u-boot/board/esd/pci405/cmd_pci405.c
Wolfgang Denk 0060517ae0 cppcheck cleanup: fix nullPointer errors
There are a number of places where U-Boot intentionally and legally
accesses physical address 0x0000, for example when installing
exception vectors on systems where these are located in low memory.

Add "cppcheck-suppress nullPointer" comments to silence cppcheck
where this is intentional and legal.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-11-07 16:27:07 -05:00

97 lines
1.8 KiB
C

/*
* (C) Copyright 2002-2004
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <net.h>
#include <asm/io.h>
#include <pci.h>
#include <asm/4xx_pci.h>
#include <asm/processor.h>
#include "pci405.h"
#if defined(CONFIG_CMD_BSP)
/*
* Command loadpci: wait for signal from host and boot image.
*/
int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
unsigned int *ptr;
int count = 0;
int count2 = 0;
int i;
char addr[16];
char str[] = "\\|/-";
char *local_args[2];
/*
* Mark sync address
*/
ptr = 0;
/* cppcheck-suppress nullPointer */
*ptr = 0xffffffff;
puts("\nWaiting for image from pci host -");
/*
* Wait for host to write the start address
*/
/* cppcheck-suppress nullPointer */
while (*ptr == 0xffffffff) {
count++;
if (!(count % 100)) {
count2++;
putc(0x08); /* backspace */
putc(str[count2 % 4]);
}
/* Abort if ctrl-c was pressed */
if (ctrlc()) {
puts("\nAbort\n");
return 0;
}
udelay(1000);
}
if (*ptr == PCI_RECONFIG_MAGIC) {
/*
* Save own pci configuration in PRAM
*/
memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN);
ptr = (unsigned int *)PCI_REGS_ADDR + 1;
for (i=0; i<0x40; i+=4) {
pci_read_config_dword(PCIDEVID_405GP, i, ptr++);
}
ptr = (unsigned int *)PCI_REGS_ADDR;
*ptr = crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4);
printf("\nStoring PCI Configuration Regs...\n");
} else {
sprintf(addr, "%08x", *ptr);
/*
* Boot image via bootm
*/
printf("\nBooting Image at addr 0x%s ...\n", addr);
setenv("loadaddr", addr);
local_args[0] = argv[0];
local_args[1] = NULL;
do_bootm (cmdtp, 0, 1, local_args);
}
return 0;
}
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci-image and boot it",
""
);
#endif