mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
685 lines
20 KiB
C
685 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <linux/fb.h>
|
|
#include <ipu_pixfmt.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <pwm.h>
|
|
#include <micrel.h>
|
|
#include <spi.h>
|
|
#include <video.h>
|
|
#include <../drivers/video/ipu.h>
|
|
#if defined(CONFIG_VIDEO_BMP_LOGO)
|
|
#include <bmp_logo.h>
|
|
#endif
|
|
|
|
#define USDHC2_PAD_CTRL (PAD_CTL_SPEED_LOW | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
|
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
/* 4.3 display controller */
|
|
#define ECSPI1_CS0 IMX_GPIO_NR(4, 9)
|
|
#define ECSPI4_CS0 IMX_GPIO_NR(3, 29)
|
|
#elif (CONFIG_SYS_BOARD_VERSION == 3)
|
|
#define ECSPI1_CS0 IMX_GPIO_NR(2, 30) /* NOR flash */
|
|
/* 4.3 display controller */
|
|
#define ECSPI1_CS1 IMX_GPIO_NR(4, 10)
|
|
#endif
|
|
|
|
#define SOFT_RESET_GPIO IMX_GPIO_NR(7, 13)
|
|
#define SD2_DRIVER_ENABLE IMX_GPIO_NR(7, 8)
|
|
|
|
struct i2c_pads_info i2c_pad_info3 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 | PC,
|
|
.gp = IMX_GPIO_NR(1, 5)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
|
|
.gp = IMX_GPIO_NR(1, 6)
|
|
}
|
|
};
|
|
|
|
struct i2c_pads_info i2c_pad_info4 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_GPIO_7__I2C4_SCL | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_7__GPIO1_IO07 | PC,
|
|
.gp = IMX_GPIO_NR(1, 7)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_GPIO_8__I2C4_SDA | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_8__GPIO1_IO08 | PC,
|
|
.gp = IMX_GPIO_NR(1, 8)
|
|
}
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart1_pads[] = {
|
|
MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D19__UART1_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D20__UART1_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart2_pads[] = {
|
|
MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart3_pads[] = {
|
|
MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D31__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart4_pads[] = {
|
|
MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const gpio_pads[] = {
|
|
/* LED enable*/
|
|
MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LED yellow */
|
|
MX6_PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LED red */
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
MX6_PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
#elif (CONFIG_SYS_BOARD_VERSION == 3)
|
|
MX6_PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
#endif
|
|
/* LED green */
|
|
MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LED blue */
|
|
MX6_PAD_EIM_EB1__GPIO2_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* spi flash WP protect */
|
|
MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* spi CS 0 */
|
|
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* spi bus #2 SS driver enable */
|
|
MX6_PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* RST_LOC# PHY reset input (has pull-down!)*/
|
|
MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* SD 2 level shifter output enable */
|
|
MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* SD1 card detect input */
|
|
MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* SD1 write protect input */
|
|
MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* SD2 card detect input */
|
|
MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* SD2 write protect input */
|
|
MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* Touchscreen IRQ */
|
|
MX6_PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const misc_pads[] = {
|
|
/* USB_OTG_ID = GPIO1_24*/
|
|
MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* H1 Power enable = GPIO1_0*/
|
|
MX6_PAD_GPIO_0__USB_H1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* OTG Power enable = GPIO4_15*/
|
|
MX6_PAD_KEY_ROW4__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const enet_pads[] = {
|
|
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const backlight_pads[] = {
|
|
/* backlight PWM brightness control */
|
|
MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* backlight enable */
|
|
MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LCD power enable */
|
|
MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const ecspi1_pads[] = {
|
|
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
#elif (CONFIG_SYS_BOARD_VERSION == 3)
|
|
MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
MX6_PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
#endif
|
|
};
|
|
|
|
static void setup_iomux_enet(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
|
}
|
|
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
iomux_v3_cfg_t const ecspi4_pads[] = {
|
|
MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
#endif
|
|
|
|
static iomux_v3_cfg_t const display_pads[] = {
|
|
MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL),
|
|
MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
|
|
MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
|
|
MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
|
|
MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
|
|
MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
|
|
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
|
|
MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
|
|
MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
|
|
MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
|
|
MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
|
|
MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
|
|
MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
|
|
MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
|
|
MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
|
|
MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
|
|
MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
|
|
MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
|
|
MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
|
|
MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
|
|
MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
|
|
MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
|
|
MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18,
|
|
MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19,
|
|
MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20,
|
|
MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21,
|
|
MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22,
|
|
MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
|
|
};
|
|
|
|
int board_spi_cs_gpio(unsigned bus, unsigned cs)
|
|
{
|
|
if (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS)
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
return IMX_GPIO_NR(5, 2);
|
|
|
|
if (bus == 0 && cs == 0)
|
|
return IMX_GPIO_NR(4, 9);
|
|
#elif (CONFIG_SYS_BOARD_VERSION == 3)
|
|
return ECSPI1_CS0;
|
|
|
|
if (bus == 0 && cs == 1)
|
|
return ECSPI1_CS1;
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
static void setup_spi(void)
|
|
{
|
|
int i;
|
|
|
|
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
|
|
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads));
|
|
#endif
|
|
|
|
for (i = 0; i < 4; i++)
|
|
enable_spi_clk(true, i);
|
|
|
|
gpio_direction_output(ECSPI1_CS0, 1);
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
gpio_direction_output(ECSPI4_CS1, 0);
|
|
/* set cs0 to high (second device on spi bus #4) */
|
|
gpio_direction_output(ECSPI4_CS0, 1);
|
|
#elif (CONFIG_SYS_BOARD_VERSION == 3)
|
|
gpio_direction_output(ECSPI1_CS1, 1);
|
|
#endif
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
switch (CONFIG_MXC_UART_BASE) {
|
|
case UART1_BASE:
|
|
imx_iomux_v3_setup_multiple_pads(uart1_pads,
|
|
ARRAY_SIZE(uart1_pads));
|
|
break;
|
|
case UART2_BASE:
|
|
imx_iomux_v3_setup_multiple_pads(uart2_pads,
|
|
ARRAY_SIZE(uart2_pads));
|
|
break;
|
|
case UART3_BASE:
|
|
imx_iomux_v3_setup_multiple_pads(uart3_pads,
|
|
ARRAY_SIZE(uart3_pads));
|
|
break;
|
|
case UART4_BASE:
|
|
imx_iomux_v3_setup_multiple_pads(uart4_pads,
|
|
ARRAY_SIZE(uart4_pads));
|
|
break;
|
|
}
|
|
}
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
/* control data pad skew - devaddr = 0x02, register = 0x04 */
|
|
ksz9031_phy_extended_write(phydev, 0x02,
|
|
MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
|
|
/* rx data pad skew - devaddr = 0x02, register = 0x05 */
|
|
ksz9031_phy_extended_write(phydev, 0x02,
|
|
MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
|
|
/* tx data pad skew - devaddr = 0x02, register = 0x06 */
|
|
ksz9031_phy_extended_write(phydev, 0x02,
|
|
MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
|
|
/* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
|
|
ksz9031_phy_extended_write(phydev, 0x02,
|
|
MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
|
|
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
setup_iomux_enet();
|
|
return cpu_eth_init(bis);
|
|
}
|
|
|
|
static int rotate_logo_one(unsigned char *out, unsigned char *in)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 0; i < BMP_LOGO_WIDTH; i++)
|
|
for (j = 0; j < BMP_LOGO_HEIGHT; j++)
|
|
out[j * BMP_LOGO_WIDTH + BMP_LOGO_HEIGHT - 1 - i] =
|
|
in[i * BMP_LOGO_WIDTH + j];
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Rotate the BMP_LOGO (only)
|
|
* Will only work, if the logo is square, as
|
|
* BMP_LOGO_HEIGHT and BMP_LOGO_WIDTH are defines, not variables
|
|
*/
|
|
void rotate_logo(int rotations)
|
|
{
|
|
unsigned char out_logo[BMP_LOGO_WIDTH * BMP_LOGO_HEIGHT];
|
|
unsigned char *in_logo;
|
|
int i, j;
|
|
|
|
if (BMP_LOGO_WIDTH != BMP_LOGO_HEIGHT)
|
|
return;
|
|
|
|
in_logo = bmp_logo_bitmap;
|
|
|
|
/* one 90 degree rotation */
|
|
if (rotations == 1 || rotations == 2 || rotations == 3)
|
|
rotate_logo_one(out_logo, in_logo);
|
|
|
|
/* second 90 degree rotation */
|
|
if (rotations == 2 || rotations == 3)
|
|
rotate_logo_one(in_logo, out_logo);
|
|
|
|
/* third 90 degree rotation */
|
|
if (rotations == 3)
|
|
rotate_logo_one(out_logo, in_logo);
|
|
|
|
/* copy result back to original array */
|
|
if (rotations == 1 || rotations == 3)
|
|
for (i = 0; i < BMP_LOGO_WIDTH; i++)
|
|
for (j = 0; j < BMP_LOGO_HEIGHT; j++)
|
|
in_logo[i * BMP_LOGO_WIDTH + j] =
|
|
out_logo[i * BMP_LOGO_WIDTH + j];
|
|
}
|
|
|
|
static void enable_display_power(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(backlight_pads,
|
|
ARRAY_SIZE(backlight_pads));
|
|
|
|
/* backlight enable */
|
|
gpio_direction_output(IMX_GPIO_NR(6, 31), 1);
|
|
/* LCD power enable */
|
|
gpio_direction_output(IMX_GPIO_NR(6, 15), 1);
|
|
|
|
/* enable backlight PWM 1 */
|
|
if (pwm_init(0, 0, 0))
|
|
goto error;
|
|
/* duty cycle 500ns, period: 3000ns */
|
|
if (pwm_config(0, 50000, 300000))
|
|
goto error;
|
|
if (pwm_enable(0))
|
|
goto error;
|
|
return;
|
|
|
|
error:
|
|
puts("error init pwm for backlight\n");
|
|
return;
|
|
}
|
|
|
|
static void enable_lvds(struct display_info_t const *dev)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
int reg;
|
|
s32 timeout = 100000;
|
|
|
|
/* set PLL5 clock */
|
|
reg = readl(&ccm->analog_pll_video);
|
|
reg |= BM_ANADIG_PLL_VIDEO_POWERDOWN;
|
|
writel(reg, &ccm->analog_pll_video);
|
|
|
|
/* set PLL5 to 232720000Hz */
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
|
|
reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x26);
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
|
|
reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
|
|
writel(reg, &ccm->analog_pll_video);
|
|
|
|
writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xC0238),
|
|
&ccm->analog_pll_video_num);
|
|
writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xF4240),
|
|
&ccm->analog_pll_video_denom);
|
|
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
|
|
writel(reg, &ccm->analog_pll_video);
|
|
|
|
while (timeout--)
|
|
if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
|
|
break;
|
|
if (timeout < 0)
|
|
printf("Warning: video pll lock timeout!\n");
|
|
|
|
reg = readl(&ccm->analog_pll_video);
|
|
reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
|
|
writel(reg, &ccm->analog_pll_video);
|
|
|
|
/* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
|
|
reg = readl(&ccm->cs2cdr);
|
|
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|
|
| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
|
reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|
|
| (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
|
|
writel(reg, &ccm->cs2cdr);
|
|
|
|
reg = readl(&ccm->cscmr2);
|
|
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
|
|
writel(reg, &ccm->cscmr2);
|
|
|
|
reg = readl(&ccm->chsccdr);
|
|
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
|
|
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
|
|
writel(reg, &ccm->chsccdr);
|
|
|
|
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|
|
| IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|
|
| IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
|
|
| IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|
|
| IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
|
|
| IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|
|
| IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
|
|
writel(reg, &iomux->gpr[2]);
|
|
|
|
reg = readl(&iomux->gpr[3]);
|
|
reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
|
|
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
|
|
<< IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
|
|
writel(reg, &iomux->gpr[3]);
|
|
|
|
return;
|
|
}
|
|
|
|
static void enable_spi_display(struct display_info_t const *dev)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
int reg;
|
|
s32 timeout = 100000;
|
|
|
|
#if defined(CONFIG_VIDEO_BMP_LOGO)
|
|
rotate_logo(3); /* portrait display in landscape mode */
|
|
#endif
|
|
|
|
/*
|
|
* set ldb clock to 28341000 Hz calculated through the formula:
|
|
* (XRES + LEFT_M + RIGHT_M + HSYNC_LEN) *
|
|
* (YRES + UPPER_M + LOWER_M + VSYNC_LEN) * REFRESH)
|
|
* see:
|
|
* https://community.freescale.com/thread/308170
|
|
*/
|
|
ipu_set_ldb_clock(28341000);
|
|
|
|
reg = readl(&ccm->cs2cdr);
|
|
|
|
/* select pll 5 clock */
|
|
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|
|
| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
|
writel(reg, &ccm->cs2cdr);
|
|
|
|
/* set PLL5 to 197994996Hz */
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
|
|
reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x21);
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
|
|
reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
|
|
writel(reg, &ccm->analog_pll_video);
|
|
|
|
writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xfbf4),
|
|
&ccm->analog_pll_video_num);
|
|
writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xf4240),
|
|
&ccm->analog_pll_video_denom);
|
|
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
|
|
writel(reg, &ccm->analog_pll_video);
|
|
|
|
while (timeout--)
|
|
if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
|
|
break;
|
|
if (timeout < 0)
|
|
printf("Warning: video pll lock timeout!\n");
|
|
|
|
reg = readl(&ccm->analog_pll_video);
|
|
reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
|
|
reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
|
|
writel(reg, &ccm->analog_pll_video);
|
|
|
|
/* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
|
|
reg = readl(&ccm->cs2cdr);
|
|
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|
|
| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
|
reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|
|
| (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
|
|
writel(reg, &ccm->cs2cdr);
|
|
|
|
reg = readl(&ccm->cscmr2);
|
|
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
|
|
writel(reg, &ccm->cscmr2);
|
|
|
|
reg = readl(&ccm->chsccdr);
|
|
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
|
|
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
|
|
reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK;
|
|
reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET);
|
|
reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK;
|
|
reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
|
|
writel(reg, &ccm->chsccdr);
|
|
|
|
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|
|
| IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|
|
| IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
|
|
| IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|
|
| IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
|
|
| IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|
|
| IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
|
|
writel(reg, &iomux->gpr[2]);
|
|
|
|
reg = readl(&iomux->gpr[3]);
|
|
reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
|
|
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
|
|
<< IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
|
|
writel(reg, &iomux->gpr[3]);
|
|
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
display_pads,
|
|
ARRAY_SIZE(display_pads));
|
|
|
|
return;
|
|
}
|
|
static void setup_display(void)
|
|
{
|
|
enable_ipu_clock();
|
|
enable_display_power();
|
|
}
|
|
|
|
static void setup_iomux_gpio(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
|
|
}
|
|
|
|
static void set_gpr_register(void)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
writel(IOMUXC_GPR1_APP_CLK_REQ_N | IOMUXC_GPR1_PCIE_RDY_L23 |
|
|
IOMUXC_GPR1_EXC_MON_SLVE |
|
|
(2 << IOMUXC_GPR1_ADDRS0_OFFSET) |
|
|
IOMUXC_GPR1_ACT_CS0,
|
|
&iomuxc_regs->gpr[1]);
|
|
writel(0x0, &iomuxc_regs->gpr[8]);
|
|
writel(IOMUXC_GPR12_ARMP_IPG_CLK_EN | IOMUXC_GPR12_ARMP_AHB_CLK_EN |
|
|
IOMUXC_GPR12_ARMP_ATB_CLK_EN | IOMUXC_GPR12_ARMP_APB_CLK_EN,
|
|
&iomuxc_regs->gpr[12]);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
setup_iomux_gpio();
|
|
|
|
gpio_direction_output(SOFT_RESET_GPIO, 1);
|
|
gpio_direction_output(SD2_DRIVER_ENABLE, 1);
|
|
setup_display();
|
|
set_gpr_register();
|
|
return 0;
|
|
}
|
|
|
|
static void setup_i2c4(void)
|
|
{
|
|
setup_i2c(3, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
|
|
&i2c_pad_info4);
|
|
}
|
|
|
|
static void setup_board_gpio(void)
|
|
{
|
|
/* enable all LEDs */
|
|
gpio_request(IMX_GPIO_NR(2, 13), "LED ena"); /* 25 */
|
|
gpio_direction_output(IMX_GPIO_NR(1, 25), 0);
|
|
|
|
/* switch off Status LEDs */
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
|
|
gpio_direction_output(IMX_GPIO_NR(6, 16), 1);
|
|
gpio_request(IMX_GPIO_NR(2, 28), "LED red"); /* 60 */
|
|
gpio_direction_output(IMX_GPIO_NR(2, 28), 1);
|
|
gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
|
|
gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
|
|
gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
|
|
gpio_direction_output(IMX_GPIO_NR(2, 29), 1);
|
|
#elif (CONFIG_SYS_BOARD_VERSION == 3)
|
|
gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
|
|
gpio_direction_output(IMX_GPIO_NR(6, 16), 0);
|
|
gpio_request(IMX_GPIO_NR(5, 0), "LED red"); /* 128 */
|
|
gpio_direction_output(IMX_GPIO_NR(5, 0), 0);
|
|
gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
|
|
gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
|
|
gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
|
|
gpio_direction_output(IMX_GPIO_NR(2, 29), 0);
|
|
#endif
|
|
}
|
|
|
|
static void setup_board_spi(void)
|
|
{
|
|
/* enable spi bus #2 SS drivers (and spi bus #4 SS1 for rev2b) */
|
|
gpio_direction_output(IMX_GPIO_NR(6, 6), 1);
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
char *my_bootdelay;
|
|
char bootmode = 0;
|
|
char const *panel = env_get("panel");
|
|
|
|
/*
|
|
* Check the boot-source. If booting from NOR Flash,
|
|
* disable bootdelay
|
|
*/
|
|
gpio_request(IMX_GPIO_NR(7, 6), "bootsel0");
|
|
gpio_direction_input(IMX_GPIO_NR(7, 6));
|
|
gpio_request(IMX_GPIO_NR(7, 7), "bootsel1");
|
|
gpio_direction_input(IMX_GPIO_NR(7, 7));
|
|
gpio_request(IMX_GPIO_NR(7, 1), "bootsel2");
|
|
gpio_direction_input(IMX_GPIO_NR(7, 1));
|
|
bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 6)) ? 1 : 0) << 0;
|
|
bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 7)) ? 1 : 0) << 1;
|
|
bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 1)) ? 1 : 0) << 2;
|
|
|
|
if (bootmode == 7) {
|
|
my_bootdelay = env_get("nor_bootdelay");
|
|
if (my_bootdelay != NULL)
|
|
env_set("bootdelay", my_bootdelay);
|
|
else
|
|
env_set("bootdelay", "-2");
|
|
}
|
|
|
|
/* if we have the lg panel, we can initialze it now */
|
|
if (panel)
|
|
if (!strcmp(panel, displays[1].mode.name))
|
|
lg4573_spi_startup(CONFIG_LG4573_BUS,
|
|
CONFIG_LG4573_CS,
|
|
10000000, SPI_MODE_0);
|
|
|
|
return 0;
|
|
}
|