQS1__DDR_DQS_1 0x10180
|
|
VF610_PAD_DDR_DQS0__DDR_DQS_0 0x10180
|
|
VF610_PAD_DDR_RAS__DDR_RAS_B 0x180
|
|
VF610_PAD_DDR_WE__DDR_WE_B 0x180
|
|
VF610_PAD_DDR_ODT1__DDR_ODT_0 0x180
|
|
VF610_PAD_DDR_ODT0__DDR_ODT_1 0x180
|
|
VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x180
|
|
VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2 0x180
|
|
VF610_PAD_DDR_RESETB 0x180
|
|
>;
|
|
};
|
|
|
|
pinctrl_dspi1: dspi1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD5__DSPI1_CS0 0x33e2
|
|
VF610_PAD_PTD6__DSPI1_SIN 0x33e1
|
|
VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
|
|
VF610_PAD_PTD8__DSPI1_SCK 0x33e2
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc1: esdhc1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
|
|
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
|
|
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
|
|
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
|
|
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
|
|
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
|
|
VF610_PAD_PTB20__GPIO_42 0x219d
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA6__RMII_CLKOUT 0x30df
|
|
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30df
|
|
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df
|
|
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30df
|
|
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30df
|
|
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30df
|
|
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30df
|
|
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30df
|
|
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30df
|
|
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30df
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c0: i2c0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB14__I2C0_SCL 0x37ff
|
|
VF610_PAD_PTB15__I2C0_SDA 0x37ff
|
|
>;
|
|
};
|
|
|
|
pinctrl_nfc: nfcgrp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD23__NF_IO7 0x28df
|
|
VF610_PAD_PTD22__NF_IO6 0x28df
|
|
VF610_PAD_PTD21__NF_IO5 0x28df
|
|
VF610_PAD_PTD20__NF_IO4 0x28df
|
|
VF610_PAD_PTD19__NF_IO3 0x28df
|
|
VF610_PAD_PTD18__NF_IO2 0x28df
|
|
VF610_PAD_PTD17__NF_IO1 0x28df
|
|
VF610_PAD_PTD16__NF_IO0 0x28df
|
|
VF610_PAD_PTB24__NF_WE_B 0x28c2
|
|
VF610_PAD_PTB25__NF_CE0_B 0x28c2
|
|
VF610_PAD_PTB27__NF_RE_B 0x28c2
|
|
VF610_PAD_PTC26__NF_RB_B 0x283d
|
|
VF610_PAD_PTC27__NF_ALE 0x28c2
|
|
VF610_PAD_PTC28__NF_CLE 0x28c2
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart0: uart0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB10__UART0_TX 0x11af
|
|
VF610_PAD_PTB11__UART0_RX 0x11af
|
|
VF610_PAD_PTB12__UART0_RTS 0x11af
|
|
VF610_PAD_PTB13__UART0_CTS 0x11af
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1_reg: gpio_usb_vbus {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD4__GPIO_83 0x22ed
|
|
>;
|
|
};
|
|
};
|
|
|
|
&nfc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nfc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
status = "okay";
|
|
};
|