mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
315 lines
7.9 KiB
C
315 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/**
|
|
* ti_usb_phy.c - USB3 and USB3 PHY programming for dwc3
|
|
*
|
|
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Author: Kishon Vijay Abraham I <kishon@ti.com>
|
|
*
|
|
* Taken from Linux Kernel v3.16 (drivers/phy/phy-ti-pipe3.c and
|
|
* drivers/phy/phy-omap-usb2.c) and ported to uboot.
|
|
*
|
|
* "commit 56042e : phy: ti-pipe3: Fix suspend/resume and module reload" for
|
|
* phy-ti-pipe3.c
|
|
*
|
|
* "commit eb82a3 : phy: omap-usb2: Balance pm_runtime_enable() on probe failure
|
|
* and remove" for phy-omap-usb2.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <ti-usb-phy-uboot.h>
|
|
#include <usb/lin_gadget_compat.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#include "linux-compat.h"
|
|
|
|
#define PLL_STATUS 0x00000004
|
|
#define PLL_GO 0x00000008
|
|
#define PLL_CONFIGURATION1 0x0000000C
|
|
#define PLL_CONFIGURATION2 0x00000010
|
|
#define PLL_CONFIGURATION3 0x00000014
|
|
#define PLL_CONFIGURATION4 0x00000020
|
|
|
|
#define PLL_REGM_MASK 0x001FFE00
|
|
#define PLL_REGM_SHIFT 0x9
|
|
#define PLL_REGM_F_MASK 0x0003FFFF
|
|
#define PLL_REGM_F_SHIFT 0x0
|
|
#define PLL_REGN_MASK 0x000001FE
|
|
#define PLL_REGN_SHIFT 0x1
|
|
#define PLL_SELFREQDCO_MASK 0x0000000E
|
|
#define PLL_SELFREQDCO_SHIFT 0x1
|
|
#define PLL_SD_MASK 0x0003FC00
|
|
#define PLL_SD_SHIFT 10
|
|
#define SET_PLL_GO 0x1
|
|
#define PLL_LDOPWDN BIT(15)
|
|
#define PLL_TICOPWDN BIT(16)
|
|
#define PLL_LOCK 0x2
|
|
#define PLL_IDLE 0x1
|
|
|
|
#define OMAP_CTRL_DEV_PHY_PD BIT(0)
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
|
|
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
|
|
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
|
|
|
|
#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3
|
|
#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0
|
|
|
|
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
|
|
|
|
#define AM437X_CTRL_USB2_PHY_PD BIT(0)
|
|
#define AM437X_CTRL_USB2_OTG_PD BIT(1)
|
|
#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
|
|
#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
|
|
|
|
static LIST_HEAD(ti_usb_phy_list);
|
|
typedef unsigned int u32;
|
|
|
|
struct usb3_dpll_params {
|
|
u16 m;
|
|
u8 n;
|
|
u8 freq:3;
|
|
u8 sd;
|
|
u32 mf;
|
|
};
|
|
|
|
struct usb3_dpll_map {
|
|
unsigned long rate;
|
|
struct usb3_dpll_params params;
|
|
struct usb3_dpll_map *dpll_map;
|
|
};
|
|
|
|
struct ti_usb_phy {
|
|
void __iomem *pll_ctrl_base;
|
|
void __iomem *usb2_phy_power;
|
|
void __iomem *usb3_phy_power;
|
|
struct usb3_dpll_map *dpll_map;
|
|
struct list_head list;
|
|
int index;
|
|
};
|
|
|
|
static struct usb3_dpll_map dpll_map_usb[] = {
|
|
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
|
|
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
|
|
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
|
|
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
|
|
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
|
|
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
|
|
{ }, /* Terminator */
|
|
};
|
|
|
|
static inline unsigned int ti_usb3_readl(void __iomem *base, u32 offset)
|
|
{
|
|
return readl(base + offset);
|
|
}
|
|
|
|
static inline void ti_usb3_writel(void __iomem *base, u32 offset, u32 value)
|
|
{
|
|
writel(value, base + offset);
|
|
}
|
|
|
|
#ifndef CONFIG_AM43XX
|
|
static struct usb3_dpll_params *ti_usb3_get_dpll_params(struct ti_usb_phy *phy)
|
|
{
|
|
unsigned long rate;
|
|
struct usb3_dpll_map *dpll_map = phy->dpll_map;
|
|
|
|
rate = get_sys_clk_freq();
|
|
|
|
for (; dpll_map->rate; dpll_map++) {
|
|
if (rate == dpll_map->rate)
|
|
return &dpll_map->params;
|
|
}
|
|
|
|
dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int ti_usb3_dpll_wait_lock(struct ti_usb_phy *phy)
|
|
{
|
|
u32 val;
|
|
do {
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
|
if (val & PLL_LOCK)
|
|
break;
|
|
} while (1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_usb3_dpll_program(struct ti_usb_phy *phy)
|
|
{
|
|
u32 val;
|
|
struct usb3_dpll_params *dpll_params;
|
|
|
|
if (!phy->pll_ctrl_base)
|
|
return -EINVAL;
|
|
|
|
dpll_params = ti_usb3_get_dpll_params(phy);
|
|
if (!dpll_params)
|
|
return -EINVAL;
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
|
|
val &= ~PLL_REGN_MASK;
|
|
val |= dpll_params->n << PLL_REGN_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
|
val &= ~PLL_SELFREQDCO_MASK;
|
|
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
|
|
val &= ~PLL_REGM_MASK;
|
|
val |= dpll_params->m << PLL_REGM_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
|
|
val &= ~PLL_REGM_F_MASK;
|
|
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
|
|
|
|
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
|
|
val &= ~PLL_SD_MASK;
|
|
val |= dpll_params->sd << PLL_SD_SHIFT;
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
|
|
|
|
ti_usb3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
|
|
|
|
return ti_usb3_dpll_wait_lock(phy);
|
|
}
|
|
#endif
|
|
|
|
void ti_usb2_phy_power(struct ti_usb_phy *phy, int on)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(phy->usb2_phy_power);
|
|
|
|
if (on) {
|
|
#if defined(CONFIG_DRA7XX)
|
|
if (phy->index == 1)
|
|
val &= ~OMAP_CTRL_USB2_PHY_PD;
|
|
else
|
|
val &= ~OMAP_CTRL_DEV_PHY_PD;
|
|
#elif defined(CONFIG_AM43XX)
|
|
val &= ~(AM437X_CTRL_USB2_PHY_PD |
|
|
AM437X_CTRL_USB2_OTG_PD);
|
|
val |= (AM437X_CTRL_USB2_OTGVDET_EN |
|
|
AM437X_CTRL_USB2_OTGSESSEND_EN);
|
|
#endif
|
|
} else {
|
|
#if defined(CONFIG_DRA7XX)
|
|
if (phy->index == 1)
|
|
val |= OMAP_CTRL_USB2_PHY_PD;
|
|
else
|
|
val |= OMAP_CTRL_DEV_PHY_PD;
|
|
|
|
#elif defined(CONFIG_AM43XX)
|
|
val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
|
|
AM437X_CTRL_USB2_OTGSESSEND_EN);
|
|
val |= (AM437X_CTRL_USB2_PHY_PD |
|
|
AM437X_CTRL_USB2_OTG_PD);
|
|
#endif
|
|
}
|
|
writel(val, phy->usb2_phy_power);
|
|
}
|
|
|
|
#ifndef CONFIG_AM43XX
|
|
void ti_usb3_phy_power(struct ti_usb_phy *phy, int on)
|
|
{
|
|
u32 val;
|
|
u32 rate;
|
|
rate = get_sys_clk_freq();
|
|
rate = rate/1000000;
|
|
|
|
if (!phy->usb3_phy_power)
|
|
return;
|
|
|
|
val = readl(phy->usb3_phy_power);
|
|
if (on) {
|
|
val &= ~(OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK |
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK);
|
|
val |= (OMAP_CTRL_USB3_PHY_TX_RX_POWERON) <<
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
|
val |= rate <<
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT;
|
|
} else {
|
|
val &= ~OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK;
|
|
val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
|
|
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
|
}
|
|
writel(val, phy->usb3_phy_power);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* ti_usb_phy_uboot_init - usb phy uboot initialization code
|
|
* @dev: struct ti_usb_phy_device containing initialization data
|
|
*
|
|
* Entry point for ti usb phy driver. This driver handles initialization
|
|
* of both usb2 phy and usb3 phy. Pointer to ti_usb_phy_device should be
|
|
* passed containing base address and other initialization data.
|
|
* Returns '0' on success and a negative value on failure.
|
|
*
|
|
* Generally called from board_usb_init() implemented in board file.
|
|
*/
|
|
int ti_usb_phy_uboot_init(struct ti_usb_phy_device *dev)
|
|
{
|
|
struct ti_usb_phy *phy;
|
|
|
|
phy = devm_kzalloc(NULL, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy) {
|
|
dev_err(NULL, "unable to alloc mem for TI USB3 PHY\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
phy->dpll_map = dpll_map_usb;
|
|
phy->index = dev->index;
|
|
phy->pll_ctrl_base = dev->pll_ctrl_base;
|
|
phy->usb2_phy_power = dev->usb2_phy_power;
|
|
phy->usb3_phy_power = dev->usb3_phy_power;
|
|
|
|
#ifndef CONFIG_AM43XX
|
|
ti_usb3_dpll_program(phy);
|
|
ti_usb3_phy_power(phy, 1);
|
|
#endif
|
|
ti_usb2_phy_power(phy, 1);
|
|
mdelay(150);
|
|
list_add_tail(&phy->list, &ti_usb_phy_list);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ti_usb_phy_uboot_exit - usb phy uboot cleanup code
|
|
* @index: index of this controller
|
|
*
|
|
* Performs cleanup of memory allocated in ti_usb_phy_uboot_init.
|
|
* index of _this_ controller should be passed and should match with
|
|
* the index passed in ti_usb_phy_device during init.
|
|
*
|
|
* Generally called from board file.
|
|
*/
|
|
void ti_usb_phy_uboot_exit(int index)
|
|
{
|
|
struct ti_usb_phy *phy = NULL;
|
|
|
|
list_for_each_entry(phy, &ti_usb_phy_list, list) {
|
|
if (phy->index != index)
|
|
continue;
|
|
|
|
ti_usb2_phy_power(phy, 0);
|
|
#ifndef CONFIG_AM43XX
|
|
ti_usb3_phy_power(phy, 0);
|
|
#endif
|
|
list_del(&phy->list);
|
|
kfree(phy);
|
|
break;
|
|
}
|
|
}
|